|
Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://rtm-cs.sinp.msu.ru/manual/howto/mini/call-back-mini-HOWTO.html
Дата изменения: Thu May 4 20:31:32 2000 Дата индексирования: Mon Oct 1 21:30:24 2012 Кодировка: |
stona@fizyka.umcs.lublin.pl
I'll will be waiting for all opinions about this document. I have tried to gather information as complete as possible. Tell me when your find any mistakes. I'll be grateful to people who will send me any suggestions or corrections. Their contributions will make this document better. I don't mind answering your questions but I'd rather you read the whole article first.
This document can by published under the conditions of Linux Documentation Project. Get in touch with the author if you can't get this license. This document is free.
Most of us use the Internet in a place of work. However we offen need the net at home or outside the place of work. It may be possible that the work from home is cheaper then from a company building. I think that the best solution is to install call-back software on the Linux server. Call-back makes it possible to re-call index number at the cost of the company. I'll try to present how it works. An entitled person calls modem is varied for the first time in Linux server. Then on the user's side the "hang up modem" is switched on. At the same time Linux calls the user. User is verified again. We have connection and the server is charged. The user pays only for the initiation of connection. The double verification and extra options in the call-back program unable the unsuitable persons to charge our bill. We can restrict the access to the connection only to corporation network or Internet. Call-back is very flexible. Below, I'll try to present the configuration of a call-back server on Linux system and I'll show you how to set up your computer for re-calling the connection.
The administrators prefer different modem but while buying a modem we should remember about certain rules:
When we have the suitable modem we have to set it up in our system. We have to check on which com our modem is. Then we have to make a symbolic link to this hardware and /dev/modem. For example, if we have the modem for the 2nd com we write:
ln -s /dev/cua1 /dev/modem
We check it
lrwxrwxrwx 1 root uucp 9 Sep 19 19:10 /dev/modem -> /dev/cua1
If we have the modem on different com we have to remember that
/dev/cua0 is com1 /dev/cua1 is com2 /dev/cua2 is com3 /dev/cua3 is com4
For new kernels:
/dev/ttyS0 is com1 /dev/ttyS1 is com2 /dev/ttyS2 is com3 /dev/ttyS3 is com4
Now, we check our configuration using the program minicom.
The first step to make the call-back on Linux accessible is to set up a suitable parameter in kernel. Then we check whether our kernel serves the protocol ppp. If you don't have ppp in your kernel or in module you will have to compile your kernel and add ppp. You will find more information in Kernel-HOWTO. OK. We have a good kernel. Now, we have to set up software to our system. The call-back program is a part of mgetty-sendfax and ppp. You will find it all in your distribution. Because call-back system we have double verification and we create a user who will be running ppp on the side of server.
pppuser:klkIOM89mn65H:230:PPP Dialin:/home/pppuser:/etc/ppp/ppplogin
Then change the password. This user doesn't have a usual shell but
a file /etc/ppp/ppplogin. We have to make it ourselves. For example
vi /etc/ppp/ppplogin and we type:
#!/bin/sh exec /usr/sbin/pppd -detach 192.168.1.1:192.168.1.2
where the address 192.168.1.1 is the address of server with modem and
the address 192.168.1.2 is the address which we assigned to our modem.
We set up executable options for this file. Because we will use the
ppp demon we have to set up the options for this demon. We edit file
/etc/ppp/options:
netmask 255.255.255.0 proxyarp lock crtscts modem
Proxyarp is the most important from the above options, because you
can go to Internet by the modem in the server. The remaining options
are used control your modem. Your user can work only in local network
if you remove proxyarp option. You have to see PPP-HOWTO and man pppd
for more information. We will set up our modem now. Our server must
be ready to receive a connection after start. We edit file /etc/inittab
and we add it's to modem on the 2en com.
s1:2345:respawn:/sbin/mgetty ttyS1 -D /dev/ttyS1 vt100
For the 1st com line looks as follows:
s0:2345:respawn:/sbin/mgetty ttyS1 -D /dev/ttyS1 vt100
We make init q. If we don't have information about any mistakes in
logs we go to the next step. We come back to directory /etc/ppp and
create options.ttyS1 (for modem com1 options.ttyS0)
IP_local: IP_remote
for our net it will be
192.168.1.1:192.168.1.2
We have done a lot work so far. Now, we check the file
/etc/mgetty+sendfax/login.config. The most important line is:
/AutoPPP/ - a_ppp /usr/sbin/pppd auth -chap +pap login detach kdebug 7 debug
The remaining lines can be marked #.
