Поиск по:rtm-cs.sinp.msu.ru -
Поискать по всем серверам
На этой странице приведены все страницы сервера rtm-cs.sinp.msu.ru ,которые мы индексируем. Показаны документы 161 - 180 из 1170.
Упорядочить по:
URL
|
дате изменения
161. Loadlin+Win95
... This document describes how to use Loadlin with Windows 95 to boot to Linux. ... 3.2 Determine if you are using the FAT32 file system. ... 3.6 Edit your system files. ... If you are using Windows 95 OSR2 (version 4.00.950b), you will also need to create a file called Winboot.sys with a text editor and place it in the root directory of Drive C. Winboot.sys can be an empty file, just so long as you have the file. ... If you click on "Yes" then Windows enters MS-DOS mode and executes the Linux.bat file...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/Loadlin+Win95.html -- 27.8 Кб -- 04.05.2000
Похожие документы
Похожие документы
162. Linux+Solaris HOWTO
... Describes how to use Linux (x86) and Solaris (x86) together on one machine . ... 2.1 Traditional PC partitions . 2.2 Solaris partition labels . ... And if you want to share data between Solaris and Linux, this has to happen on the Solaris partitions. ... For those of you: you must build your own kernel if you want to share data between Solaris and Linux on one hard disk. ... For this to work you have to put your old boot loader (e.g. lilo) into the boot sector of one primary Linux partition. ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/Linux+Solaris.html -- 17.5 Кб -- 04.05.2000
Похожие документы
Похожие документы
163. NT OS Loader + Linux mini-HOWTO
... This document describes the use of the Windows NT boot loader to start Linux. ... Another Mini-howto recommends not to use NTs "Disk Administartor" to create the Linux swap- and root-partitions. ... boot=/dev/hda2 . ... dd if=/dev/hda2 of=/bootsect.lnx bs=512 count=1 . ... boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINNT [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows NT Workstation ... multi(0)disk(0)rdisk(0)partition(1)\WINNT="Windows NT Workstation ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/Linux+NT-Loader.html -- 9.4 Кб -- 04.05.2000
Похожие документы
Похожие документы
164. The Linux+FreeBSD mini-HOWTO
... You should probably have some experience with Linux or FreeBSD and hard drive partitioning ( fdisk ) before you read this document. ... 3.2 Installing FreeBSD . ... What should have have been seen as ( /dev/hda3 is the FreeBSD slice and /dev/hda4 is the Linux extended partition) is seen as: . ... When you have installed the new kernel, you can mount your UFS filesystems (all the partitions in the FreeBSD slice except the swap partition) with a command like this: mount -t u2fs /dev/hda8 /mnt . ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/Linux+FreeBSD.html -- 23.9 Кб -- 04.05.2000
Похожие документы
Похожие документы
165. The Linux ``Linux-DOS-Win95-OS2'' mini-HOWTO
... When you read about deleting partitions and formatting disks, be smart. ... first clue you in on what I eventually wish to accomplish: --------------------------------------------------------------------- MSDOS v6.22 11MB P1 Primary Partition 1 --------------------------------------------------------------------- Windows '95 350MB P2 Primary Partition 2 --------------------------------------------------------------------- OS/2 Boot Manager 2MB P3 Primary ... Boot Partition 2. ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/Linux+DOS+Win95+OS2.html -- 16.5 Кб -- 04.05.2000
Похожие документы
Похожие документы
166. Leased line Mini HOWTO
... Configuring your modem and pppd to use a 2 wire twisted pair leased line. ... A note on modem configuration and init strings in general: Configure your modem software such as minicom or (m)getty to use the highest possible speed; 57600 bps for 14k4 and 115200 bps for 28k8 or faster modems. ... If it doesn't work, one of the things you should check is the COM port speed; Apparently, a common mistake is to configure the modems with Minicom using one speed and then configure the pppd to use an other. ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/Leased-Line.html -- 15.7 Кб -- 04.05.2000
Похожие документы
Похожие документы
167. Lilo mini-Howto
