Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.spm.genebee.msu.ru/manual/en/node96.html
Дата изменения: Fri Feb 4 20:38:59 2005 Дата индексирования: Mon Oct 1 20:48:40 2012 Кодировка: |
The angle between two lines is measured in Angle Mode. The first line and the second line are built by selecting the start point with Left Button of the Mouse and moving the Mouse with a pressed Button to the end point. The angle between the line and the horizontal line is shown in the right lower corner of the Program Window when you draw this line. Also the angle in vertical direction between the selected points is shown.