Документ взят из кэша поисковой машины. Адрес оригинального документа : http://itpm.msu.su/LDP/nag/node47.html
Дата изменения: Sun Apr 18 13:36:36 1999
Дата индексирования: Mon Oct 1 20:15:14 2012
Кодировка:
Ethernet Installation contents
Next: Ethernet Cabling Up: Configuring the Networking Hardware Previous: A Tour of Network

Ethernet Installation

The current network code supports various brands of Ethernet cards. Most drivers were written by Donald Becker (becker@cesdis.gsfc.nasa.gov), who authored a family of drivers for cards based on the National Semiconductor-8390 chip; these have become known as the Becker Series Drivers. There are also drivers for a couple of products from D-Link, among them the D-Link pocket adaptor that allows you to access an Ethernet through a parallel port. The driver for this was written by Bjørn Ekwall (bj0rn@blox.se). The DEPCA driver was written by David C.-Davies (davies@wanton.lkg.dec.com).




Andrew Anderson
Thu Mar 7 23:22:06 EST 1996