... The third example shows how to boot a Linux system whose root partition can't be accessed by the BIOS. ... When Lilo boots the system, it uses BIOS calls to load the Linux kernel off the disk (IDE drive, floppy or whatever). ... As a consequence, all of these files must live in a partition that can be accessed by the BIOS (the files are usually located in the /boot directory, this means that only the root partition of your Linux system needs to be accessed via the BIOS). ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/LILO.html -- 22.3 Кб -- 04.05.2000
Похожие документы
Похожие документы
168. The LBX Mini-HOWTO
... LBX (Low Bandwidth X) is an X server extension which performs compression on the X protocol. ... If you use a modem to dial into a service provider, then run X applications on remote machines with their DISPLAYs set to your local machine (or vice versa), LBX will speed up that connection. ... When using LBX, a proxy server ( lbxproxy ) is introduced on the remote side, and the applications talk to that process instead of directly to the LOCAL server. ... On LOCAL: . ... xclock -display LOCAL:0 . ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/LBX.html -- 15.2 Кб -- 04.05.2000
Похожие документы
Похожие документы
169. Linux Install From PPA-Zip drive mini-HOWTO
... This document describes how to install Linux from a parallel port zip drive using the Slackware Linux distribution. ... 2.1 Making the first zip disk. ... My parallel port zip drive shows up on my system as /dev/sda4 I've never seen it come up as any thing else unless I run fdisk on it and change the partition table, creating more than one partition on the disk. ... If you are having trouble accessing your zip drive please see the Linux ZIP drive mini-HOWTO by Grant Guenther . ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/Install-From-ZIP.html -- 19.6 Кб -- 04.05.2000
Похожие документы
Похожие документы
170. ISP-Connectivity
... This document describes how to setup PPP, connect up to your ISP, configure mail and news, get a permanent IP (if available), get a domain name, and have a bonda fide system running in a little over thirty minutes. ... 2.1 Talking and Communicating with pppd and chat . ... Modem just tells pppd that it's a serial/modem based connection. ... For example, below this johnny character is using an ISP that just dumps him to a shell, requiring him to type ppp to get a ppp connection. ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/ISP-Connectivity.html -- 15.3 Кб -- 04.05.2000
Похожие документы
Похожие документы
171. IPMasquerading+Napster mini-HOWTO
... Currently 6 systems behind the IPMasq'd machine, 4 using Napster. ... Now login to your IPMasq'd system and modify a startup file of your choice (I choose to use /etc/rc.d/rc.local) The following lines pass the connection to the Napster clients running on the hosts behind your IPMasq'd system . (add them to the startup file - you'll need to one command for each host using Napster ) / usr / sbin / ipmasqadm portfw -a -P tcp -L xxx.xxx.xxx.xxx 6702 -R 192.168.1.2 6702 / usr / sbin / ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/IPMasquerading+Napster.html -- 8.1 Кб -- 04.05.2000
Похожие документы
Похожие документы
172. IP Sub-Networking Mini-Howto
... This document describes why and how to subnetwork an IP network - that is using a single A, B or C Class network number to function correctly on several interconnected networks. ... Class C IP network numbers use the leftmost 24 bits (the leftmost three bytes) to identify the network, leaving 8 bits (the rightmost byte) to identify host interfaces. ... A network number will always have the interface (host) bits of the address space set to 0 (unless the network is sub-networked - as we shall see); . ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/IP-Subnetworking.html -- 25.9 Кб -- 04.05.2000
Похожие документы
Похожие документы
173. Linux I/O port programming mini-HOWTO
... This HOWTO document describes programming hardware I/O ports and waiting for small periods of time in user-mode Linux programs running on the Intel x86 architecture. ... This document is a descendant of the very small IO-Port mini-HOWTO by the same author. ... See the Linux HOWTO copyright for details. ... Routines for accessing I/O ports are in /usr/include/asm/io.h (or linux/include/asm-i386/io.h in the kernel source distribution). ... Then, to actually accessing the ports.. ... Bit 5 PE (1=high) ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/IO-Port-Programming.html -- 30.4 Кб -- 04.05.2000
Похожие документы
Похожие документы
174. Home-Network-mini-HOWTO
