|
Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://rtm-cs.sinp.msu.ru/manual/howto/Cyrillic-HOWTO.html
Дата изменения: Thu May 4 19:10:53 2000 Дата индексирования: Mon Oct 1 21:11:27 2012 Кодировка: |
abel@bfr.co.il), Berger
Financial Research Ltd.
This document covers the things you need to successfully work with information containing cyrillic text (mostly Russian) under Linux. Although this document assumes your using Linux as an operating system, most of information presented is equally applicable to many other Unix flavors. I shall try to keep the distinction as visible as possible.
There are a number of popular Linux distributions. As an example system I describe the RedHat 4.1 Linux (Vanderbildt) - the one I am personally using. Nevertheless, I shall try to highlight the differences, if they exist, in other popular distributions, such as Debian GNU/Linux and Slackware Linux.
Since such setup directly modifies and extends the Operating System, you should understand, what you are doing. Even though I tried to keep things as easy as possible, having some experience with a given piece of software is an advantage. I am not going to describe what the X Window System is or how to typeset the documents with TeX and LaTeX, or how to install printer in Linux. Those issues are covered in other documents.
For the same reason, in most cases I describe a system-wide setup, by default requiring root privileges. Still, if there is a possibility for user-level setup, I'll try to mention it.
NOTE: The X Window System, TeX and other Linux components are complex systems with a sofisticated configuration. If you do something wrong, you can not only fail with Russian setup, but to break the component as well, if not the entire system. This is not to scare you off, but merely to make you understand the seriousness of the process and be careful. Preliminary backup of the config files is highly recommended. Having a guru around is also advantageous.
This document is available at sunsite.unc.edu or tsx-11.mit.edu as a part of the Linux Document Project. Also, it may be available at various FTP sites containing Linux. Moreover, it may be included as a part of Linux distribution.
If you have any suggestions or corrections regarding this document, please, don't hesitate to contact me as abel@bfr.co.il. Any new and useful information about Cyrillic support in various Unices is highly appreciated. Remember, it will help the others.
Many people helped me (and not only me) with valuable information and suggestions. Even more people contributed software to the public community. I am sorry if I forgot to mention somebody.
So, here they go:
This document is Copyright (C) 1995,1997 by Alexander L. Belikoff. It may be used and distributed under the usual Linux HOWTO terms described below.
The following is a Linux HOWTO copyright notice:
Unless otherwise stated, Linux HOWTO documents are copyrighted by their respective authors. Linux HOWTO documents may be reproduced and distributed in whole or in part, in any medium physical or electronic, as long as this copyright notice is retained on all copies. Commercial redistribution is allowed and encouraged; however, the author would like to be notified of any such distributions.
All translations, derivative works, or aggregate works incorporating any Linux HOWTO documents must be covered under this copyright notice. That is, you may not produce a derivative work from a HOWTO and impose additional restrictions on its distribution. Exceptions to these rules may be granted under certain conditions; please contact the Linux HOWTO coordinator at the address given below.
In short, we wish to promote dissemination of this information through as many channels as possible. However, we do wish to retain copyright on the HOWTO documents, and would like to be notified of any plans to redistribute the HOWTOs.
If you have questions, please contact Tim Bynum, the Linux HOWTO coordinator, at linux-howto@sunsite.unc.edu. You may finger this address for phone number and additional contact information.
Unix is a technology trademark of the X/Open Ltd.; MS-DOS, Windows, Windows 95, and Windows NT are trademarks of the Microsoft Corp.; The X Window System is a trademark of The X Consortium Inc. Other trademarks belong to the appropriate holders.
In order to understand and print characters of various languages, the system and software should be able to distinguish them from other characters. That is, each unique character must have a unique representation inside the operating system, or the particular software package. Such collection of all unique characters, that the system is able to represent at once, is called a codeset.
At the time of the most operating system's creation, nobody cared about software being multilingual. Therefore, the most popular codeset was (and actually is) an ASCII (American Standard Code for Information Interchange).
The standard ASCII (aka 7-bit ASCII) comprises 128 unique codes. Some of them ASCII defines as real printable characters, and some are so-called control characters, which had special meanings in the old communication protocols. Each element of the set is identified by an integer character code (0-127). The subset of printable characters represents those found on the typewriter's keyboard with some minor additions. Each character occupies 7 least significant bits of a byte, whereas the most significant one was used for control purposes (say, transmission control in old communication packages).
The 7-bit ASCII concept was extended by 8-bit ASCII (aka extended ASCII). In this codeset, the characters' codes' range is 0-255. The lower half (0-127) is pure ASCII, whereas the upper one contains 127 more characters. Since this codeset is backward compatible with the ASCII (character still occupies 8 bit, the codes correspond the old ASCII), this codeset gained wide popularity.
The 8-bit ASCII doesn't define the contents of the upper half of the codeset. Therefore the ISO organization took the responsibility of defining a family of standards known as ISO 8859-X family. It is a collection of 8-bit codesets, where the lower half of each codeset (characters with codes 0-127) matches the ASCII and the upper parts define characters for various languages. For example, the following codesets are defined:
8859-1 - Europe, Latin America (also known as Latin 1)
8859-2 - Eastern Europe
8859-5 - Cyrillic
8859-8 - Hebrew
In Latin 1, the upper half of the table defines various characters which are not part of the English alphabet, but are present in various european languages (german umlauts, french accentes etc).
Another popular extended ASCII implementation is so-called IBM codepage (named after some computer company, that developed this codeset for it's infamous personal computers). This one contains pseudo-graphic characters in the upper half.
Software, that doesn't make any assumptions about the 8-th bit of the ASCII data is called 8-bit clean. Some older programs, designed with 7-bit ASCII in mind are not 8-bit clean and may work incorrectly with your extended ASCII data. Most of packages, however, are able to deal with the extended ASCII by default, or require some very basic setup. NOTE: before posting the question "I did all setup right, but I cannot enter/view Cyrillic characters!", please consult the section shells for the notes on the program, you are using.
For information about making your software 8-bit clean, see section locale-programming .
Since on most systems character occupies 8 bits, there is no way to extend ASCII more and more. The way to implement new symbols in ASCII-based codesets is creation of other extended ASCII implementations. This is the way, the Cyrillic ASCII set is implemented.
We already mentioned ISO 8859-5 standard as the one defining the Cyrillic codeset. But as it often happens to the standards, this one was developed without taking into account the real practices in the former USSR. Therefore, one thing that standard really achieved was another degree of confusion. I wouldn't say that ISO 8859-5 is widely used anywhere.
