|
Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://www.spm.genebee.msu.ru/manual/en/node73.html
Дата изменения: Fri Feb 4 20:38:59 2005 Дата индексирования: Mon Oct 1 21:24:10 2012 Кодировка: |
Russian
It is possible to turn on sound signals, that alerts user that probe is too
close to the sample or, vise versa, is too far from the sample during scanning.
In a Runtime information window a ![\includegraphics[height=10pt]{buttons/spmsoundoff}](img59.png){kind=small}
button (or ![\includegraphics[height=10pt]{buttons/spmsound}](img60.png){kind=small}
button)
existed. If a speaker that is shown on the button is crossed, than
sound signals are disabled, if not - they are enabled.
To change its state just click on it.
Russian