Документ взят из кэша поисковой машины. Адрес оригинального документа : http://itpm.msu.su/LDP/nag/node102.html
Дата изменения: Sun Apr 18 13:36:17 1999
Дата индексирования: Mon Oct 1 20:26:53 2012
Кодировка:

Variable Names

dip only understands a predefined set of variables. A variable name always begins with a dollar symbol and must be written in lower-case letters.

The $local and $locip variables contain the local host's name and IP-address. Setting the hostname makes dip store the canonical hostname in $local, at the same time assigning $locip the corresponding IP-address. The analogous thing happens when setting the $locip.

The $remote and $rmtip variables do the same for the remote host's name and address. $mtu contains the MTU value for the connection.

These five variables are the only ones that may be assigned values directly using the get command. A host of other variables can only be set through corresponding commands, but may be used print statements; these are $modem, $port, and $speed.

$errlvl is the variable through which you can access the result of the last command executed. An error level of 0 indicates success, while a non-zero value denotes an error.