Other standards for Cyrillic include the so-called Alt codeset and Microsoft CP1251 codepage. The former one was developed by (who?) for MS-DOS quite a while ago. Back then, there was not very buzz yet about internetworking, so the intention was to make it as compatible as possible with the IBM standard. Therefore the Alt codeset is effectively the same IBM codepage, where all specific European characters in the upper half were replaced with the Cyrillic ones, leaving the pseudographic ones. Therefore, it didn't screw the text windowing facilities and provided Cyrillic characters as well. The Alt standard is still alive and extremely popular in MS-DOS.
Microsoft CP1251 codepage is just an attempt of Microsoft to come up with the new standard for Cyrillic codeset in Windows. As far as I know, it is not compatible with anything else (not very surprizing, huh?)
And finally there is KOI8-R. This one is also quite old, but it was designed wisely and nowadays the design points of it look really useful.
Again, it is compatible with ASCII, and the Cyrillic characters are
located in the upper half. But the main design point of KOI8-R is
that the Cyrillic characters' positions must correspond to the English
characters with the same phonetics. Namely, if we set the eighth bit
of the English character 'a', we'll get the Cyrillic 'a'.
This means that, given the Cyrillic text written in KOI8-R, we can
strip the eighth bit of each character and we still get a readable
text, although written with English characters! This is very
important now, since there are many mailers on the Internet, that just
strip the eighth bit silently, being sure that every single soul on
the face of the Earth speaks English.
Not surprisingly, KOI8-R quickly became a de-facto standard for Cyrillic on the Internet. Andrew A. Chernov did a tremendous amount of work to make a standard in this area. He is an author of RFC 1489 ("Registration of a Cyrillic Character Set").
These two standards differ only in positions of the cyrillic characters in the table (that is in cyrillic character codes).
The principal difference is that the Alt codeset is used by MS-DOS users only, whereas KOI8-R is used in Unix, as well as in MS-DOS (though in the latter KOI8-R is much less popular). Since we are doing the right thing (namely working in the Unix operating system), we shall focuse mostly on KOI8-R.
As for the ISO standard, it is more popular in Europe and the US as a standard for Cyrillic. The leader in Russia is definitely KOI8-R.
There are other standards, which are different from ASCII and much more flexible. Unicode is most known. However, they are not implemented as good as the basic ones in Unix in general and Linux in particular. Therefore, I am not describing them here.
Before we start customizing various parts of the system functionality, we have to set up a couple basic things. Most of tools described below assume that there are Cyrillic fonts available and a user is able to input Cyrillic characters. To make it true we have to configure the environment to provide both fonts and input facility for Cyrillic.
There are effectively two interface models supported by Linux. One is the text mode, and the other one is the graphic mode, provided by the X Window System. Both require different setup, which will be described below.
Generally, the text mode setup is the easiest way to show and input Cyrillic characters. There is one significant complication, however: the text mode fonts and keyboard layout manipulations depend on terminal driver implementation. Therefore, there is no portable way to achieve the goal across different systems.
Right now, I describe the way to deal with the Linux console driver. Thus, if you have another system, don't expect it to work for you. Instead, consult your terminal driver manual. Nevertheless, send me any information you find, so I'll be able to include it in further versions of this document.
The Linux console driver is quite a flexible piece of software. It is capable of changing fonts as well as keyboard layouts. To achieve it, you'll need the kbd package. Both RedHat and Slackware install kbd as part of a system.
The kbd package contains keyboard control utilities as well as a big collection of fonts and keyboard layouts.
Cyrillic setup with kbd usually involves two things:
setfont program. The fonts files are located in
/usr/lib/kbd/consolefonts.
NOTE: Never run the setfont program under X because it will hang
your system. This is because it works with low-level video card calls
which X doesn't like.
loadkeys
program.
NOTE: In RedHat 3.0.3, /usr/bin/loadkeys has too restrictive
access permissions, namely 700 (rwx------). There are no reasons
for that, since everyone may compile his own copy and execute it (the
appropriate system calls are not root-only). Thus, just ask your
sysadmin to set more reasonable permissions for it (for example, 755).
The following is an excerpt from my cyrload script, which sets
up the Cyrillic mode for Linux console:
if [ notset.$DISPLAY != notset. ]; then
echo "`basename $0`: cannot run under X"
exit
fi
loadkeys /usr/lib/kbd/keytables/ru.map
setfont /usr/lib/kbd/consolefonts/Cyr_a8x16
mapscrn /usr/lib/kbd/consoletrans/koi2alt
echo -ne "\033(K" # the magic sequence
echo "Use the right Ctrl key to switch the mode..."
Let me explain it a bit. You load the appropriate keyboard mapping. Then you load a font corresponding to the Alt codeset. Then, in order to be able to display text in KOI8-R correctly, you load a screen translation table. What it does is a translation of some characters from the upper half of the codeset to the Alt encoding. The word 'some' is crucial here - not all characters get translated, therefore some of them, like IBM pseudographic characters get unmodified to the screen and display correctly, since they are compatible with the Alt codeset, as opposed to KOI8-R. To ensure this, run mc and pretend you are back to MS-DOS 3.3...
Finally, the magic sequence is important but I have no idea what on the Earth it does. I stole/borrowed/learned it from German HOWTO back in 1994, when it was like the only national language oriented HOWTO. If you have any idea about this magic sequence, please tell me.
Finally, for those purists, who don't wont to give the Alt codeset a chance, I'm attaching yet another version of the script above, using native KOI8-R fonts.
if [ notset.$DISPLAY != notset. ]; then
echo "`basename $0`: cannot run under X"
exit
fi
loadkeys /usr/lib/kbd/keytables/ru.map
setfont /usr/lib/kbd/consolefonts/koi-8x16
echo "Use the right Ctrl key to switch the mode..."
However, don't expect nice borders in your text mode-based windowing applications.
Now you probably want to test it. Do the appropriate bash or tcsh
setup, rerun it, then press the right Control key and make sure
you are getting the cyrillic characters right. The 'q' key must
produce russian "short i" character, 'w' generates
"ts", etc.
If you've screwed something up, the very best thing to do is to reset to the original (that is, US) settings. Execute the following commands:
loadkeys /usr/lib/kbd/keytables/defkeymap.map setfont /usr/lib/kbd/consolefonts/default8x16
NOTE: unfortunately enough, the console driver is not able to preserve it's state (at least easily enough), while running the X Window System. Therefore, after you leave the X (or switch from it to a console), you have to reload the console russian font.
I am not using FreeBSD so I couldn't test the following information. All data in this section should be treated as just pointers to begin with. The FreeBSD project homepage may have some information on the subject. Another good source is the relcom.fido.ru.unix newsgroup. Also, check the resources listed in section resources .