... Your Linux computer has two network cards installed in it and both are compatible with Linux. ... Connect the eth0 card on the Linux box to the cable modem or ADSL box using the cable supplied by the service provider during their install (or one you know works in that configuration. ... Connect the eth1 card on the Linux box to the hub with a straight-through cable. ... This means that your Linux computer will likely be a DHCP server on your eth1 interface, and a DHCP client on your eth0 interface. ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/Home-Network-mini-HOWTO.html -- 38.2 Кб -- 04.05.2000
Похожие документы
Похожие документы
175. Handspring-Visor mini-HOWTO
... Using the Visor with Linux and your USB port . 1.1 About this Document . ... 2.2 Getting your kernel to support USB . ... I recieved my Handvisor today, and have struggled getting it to work, and found no good HOWTO yet, so thought i'd make one. ... To make the Visor drivers work, we need to finish making the USB Serial Converter working. ... You may also try newwer versions, when they appear. tar xvzf pilot-link.0.9.3.tar.gz cd pilot-link.0.9.3 ./configure --prefix=/usr/visor make make install . ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/Handspring-Visor.html -- 9.5 Кб -- 04.05.2000
Похожие документы
Похожие документы
176. Firewall Piercing mini-HOWTO
... Directions for using ppp over telnet to do network stuff transparently through an Internet firewall. ... 4.2 fwprc . ... I hereby disclaim all responsibility for this hack. ... Even though I rewrote most everything but the disclaimers, I'm indebted to Barak Pearlmutter mailto:bap@cs.unm.edu for his Term-Firewall mini-HOWTO: I think there was a necessity for a mini-HOWTO about piercing firewalls, and despite its shortcomings, his mini-HOWTO was a model and an encouragement. ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/Firewall-Piercing.html -- 19.7 Кб -- 04.05.2000
Похожие документы
Похожие документы
177. Linux simple fax printer server mini-HOWTO (faxsrv-mini-HOWTO)
... This document describes in details one of the simplest ways to setup fax server on your Linux system. The fax is available to the users on the local host and to network users. 2.1 What is a fax printer server ? ... The efax will find the fax number from the print Job number and will send the fax. ... Setting efax as fax print server includes few problems As I worked it out few times, I decided to collect this wisdom in this small mini-HOWTO, comments are welcome at <erez@newplaces.com> . ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/Fax-Server.html -- 8.9 Кб -- 04.05.2000
Похожие документы
Похожие документы
178. FTP mini-HOWTO
... How to use ftp clients and servers . ... 3.3 File transfer types . ... FTP (File Transfer Protocol) is a client/server protocol that allows a user to transfer files to and from a remote network site. ... First, you'd change to the /incoming directory (most public FTP servers have a directory, usually called incoming or uploads, where files can be uploaded), then you'd use the put command: . ... You can remove a file on the remote server using the delete command, or rmdir to remove a directory. ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/FTP.html -- 23.7 Кб -- 04.05.2000
Похожие документы
Похожие документы
179. FDU
... How to fix ugly and unreadable X Window fonts. ... Other programs use fonts that are ridiculously tiny and unreadable. ... The first place to look when seeking to cure font problems is the XF86Config file. ( /usr/X11/lib/X11/XF86Config or /etc/X11/XF86Config are the usual locations.) ... FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/FDU.html -- 18.2 Кб -- 04.05.2000
Похожие документы
Похожие документы
180. Linux Ext2fs Undeletion mini-HOWTO
... Oh, and delete all those Emacs backup files. ... This mini-Howto attempts to provide hints on how to retrieve deleted files from an ext2 file system. ... So when the operating system is told to delete a file, it assumes that the blocks used by that file are fair game when it wants to allocate space for a new file. ... Now, the kernel implementation for all versions up to and including 2.0.36 unfortunately zeroes all indirect blocks (and doubly indirect blocks, and so on) when deleting a file. ...
[
Сохраненная копия
]
Ссылки http://rtm-cs.sinp.msu.ru/manual/howto/mini/Ext2fs-Undeletion.html -- 48.5 Кб -- 04.05.2000
Похожие документы
Похожие документы