... In preparation for this, the N02 NSSC-1 load and ATP setting were completed at 270/23:38 UTC via OR 19146-3, corresponding to an SMS intercept time of 271/10:10:56 UTC. ...
... Uplink NSSC SB004l00_F1 loads and set ATP 16256-0 CCC 4 to K2 to Level 2 16263-0 ARU/PRT for Health and Safety 16258-0 Patch safemode recovery load for SMAC 3 and 6 16264-0 486 FSW Memory Dump 16265-0 Parity Bit Error, Inhibit ATP and resend N02 Load ...
... These remaining steps will be completedѓЉtomorrow following OR 19693 "Load COS FSW Patches and Dump Memory" and OR 19682 "Set WFC3 CSM Memory Monitors.вАЭѓЉ An additional OR will be submitted tomorrow to load the first NSSC-1 N02 load and set the ATP.ѓ ...
... THIS IS LESS THAN THE DESIRED MINIMUM OF 30 MIN Command Loader errors: 2 - 1655/03 INADEQUATE UPLINKS FOR LOAD These occur for the Q02 and N02 loads and is considered normal and acceptable for a health and safety sms. ...
... Forced Load Break ***************** The NSSC1 forced command load break time is 2014.295:04:11:00; the purpose of which is to separate the N01 load from the N02 load. ...
... The following are specific activities of interest in the NSSC-1 SPCs: 067/18:43:07 - Start of N02* SPC Load 067/18:43:14 - PMRSTHPF with RTS ID MRHPF001 is loaded into slot 136 067/18:43:16 - PMSTPSTR with RTS ID MPCLR001 is loaded into slot 137 067/19:00 ...
... The following are specific activities of interest in the NSSC-1 SPCs: 067/18:43:07 - Start of N02* SPC Load 067/18:43:14 - PMRSTHPF with RTS ID MRHPF001 is loaded into slot 136 067/18:43:16 - PMSTPSTR with RTS ID MPCLR001 is loaded into slot 137 067/19:00 ...
... The following are specific activities of interest in the NSSC-1 SPCs: 067/18:43:07 - Start of N02* SPC Load 067/18:43:14 - PMRSTHPF with RTS ID MRHPF001 is loaded into slot 136 067/18:43:16 - PMSTPSTR with RTS ID MPCLR001 is loaded into slot 137 067/19:00 ...