Anyway, this is what Ilya K. Orehov suggests to do in order to make FreeBSD console speak Russian:
/etc/sysconfig add:
keymap=ru.koi8-r keyrate=fast # NOTE: '^[' below is a single control character keychange="61 ^[[K" cursor=destructive scrnmap=koi8-r2cp866 font8x16=cp866b-8x16 font8x14=cp866-8x14 font8x8=cp866-8x8
/etc/csh.login:
setenv ENABLE_STARTUP_LOCALE setenv LANG ru_SU.KOI8-R setenv LESSCHARSET latin1
/etc/profile
Like the console mode, the X environment also requires some setup. This involves setting up the input mode and the X fonts. Both are being discussed below.
First of all, you have to obtain the fonts having the Cyrillic glyphs at the appropriate positions.
If you are using the most recent X (or XFree86) distribution, chances are, that you already have such fonts. In the late 1995, the X Window System incorporated a set of Cyrillic fonts, created by Cronyx. Ask your system administrator, or, if you are the one, check your system, namely:
xlsfonts | grep koi8'. If there are fonts listed, your
X server is already aware about the fonts.
find -name crox\*.pcf\*to find the location of the Cyrillic fonts in the system. You'll have to
enable those fonts to the X server, as I explain below.
If you haven't found such fonts installed, you'll have to do it yourself.
There is some ambiguity with the fonts. XFree86 docs claim that the
russian fonts collection included in the distribution is developed by
Cronyx. Nevertheless, you may find another set of Cronyx Cyrillic
fonts on the net (eg. on
ftp.kiae.su), known as the xrus package (don't confuse it
with the xrus program, which is used to setup a Cyrillic keyboard
layout. Hopefully, tha letter one was renamed to xruskb
recently). Xrus has fewer fonts than the collection in Xfree86
(38 vs 68), but the latter one didn't go along with my
Netscape setup - it gave me some really huge
font in the menubar. The xrus package doesn't have this problem.
I would suggest you to download and try both of them. Pick up the one which you'll like more. Also, I'm going to creat RPM packages soon for both collections and download them to ftp.redhat.com.
There are also older stuff, for example the vakufonts package, created by Serge Vakulenko, which was the base for the one in the X distribution. There are also a number of others. The important point is that the fonts' names in the old collection were not strictly conforming to the standard. The latter is fine in general, but sometimes it may cause various weird errors. For example, I had a bad experience with Maple V for Linux, which crashed mysteriously with the vakufonts package, but ran smoothly with the "standard" ones.
So, let's start with the fonts:
/usr/lib/X11/fonts/cyrillic for a system-wide setup, or just
create a private directory for personal use.
*.bdf files), you have to
compile them. For each font do:
bdftopcf -o <font>.pcf <font>.bdfIf your server supports compressed fonts, do it, using the compress program:
compress *.pcfAlso, if you do want to put the new fonts to an already existing font directory. you have to concatenate the old and the new files named
fonts.alias in the case both of them exist.
fonts.dir. You don't have to create this
list manually. Instead, do:
cd <new font directory> mkfontdir .
XF86Config. To find the location of this file, see output of
startx. Also, see XF86Config(4/5) for details.
xinit. Add the new directory to
the xinit startup file. See xinit(1x) and the next option
for details.
~/.xinitrc (or ~/.Xclients, or ~/.xsession
for the RedHat users). Add the following commands to it:xset +fp <new font directory> xset fp rehashIt is important to note that '
+fp' means that the new fonts will
be added to the head of the font path list. That is, if an application
requests say a fixed font, it'll be given the one with Cyrillic
characters, which is definitely what we are trying to achieve.
There are problems, though. The fixed font in the cyrillic fonts
distribution doesn't have it's bold and italic counterparts. My font
of choice is 6x13, so, since it also lacks bold and italic
typefaces, I cannot use Emacs/XEmacs faces in their full
glory. Hopefully somebody will ultimately create those fonts and the
situation will change.
In order to make the X clients use the Cyrillic fonts, you have to set
up the appropriate X resources. For example, I make the russian font
the default one in my ~/.Xdefaults:
*font: 6x13
Since my cyrillic fonts are first in the font path (see output of
'xset q'), the font above is taken from the "cyrillic" directory.
This just a simple case. If you want to set the appropriate part of the X client to a cyrillic font, you have to figure out the name of the resource (eg. using editres(1x)) and to specify it either in the resource database, or in the command line. Here go some examples:
$ xterm -font '-cronyx-*-bold-*-*-*-19-*-*-*-*-*-*-*'
...will run xterm with some ugly font; and
$ xfontsel -xrm '*quitButton.font: -*-times-*-*-*-*-13-*-*-*-*-*-koi8-*'
...will set a Cyrillic Times font for the Quit button in
xfontsel.
In the newest X releases (X11R61 and higher) there are two "standard"
input methods: the original one, working through the xmodmap
utility, and the new one called Xkb (X KeyBoard). The very first
thing you have to do is to disable the Xkb method! Don't get
charmed by it's ability to set up a "russian keyboard". It looks like
this method is using the Cyrillic keysyms defined in
keysymdef.h. This file defines keysyms for many languages. The
only problem is that those definitions have nothing to do with the
extended ASCII codeset - the one most programs are only able to
operate with! I hardly know any programs being able to grok the
keysymdef.h keysyms, different from 8-bit ASCII. However our goal
is to get the KOI8-R support to work.
To disable the Xkb support, browse through the Keyboard
section of your XF86Config file and comment all lines starting
with Xkb (case doesn't matter). Instead, put the following line:
XkbDisable
The xmodmap program.allows customization of codes emitted by
various characters and their combinations. It sets the things up based
on the file containing the translation table.
In the previous versions of this document I used to describe the
xmodmap-based setup in a great detail. This proved to be almost
useless. The Xmodmap-based input translation method is well known
as being it is non-portable, inflexible, and incomplete. Your
configuration may work with one XFree version and fail with a
different one. Even worse, sometimes things differ accross different
servers in the same distribution.
I strongly suggest you not to play with this xmodmap, at least
for now. Apart from headache and disappointment you'll gain nothing.
Instead, I recommend installing the
xruskb package,
which allows you to configure most of the input translation parameters
without having to know about xmodmap. Again, the RedHat Linux
users are free to download and install an
RPM package.
Three variables should be set on order to make bash understand the
8-bit characters. The best place is ~/.inputrc
file. The following should be set:
set meta-flag on set convert-meta off set output-meta on
The following should be set in .cshrc:
setenv LC_CTYPE iso_8859_5 stty pass8
If you don't have the POSIX stty (impossible for Linux), then
replace the last call to the following:
stty -istrip cs8
As for the public domain ksh implementation - pdksh 5.1.3,
you can input 8 bit characters only in vi input mode. Use:
set -o vi
So far, less doesn't support the KOI8-R character set, but the
following environment variable will do the job:
LESSCHARSET=latin1
To display Cyrillic text correctly, select the full 8 bits item in the Options/Display menu.