We have to set up suid for ppp demon, because pppuser has to run pppd and make interface work.
chmod u+s /usr/sbin/pppd
and its effect is:
-rwsr-xr-x 1 root root 106892 Jan 11 1999 /usr/sbin/pppd
I think that it is a good idea is to add it to cron becouse I had a problem after restart of my server pppd changed preference. For verification we call to Linux. We use scripts for it. If we do this in MS Windows we mark options "call out a terminal after connection". We login as pppuser with its password. I hope that all is OK.
We can already call our Linux. Now it's time Linux called us. It's
not very diffucalt. We have to edit only two files. We crate o file
/etc/mgetty+sendfax/callback.conf and we leave it empty.
Then we have to ask our users for their phone number. It's time to
write the numbers we have connected earlier. In order to do it we
edit /etc/mgetty+sendfax/login.conf and add line:
call - - /usr/sbin/callback - S 123456
where call is a pseudo-user needed to initiate the connection. The
line in the /etc/mgetty+sendfax/login.conf puts in motion the program
calling the given number (in this case it's 123456). The same procedures
can be applied to other users. I'll try to explain how it works. When
we call a server. It asks us to give verification. We login as pseudo-user,
in this case it calls. The script in our computer hangs up the modem.
We wait and the connection is cut off. The program call-back starts
working and recalls us. We verify ourselves again as pppuser with
password. We combine the connection and interface ppp. It's all. The
configuration of work-stations is very simple. When you have the MS
Windows, you have to install dal-up for your number. In the modem
propriety we find " propriety--->extended---> extra options" where
we write.
&c0 s0=1
We close the window and call. We log in according to the description given above. If we want to use Linux, we must refer to the script. It's difficult to give only one good script for our Linux. A good configuration of ppp in the system is of primary importance. (You can call it as pppuser through the scripts first).The scripts below were whiten by A. Gozdz. I suggest putting everything to catalogue. It is only my suggestion & you don't have to start the scripts here. Detailed information cocernig writing scripts on Linux can found in PPP-HOWTO.
THIS SCRIPTS WORK WELL WITH SLACKWARE
The configuration file of demon ppp (an example for modem on com2)
/etc/options
lock defaultroute noipdefault modem /dev/cua1 33600 crtscts debug passive asyncmap 0
and the specific scripts
#!/bin/bash teksta="Connection failed" tekstb="Probably, You will be connect" # /sbin/setserial /dev/cua1 spd_vhi killall -INT pppd 2>/dev/null rm -f /var/lock/LCK* /var/run/ppp*.pid (/usr/sbin/pppd -detach /dev/ttyS1 115200 \ connect "/usr/sbin/chat -v -f /etc/ppp/pppcallback" &) || \ (echo $teksta; ls marsss >/dev/null; exit 1) echo $tekstb exit 0
TIMEOUT 60 ABORT 'ERROR' ABORT 'BUSY' ABORT 'NO ANSWER' ABORT 'NO DIALTONE' ABORT '\nVOICE\r' ABORT '\nRINGING\r\n\r\nRINGING\r' '' AT&FH0 <p>'OK-+++\c-OK' 'AT&C0S0=1' TIMEOUT 75 OK ATDT123456 CONNECT '' ogin:-ogin: ppp_pseudouser '\nNO CARRIER\r' '' TIMEOUT 180 '\nRING\r' AT&C1A CONNECT '' TIMEOUT 20 ogin:-ogin: pppuser sword:-sword password_for_pppuser
THE SCRIPTS WHICH WORK GOOD WITH LINUX RED HAT 6.x
lock defaultroute noipdefault modem 33600 crtscts debug passive asyncmap 0
TIMEOUT 5 ABORT 'ERROR' ABORT 'BUSY' ABORT 'NO ANSWER' ABORT 'NO DIALTONE' ABORT '\nVOICE\r' ABORT '\nRINGING\r\n\r\nRINGING\r' '' AT&FH0 'OK-+++\c-OK' 'AT&C0S0=1' TIMEOUT 40 OK ATDT5376443 CONNECT '' ogin:-ogin: ppp-pseudo-user '\nNO CARRIER\r' '' TIMEOUT 180 '\nRING\r' AT&C1A CONNECT '' TIMEOUT 20 ogin:-ogin: pppuser sword:-sword password_for_ppuser
#!/bin/bash teksta="Connection failed" tekstb="Probably, You will be connect" # /sbin/setserial /dev/cua1 spd_vhi killall -INT pppd 2>/dev/null rm -f /var/lock/LCK* /var/run/ppp*.pid (/usr/sbin/pppd -detach call ppp_call &) || \ (echo $teksta; ls marsss >/dev/null; exit 1) echo $tekstb exit 0
The Configuration of call-back is not complicated. The most important thing is a proper arrangement of ppp server on Linux. I don't know a better way of setting up an access - server. The configuration presented above is a result of numerous attempts & it can be done in a different way. That's way I suggest reading all documents concerning this issue man pppd, HOWTO-NET3.