Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://comet.sai.msu.ru/UNIXhelp/scrpt/scrpt2.9.html
Дата изменения: Fri Jan 17 12:43:20 1997 Дата индексирования: Tue Oct 2 00:00:50 2012 Кодировка: |
Shell procedures may use the trap command to catch or ignore Unix operating system signals. The form of the trap command is:
trap 'command-list' signal-list
Several traps may be in effect at the same time. If multiple signals are received simultaneously, they are serviced in ascending order.
To check what traps are currently set use the trap command. For example:
trap