If your problem is the ugly windows' borders, consult the linux-console section.
As an off-topic, if you want to make mc use color in an
Xterm window, set the variable COLORTERM:
COLORTERM= ; export COLORTERM
Make sure that the shell on the destination site is properly set
up. Then, if your rlogin doesn't work by default, use 'rlogin
-8'.
Use the same way as with csh (see section
csh). The startup files in this case are .zshrc or
/etc/zshrc.
In this section I'll describe how to customize various text editors to work with Cyrillic text. This doesn't cover the word processors, which will be described later (see section <@@ref>word-processingword-processing ).
There are two version of the Emacs editor - GNU Emacs and XEmacs. While they provide more or less same functionality, some implementation details are significantly different. Cyrillic setup requires some low-level (in Emacs Lisp sense) tweaking, and it differs a bit for those two versions.
NOTE: Apart from the setup described here, there is an alternative way to configure both versions of emacs - use MULE (MULtilanguage Emacs support). The latter way is fairly complicated and (to the best of my knowledge) rarely used, so I don't discuss it here.
The minimal cyrillic support in GNU emacs (you don't have to do
it for the XEmacs) is done by adding the following calls to one's
.emacs (provided that the Cyrillic character set support is
installed for console or X respectively):
(standard-display-european t) (set-input-mode (car (current-input-mode)) (nth 1 (current-input-mode)) 0)
This allows the user to view and input documents in Russian.
However, it isn't enough. Emacs doesn't know yet, that Cyrililic characters may constitute a word, let alon the upper/lower case conversion rules. In order to teach Emacs doing that, you have to modify the syntax and case tables of emacs:
(require 'case-table)
(let* ((ruc "\341\342\367\347\344\345\263\366\372\351\352\353\354\355\356\357\360\362\363\364\365\346\350\343\376\373\375\370\371\377\374\340\361")
(rlc "\301\302\327\307\304\305\243\326\332\311\312\313\314\315\316\317\320\322\323\324\325\306\310\303\336\333\335\330\331\337\334\300\321")
(i 0)
(len (length ruc)))
(while (< i len)
(modify-syntax-entry (elt ruc i) "w ")
(modify-syntax-entry (elt rlc i) "w ")
(set-case-syntax-pair (elt ruc i) (elt rlc i) (standard-case-table))
(setq i (+ i 1))))
For this purpose I created a rusup.el file which does this, as
well as a couple handy functions. You have to load it in your
~/.emacs.
Finally, the
russian.el package by Valery Alexeev
(valery@math.uga.edu) allows the user to switch between cyrillic
and regular input mode and to translate the contents of a buffer from
one Cyrillic coding standard to another (which is especially useful
while reading the texts imported from MS-DOS or Windows).
The vi editor (at least it's clone vim, available in most Linux distributions) is aware of 8-bit characters. It will allow you to enter cyrillic characters and will be able to recognize the word boundaries correctly. I don't know about the upper-/lower-case conversion rules, since I don't use vi much. If you know something about it, please inform me.
Joe requires a special -asis option to recognize 8-bit
characters. You may either specify this option at the command line, or
to put it in ~/.joerc file (for personal use, or in
/usr/lib/joerc for system-wide setup.
If your program doesn't understand -asis option, you have to
upgrade to the newer version.
However, joe doesn't seem to understand the cyrillic words' boundaries correctly. I assume, that it applies both to the case conversion rules.
The program I use to spell-check text is the GNU ispell. It is very flexible and extensible, so it is possible to use it to spell-check text in languages, other than English, by adding new spell dictionaries.
Constantine Knizhnik has created a very good Russian dictionary for ispell. You may find it at his homepage. The distribution includes a handy incremental spelling script for emacs.
Ideally, if you already have an ispell properly installed, you
have to just step into the newly-created directory and generate the
dictionary, using the commands provided in the Makefile. However,
chances are quite high, that you'll see a lot of complaints about the
ispell's unawareness of the 8-bit data. This is because in most
distributions, ispell is compiled without 8-bit data support. In
this case, you cannot avoid recompiling the ispell package.
Again, RedHat users will be delighted to know that I've rebuilt the ispell package with both Russian and German dictionaries. As usual, you may grab it from the RedHat FTP site.
Once you have everything installed, you may invoke Russian
spell-check, by supplying '-d russian' option to ispell.
Now, if you use Emacs, you may want to add a menu item for a
russian dictionary. I sent a proposed menu entry to the ispell.el
maintainer and he kindly agreed to include it in the the next public
release of the file. Meanwhile, you may do it by adding the following
code in your ~/.emacs (or in
/usr/share/emacs/site-lisp/site-start.el for a system-wide
setup):
(setq ispell-dictionary-alist
(append ispell-dictionary-alist
'(("russian"
"[\341\342\367\347\344\345\263\366\372\351\352\353\354\355\356\357\360\362\363\364\365\346\350\343\376\373\375\370\371\377\374\340\361\301\302\327\307\304\305\243\326\332\311\312\313\314\315\316\317\320\322\323\324\325\306\310\303\336\333\335\330\331\337\334\300\321]"
"[^\341\342\367\347\344\345\263\366\372\351\352\353\354\355\356\357\360\362\363\364\365\346\350\343\376\373\375\370\371\377\374\340\361\301\302\327\307\304\305\243\326\332\311\312\313\314\315\316\317\320\322\323\324\325\306\310\303\336\333\335\330\331\337\334\300\321]"
"[']" t ("-C" "-d" "russian") "~latin1"))))
(define-key-after ispell-menu-map [ispell-select-russian]
'("Select Russian (KOI-8)" . (lambda ()
(interactive)
(ispell-change-dictionary "russian")))
'british)
Unfortunately, it won't work for the XEmacs. I'll try to solve this problem later.
Setting up your mail and news software to recognize Cyrillic text is not very difficult, although you have to possess some knowledge of principles, mail and news work by.
Internet electronic mail software generally consists of two parts: MUA (Mail User Agent) and MTA (Mail Transfer Agent). MUA is the program you use to read, compose, and send mail. However, MUA doesn't transfer mail messages by itself. Instead, it calls the MTA, which is reponsible to send message using an appropriate protocol to the appropriate direction. For example, your MUA may be Pine and MTA - qmail.
Until quite recently, both MTA and MUA weren't 8-bit clean by default. Therefore, whenever you sent your message from say America to Russia, you were never sure, that some intermediate MTA won't strip the 8th bit from each character of your message. Therefore, a set of protocols was developed, which allowed encoding various kinds of data using only printable characters from 7-bit ASCII. This family of protocols is called MIME (MultimedIa Mail Encoding).
Since MIME is usually pre-configured to reasonable defaults, we won't describe it here. We will talk more about MIME when we provide a backward compatibility with other Cyrillic encodings (section mime ).
Meanwhile, we start MUA setup, because it is usually up to an end-user. Then, we will describe the basic priciples of the MTA configuration for Cyrillic.
Basically, you don't need any special setup for Emacs-based readers, geivedn, that you've already configured the emacs itself (see section emacs ).
Set the following directive in ~/.pinerc for personal
configuration, or in /usr/lib/pine.conf for a global one:
character-set=ISO-8859-5
There are a number of MTAs available now. These include sendmail, qmail, smail, exim, and others.
So far, sendmail is much more popular than other MTAs, because
it's long history and widespread use. Personally, I hate this program
- it is a perfect example of a completely moronic design and even it's
"improvements" with the passion of time show, that this approach is
not going to cease. Any system administrator shudders, when he hears
the ominous "sendmail.cf" name...
As of now, sendmail doesn't strip the 8th bit anymore. However, it may encode the 8-bit data using a special base64 encoding. Although most MUAs are supposed to recognize it and decode it back to a regular data, you may want to start with sending raw 8-bit text to make sure everything works.
As of version 8, sendmail handles 8-bit data correctly by
default. If it doesn't do it for you, check the EightBitMode
option and option 7 given to mailers in your
/etc/sendmail.cf. See "Sendmail. Operation and
Installation Guide" for details.
I don't know much about other MTAs. If you know something, which may be important for Cyrillic setup, please inform me.
Unlike e-mail and news, there is no definitive standard for Cyrillic encoding for the Web. This is primarily because Microsoft offers Web authoring tools, which only allow cp1251 codeset for Cyrillic, completely ignoring the fact that any other standards may already exist.
The setup described here is very basic. It will allow you to view pages in the KOI8-R codeset. If the situation improves, I'll add more information.
As of version 2.6, you may select the appropriate encoding for the
display Character set option.
Make sure you are using Netscape version higher than 3. If your
Netscape is older, download a new one from
www.netscape.com.
To be able to see Cyrillic text in most parts of the HTML document, do the following:
NOTE: This setup will work with most parts of the document. However, you won't be able to display Cyrillic text in the window header, menus and some controls. Attempts to fix it follows.
To fix this, it is usually enough to:
Netscape.ad)
to ~/Netscape.
*documentFonts.charset*iso8859-1: koi8-r
This will force all frame and input elements to use the fonts with koi8-r encoding instead of the default ones, therefore you have to make sure you have installed such fonts (see section xfonts ).
The bad news about the trick above is that if you load a document
which is supposed to be displayed in iso-8859-1 fonts, it will be
displayed using the koi8 fonts instead. Sometimes such documents
will look worse.
Andrew A. Chernov is the one, who knows more than others about KOI-8 in general and netscape in particular. Visit his excellent KOI-8 page and download a patch for Netscape resource file, making Netscape speak Russian as much as it is able to.
In this section I'll describe several ways to make TeX and LaTeX
typeset Cyrillic texts. There are several ways, which differ in setup
sophistication and usage convenience. For example, one possibility is
to start without any preliminary setup and use the Washington
AMSTeX Cyrillic fonts. On the other hand, you may install a LaTeX
package, providing a very high degree of Cyrillic setup. I have an
experience with two such packages. One is the cmcyralt package by
Vadim V. Zhytnikov (vvzhy@phy.ncu.edu.tw) and Alexander Harin
(harin@lourie.und.ac.za), and the other one is the LH
package by the CyrTUG group with styles and hyphenation for
LaTeX2e by Sergei O. Naoumov (serge@astro.unc.edu). I'll describe
both.
Note, that there are two versions of LaTeX available - 2.09 is the old one, while 2e is a new pre-3.0 release. If you are using LaTeX 2.09, then switch quickly to the 2e. The latter retains compatibility with the old one, but has much more features. Hopefully, version 3 will be released soon. I describe a LaTeX 2e setup.
Also, both of these packages require the Cyrillic text to be typeset
using the Alt codeset, not KOI8-R! This is caused by
historical reasons, since the creators of these packages used to work
with EmTeX - the MS-DOG version of TeX (they didn't know about
Linux yet :-). Switching to the KOI8-R requires some effort and is
being expected to be done soon. So far, use some utility to convert
your russian text from KOI8-R to Alt. See section
<@@ref>user-toolsuser-tools
.
This package was created for the American Mathematic Society to
provide documents with Russian references. Therefore, the authors were
not very careful and the fonts look quite clumsy. This package is
usually referred to as a "really bad cyrillic package for TeX".
Nevertheless, we'll discuss it, because it is very easy to use and doesn't require any setup - this collection is supplied with most of TeX distributions.
Of course, you won't be able to use such luxury as automatic hyphenation, but anyway...
1. Prepend your document with the following directives:
\input cyracc.def
\font\tencyr=wncyr10
\def\cyr{\tencyr\cyracc}
2. Now to type a cyrillic letter, you enter
\cyr
and use a corresponding latin letter or a TeX command. Thus, the lower case of the Russian alphabet is expressed by the following codes:
a b v g d e \"e zh z i {\u i} k l m n o p r s t u f kh c ch sh shch
{\cprime} y {\cdprime} \`e yu ya
It is extremely inconvenient to convert your Russian texts to such encoding, but you can automate the process. The translit program (section <@@ref>user-toolsuser-tools ) supports a TeX output option.
There is some new teTeX-rus package. It is reported to support KOI-8 character set and have all basic stuff required for TeX and LaTeX. I personally haven't tried it yes, although I heard about it's successfull usage.
NOTE: This package requires you to reconfigure and rebuild some parts of your teTeX package (for example the precompiled LaTeX macros). Unless you know what you are doing, you shouldn't try it without necessary care. Otherwise, you may be better off by borrowing the precompiled parts fron somebody on the net
The cmcyralt package can be found on any CTAN (Comprehensive TeX
Archive Network) site like ftp.dante.de. You should obtain two
pieces: the fonts collection from fonts/cmcyralt and the
styles and hyphenation rules from
macros/latex/contrib/others/cmcyralt.
Note: Make sure you have the Sauter package installed, since
cmcyralt requires some fonts from it. You can get this package
from CTAN site as well.
Now you should do the following:
cmcyralt directory in the
/usr/lib/texmf/fonts/cm/. Create the src, tfm, and
vf subdirectories in it. Put there .mf, .tfm, and
vf files respectively.*.fd) from the styles archive to the
appropriate place (in my case it was
/usr/lib/texmf/tex/latex/fd).*.sty) to the appropriate LaTeX styles
directory (in my case /usr/lib/texmf/tex/latex/sty).Now the hyphenation setup. This requires to remake the LaTeX base file.
hyphen.cfg contains the directives for both
English and Russian hyphenation. Extract the one for Russian and place
it to the LaTeX hyphenation config file lthyphen.ltx. In my case,
that file was in /usr/lib/texmf/tex/latex/latex-base.
rhyphen.tex to the same directory. It is needed for
making the new base file. Later, you can remove it.
make' in that directory. Don't for get to make a link
from Makefile to Makefile.unx. During the make process check
the output. There should be a message:
Loading hyphenation patterns for Russian.If everything goes OK, you will get the new
latex.fmt in that
directory. Put it to the appropriate place, where the previous one was
(like /usr/lib/texmf/ini/). Don't forget to save the
previous one!.This is it. The installation is complete. Try processing the examples found in the styles archive. If you are to create the PostScript files without any problems, then everything is OK. Now, to use Cyrillic in LaTeX, prepend your document with the following directive:
\usepackage{cmcyralt}
For more details, see the README file in the cmcyralt styles
archive.
Note: if you do have problems with the examples, provided you
have installed the things right, then probably your TeX system hasn't
been installed correctly. For example, during my first try, every
attempt to create the .pk files for the russian fonts failed
(MakeTeXPK stage). A substantial investigation discovered some
implicit conflict between the localfont and ljfour
METAFONT configurations. It used to work before, but kept
crashing after the cmcyralt installation. Contact your local TeX
guru - TeX is very (sometimes too much) complicated to reconfigure it
without any prior knowledge.
You can obtain the CyrTUG package from the
SunSite archive. Get the files CyrTUGfonts.tar.gz,
CyrTUGmacro.tar.gz, and hyphen.tar.Z.
The process of installation doesn't differ from too much the previous one.
Youri Kovalenko ( http://www.inp.nsk.su/~kovalenko) has compiled a concise summary on StarOffice russification. It is located at ftp://sky.inp.nsk.su/archives_src/linux/StarOffice/russification.txt. I never had a chance to try it, so I cannot say anything about it's correctness.
Another source of information on the subject is compiled by Eugene Demidov ( mailto:jack@gpi.ru) and is located at ftp://ftp.kapella.gpi.ru/pub/cyrillic/psfonts/README.
Sometimes you have just a plain ASCII KOI8-R text and you want to print it just to get it on the paper. One of the easiest ways to achieve that is to use special programs converting text to PostScript.
There are a number of programs doing such conversion. I personally prefer a2ps. Originally developed as a simple text-to-PostScript converter it became a big and highly configurable program with many options and allows you to manage various page layouts, syntax highlighting etc. Another tool (now available as a part of the GNU project) is enscript.
A text to PostScript converter has been around for a while and is one of the most versatile printing tools. The author proved to be very open to suggestions, so since the release 4.9.8 a2ps supports Cyrillic right off-the-shelf. All you need is a PostScript printer.
The command I use is:
a2ps -X koi8r --print-anyway <file>
The GNU enscript program is also designed for converting text to PostScript and it also has a non-ASCII codeset support. It doesn't have Cyrillic PostScript fonts, but it is very easy to get them, as will be explained below (thanks to Michael Van Canneyt):
textbook.tar.gz from
the Cyrillic Software collection on
sunsite.unc.edu. Extract it to a directory, where
enscript fonts are located (usually
/usr/share/enscript). Now change to that directory and run
the following command:
mkafmmap *.afm
enscript --font=Textbook8 --encoding=koi8 some.file
If you want a really quick and dirty solution and you don't care about the output quality and all you need is just Cyrillic on the paper, try the rtxt2ps package. It is a very simple no-frills text-to-PostScript conversion program. The output quality is not very good (or, to be honest, just bad) but it does it's job.
If all you need is just to print an ASCII text without any additional word processing, you may try to use some programs, which would convert your Cyrillic text to a ready-to-process TeX file. One of the best programs for such purposes is translit (see section conversion ). In this case, you don't even have to bother about installing the Cyrillic fonts for TeX, since translit uses a Washington Cyrillic package, which is included in most TeX distributions (or am I wrong?)
Experts say PostScript is easy. I cannot judge - I've got too many things to learn to spare some time to learn PostScript. So I'll try to use my sad experience with it. I'll appreciate any feedback from you guys who know more on the subject than I do (approx. 99% of the Earth population).
Basically, in order to print a Cyrillic text using PostScript, you have to make sure about the following things:
There is no solution general enough to be recommended as an ultimate treatment. I'll try to outline various ways to cope with different problems related to the subject.
One way to address Cyrillic setup problems generally enough is to use Ghostscript. Ghostscript (or just gs in the newspeak) is a free (well quasi-free) PostScript interpreter. It has many advantages; among them:
What is important in our particular case, is that once Ghostscript is set up, we can do all printing through it, thus eliminating extra setup for other PostScript devices (for example HP LaserJet IV)
This is important, since you probably don't want to put a responsibility to other programs to insert Cyrillic fonts in the PostScript output. Instead, you add them to gs and just make the programs generate Cyrillic output compatible with the fonts.
To add a new font (in pfa or pfb form) in gs, you have
to:
/usr/lib/ghostscript/fonts).
Fontmap file in the gs directory.
Recently a decent set of Cyrillic fonts for GhostScript appeared.
It is located in
ftp.kapella.gpi.ru. This one even has a necessary part to add
to the Fontmap file. You have to download the contents of the
/pub/cyrillic/psfonts directory. The README file
describes the necessary details.
Printing is always tricky. There are different printers from different vendors with different facilities. Even for a native printing there is no uniform solution (this applies not only to UNIX, but to other operating systems as well.
Printers have different control languages and often they have very different views on foreign language support. The good news is that on control language seems to be recognized as a de-facto standard for print job description - it is a PostScript language developed by Adobe Corporation.
Another problem is a variety of requirements to the print services. For example, sometimes you want just to print a piece if C program, containing comments in Russian, so you don't need any pretty-printing - just a raw ASCII output in a single font. Another time, when you design a postcard for your girlfriend, you'll probably need to typeset some document with different fonts etc. This will definitely require more effort to setup Cyrillic support.
To accomplish the former task you just have to make your printer understand one Cyrillic font and (maybe) install some filter program to generate data in appropriate format. To accomplish the latter one, you have to teach your printer different fonts and have a special software.
There is also something in the middle, when you get a program which knows how to generate both the fonts and the appropriate printer input, so you can say do some aource code pretty-printing without sophisticated word processing systems.
All these options will be more or less covered below.
If you have a good old dot matrix printer and all you need is to print a raw KOI8-R text, try the following:
rc file at a boot
time.
Thus, having Cyrillic characters in the upper part of the printer's character set will allow you to print you texts in Russian without any hussle.
Alternatively to the KOI8-R fonts you may try to use the Alt font. There are two reasons for that:
However in this case, you'll have to convert your texts from
KOI8-R to Alt before sending them to a printer. This is quite
easy, since there are a lot of programs doing that (see
<@@ref>user-toolstranslit for example), so you just have to
call such program properly in the if field in
/etc/printcap file. For example, with the translit
program you may specify:
if=/usr/bin/translit -t koi8-alt.rus
See printcap(5) for details.
One great way to cope with different printers and fonts is to use TeX (see section tex ). TeX drivers handle all details, so once you make TeX understand Cyrillic fonts, you are done.
Another possibility is to use PostScript. I decided to devote an entire chapter postscript to the subject, since it is not simple.
Finally, there are other word processors, which have printer drivers. I never tried anything apart from TeX, so I cannot suggest anything.
So far, I described how to make various programs understand Cyrillic text. Basically, each program required it's own method, very different from the others. Moreover, some programs had incomplete support of languages other than English. Not to mention their inability to interact using user's mother tongue instead of English.
The problems outlined above are very pressing, since software is rarely developed for home market only. Therefore, rewriting substantial parts of software each time the new international market is approached is very ineffective; and making each program implement it's own proprietary solution for handling different languages is not a great idea in a long term either.
Therefore, a need for standardization arises. And the standard shows up.
Everything related to the problems above is divided by two basic concepts: localization and internationalization. By localization we mean making programs able to handle different language conventions for different countries. Let me give an example. The way date is printed in the United States is MM/DD/YY. In Russia however, the most popular format is DD.MM.YY. Another issues include time representation, printing numbers and currency representation format. Apart from it, one of the most important aspect of localization is defining the appropriate character classes, that is, defining which characters in the character set are language units (letters) and how they are ordered. On the other hand, localization doesn't deal with fonts.
Internationalization (or i18n for brevity) is supposed to solve the problems related to the ability of the program interact with the user in his native language.
Both of the concepts above had to be implemented in a standard, giving programmers a consistent way of making the programs aware of national environments.
Althogh the standard hasn't been finished yet, many parts actually have; so they can be used without much of a problem.
I am going to outline the general scheme of making the programs use the features above in a standard way. Since this deserves a separate document, I'll just try to give a very basic description and pointers to more thorough sources.
One of the main concept of the localization is a locale. By locale is meant a set of conventions specific to a certain language in a certain country. It is usually wrong to say that locale is just country-specific. For example, in Canada two locales can be defined - Canada/English language and Canada/French language. Moreover, Canada/English is not equivalent to UK/English or US/English, just as Canada/French is not equivalent to France/French or Switzerland/French.
Each locale is a special database, defining at least the following rules:
In RedHat 4.1, which I am using there are actually two locale
databases: one for the C library (libc) and one for the X
libraries. In the ideal case there should be only one locale database
for everything.
To change your default locale, it is usually enough to set the
LANG environment variable. For example, in sh:
LANG=ru_RU export LANG
Sometimes, you may want to change only one aspect of the locale
without affecting the others. For example, you may decide (God knows
why) to stick with ru_RU locale, but print numbers according to
the standard POSIX one. For such cases, there is a set of environment
variables, which you can you to configure specific parts for the
current locale. In the last exaple it would be:
LANG=ru_RU LC_NUMERIC=POSIX export LANG LC_NUMERIC
For the full description of those variables, see locale(7).
Now let's be more Linux-specific. Unfortunately, Linux libc
version 5.3.12, supplied with RedHat 4.1, doesn't have a russian
locale. In this case one must be downloaded from the Internet (I don't
know the exact address, however).
To check, locale for which languages you have, run 'locale
-a'. It will list all locale databases, available to libc.
Fortunately, Linux community is rapidly moving to the new GNU libc
(glibc version 2, which is much more POSIX-compliant and has a
proper russian locale. Next "stable" RedHat system will already use
glibc.
As for the X libraries, they have their own locale database. In
the version I am using (XFree86 3.3), there already is a russian
locale database. I am not sure about the previous versions. In any
case, you may check it by looking into usr/lib/X11/locale/ (on
most systems). In my case, there already are subdirectories named
koi8-r and even iso8859-5.
With locale, program don't have to implement explicitly various character conversion and comparison rules, described above. Instead, they use special API which make use of the rules defined by locale. Also, it is not necessary for program to use the same locale for all rules - it is possible to handle different rules using different locales (although such technique should be strongly discouraged).
From the setlocale(3) manual page:
A program may be made portable to all locales by callingsetlocale(LC_ALL, "" )after program initialization, by using the values returned from alocaleconv()call for locale - dependent information and by usingstrcoll()orstrxfrm()to compare strings.
SunSoft, for example, defines 5 levels of program localization:
setlocale(), it doesn't make any assumptions about the 8th bit of
each character, it users functions from ctype.h and limits from
limits.h, and it takes care about signed/unsigned
issues.
It is very important not to do any assumption about the character
set nature and ordering. The following programming practices must be
avoided:
if (c >= 'A' && c <= 'Z') {
...
Instead, macros from the ctype.h header file are locale-aware and
should be used in all such occasions.
strcoll() and strxfrm() instead of strcmp() for
strings, it uses time(), localtime(), and strftime()/ for
time services, and finally, it uses localeconv() for a proper
numbers and currency representation.
gettext() (Sun/POSIX standard), or catgets() (X/Open
standard). For more information on that see section
i18n
.
char type. Instead it uses wchar_t, which defines entities
big enough to contain Unicode characters. ANSI C defines this data
type and an appropriate API.
For a more detaled explanation of locale, see, for example ( Voropay1 ) or ( SingleUnix ).
While localization describes, how to adapt a program to a foreign environment, internationalization (or i18n for brevity) details the ways to make program communicate with a non-English speaking user.
Before, that was done by developing some abstraction of the messages to output from the program's code. Now, such mechanism is (more or less) standardized. And, of course, there are free implementations of it!
The GNU project has finally adopted the way of making the
internationalized applications. Ulrich Drepper
(drepper@ipd.info.uni-karlsruhe.de) developed a package
gettext. This package is available at all GNU sites like
prep.ai.mit.edu. It
allows you to develop programs in the way that you can easily make
them support more languages. I don't intend to describe the
programming techniques, especially because the gettext package is
delivered with excellent manual.
Request for collaboration: If you want to learn the gettext
package and to contribute to the GNU project simultaneously; or even
if you just want to contribute, then you can do it! GNU goes
international, so all the utilities are being made locale-aware. The
problem is to translate the messages from English to Russian (and
other languages if you'd like). Basically, what one has to do is to
get the special .po file consisting of the English messages for a
certain utility and to append each message with it's equivalent in
Russian. Ultimately, this will make the system speak Russian if the
user wants it to! For more details and further directions contact
Ulrich Drepper (
drepper@ipd.info.uni-karlsruhe.de).
Being standard is not the only issue. To be really nice, one has to provide the backward compatibility. In our case, this means that the configuration should be tolerant to the data created using non-standard character sets - that is the Alt (cp866) and cp1251 ones. Also, we should be able to run Cyrillic programs for MS-DOS.
In most cases (except for HTTP), it is enough to provide a timely conversion of data to KOI8-R. When we talk about raw unstructured data, it is quite trivial - see section <@@ref>user-toolsConversion Utilities.
Another issue is the structured data. This case is more tricky. I'll try to outline the basic roadmap of fixing it.
MIME is a standard for architecture-independent data
representation. Originally developed for mail messages, it has now
many more applications. MIME defines format, which is open to
extensions and allows architecture-specific handling of data. For
example, if I receive a mail message, containing a MIME object of
the video/mpeg type (an encoded MPEG file), my mail reader
will automatically decode it and start an MPEG player.
Most UNIX programs, offering MIME capabilities, are based on the
metamail package, which contains a set of utilities and data
files to work with MIME objects. Several configuration files
(/etc/mailcap for global usage and ~/.mailcap for
personal setup) define rules for handling MIME object of various
types.
Thus, if you receive a proper MIME data stream, containing text in one of the obsolete character sets, you may define a MIME rule to convert such text to KOI8.
Below a number of MIME rules are shown, which are supposed to handle plain text and richtext objects, using both of the obsolete codesets, discussed above. You may incorporate these rules into one of the MIME configuration files.
Note, that these rules use the translit package to perform the actual conversion. For more information on that program and the conversion in general see section <@@ref>user-toolsConversion Utilities.
text/plain; translit -t cp1251-koi8.rus < %s; test=test \
"`echo %{charset} | tr '[A-Z]' '[a-z]'`" = cp1251; copiousoutput
text/richtext; translit -t cp1251-koi8.rus < %s; test=test \
"`echo %{charset} | tr '[A-Z]' '[a-z]'`" = cp1251; copiousoutput
text/plain; translit -t alt-koi8.rus < %s; test=test \
"`echo %{charset} | tr '[A-Z]' '[a-z]'`" = cp866; copiousoutput
text/richtext; translit -t alt-koi8.rus < %s; test=test \
"`echo %{charset} | tr '[A-Z]' '[a-z]'`" = cp866; copiousoutput
text/plain; translit -t alt-koi8.rus < %s; test=test \
"`echo %{charset} | tr '[A-Z]' '[a-z]'`" = alt; copiousoutput
text/richtext; translit -t alt-koi8.rus < %s; test=test \
"`echo %{charset} | tr '[A-Z]' '[a-z]'`" = alt; copiousoutput
Obviously enough, this will work for plain text data only. Binary files are supposed to handle the codeset issues themselves (at least their "parent" applications are). Therefore, if you receive a Microsoft Word document in the cp1251 character set, the duty of providing appropriate conversion capabilities lays upon an application you use to read that document (for example Microsoft Word, or Applix Words).
Unfortunately, the real situation is not that ideal. Many application have their own idea on how to use MIME. Until recently Microsoft Mail software had a broken MIME engine. Also, the Netscape Navigator/Communicator mail client is notorious because of it's sending of mail messages, encoded in cp1251 with the charset=koi8-r field in the message header and vice versa.
There are a lot of conversion routines for Cyrillic on the Internet. Each of them has it's own quirks and it's own degree of Cyrillic support.
In my opinion tools must be standard. In this particular case the "standard" conversion tool is GNU recode. Unfortunately, the version, found on the official GNU site (3.4) doesn't support Cyrillic yet (only ISO-8859-5). I developed a set of conversion tables for KOI8-R, Alt, and cp1251 for recode and submitted them to the recode maintainer. He promised to provide Cyrillic support in the upcoming release. Once it happens, I'll rewrite this section to recommend GNU recode as the standard conversion engine for Cyrillic.
Meanwhile, I would recommend a translit package. It supports many popular codesets and is even able to produce a *TeX files (see section tex ) from text in Russian. Also, RedHat users will enjoy an RPM package for translit.
For other conversion routines, Look at
SovInformBureau or
ftp.funet.fi. You can even use the special mode for emacs
(see section
Emacs).
This seems to be the only application, which may require Alt
Cyrillic character set. The reason is that Alt is native to DOS
and most of DOS programs dealing with Cyrillic are Alt-oriented.
For the console version (dos) you just have to load a keyboard
and screen driver. Most of DOS drivers will work fine. I personally
use the rk driver by A. Strakhov, which works for both console
and X versions of dosemu. Another choice is the r driver by
V. Kurland (sorry for possible misspelling). It is perfectly
customizable and supports many codesets, Alt and KOI8 among
them. However it won't work for the X window (at least version 1.14
I'm using).
Both drivers can be found on most Russian Internet sites, for example Kurchatov Institute FTP server.
For the X version of dosemu you have to provide an appropriate
X font as well. Alex Bogdanov sent me such font by e-mail. It is an
original vga font from the dosemu distribution, modified for
the Alt codeset. Unfortunately I don't know who is the creator of
this font and where the official site is.
To setup the font for dosemu you should
dosemu. If the font just replaces the
original vga font, then it will be recognized by
default. Otherwise, you have to describe it in
/etc/dosemu.conf:
# Font to use (without filename extensions). For example:
X { updatefreq 8 title "MS DOS" icon_name "xdos" font "vga-alt"}
Finally, you have to load a keyboard driver. Note, the you don't need
a screen driver for the X window. Therefore, not all drivers will
work. At least two will: rk by A. Strakhov, and cyrkeyb by
Pete Kvitek.
Collection of Cyrillic resources
Cronyx - the creators of Cyrillic fonts for the X Window System.
Cyrillic fonts for Ghostscript and StarOffice
relcom.fido.ru.linux newsgoup.
relcom.fido.ru.unix newsgoup.
Russian dictionary for GNU ispell
The russian.el package for emacs