... Given an image covering some part of the sky, and a list of sky positions, it can be useful to know the value of the image at each of the positions in the list. The image might be a sensitivity or an exposure map for example: one might want to translate this into sensitivity or exposure at each of the positions. ... At present, the list of positions (which must be a binary table extension in a FITS file) must contain columns which give the position in image pixel coordinates. ...

... The file names' construction . The flight (m) stage's file set . ... the orbital data used for the flight operation monthly (m) long-term planning, . ... The orbital calculations are based on the initial orbital data determined by KIAM RAN using the orbital radio measurements treatment.The determined initial orbital data are presented as a state vector (satellite position and velocity) in the J2000 reference. ... Accept the file with extension '.bgr', where the Moscow time (MT=UT+3h) is used. ...

... In the above example, the second region uses the global coordinate system (PHYSICAL by default). ... Supported systems include: name description ---- ----------- PHYSICAL pixel coords of original file using LTM/LTV IMAGE pixel coords of current file FK4, B1950 sky coordinate systems FK5, J2000 sky coordinate systems GALACTIC sky coordinate systems ECLIPTIC sky coordinate systems ICRS currently same as J2000 LINEAR linear wcs as defined in file In addition, two mosaic coordinate ...

This diagram illustrates the effects of absolutely positioning a box with respect to the initial containing block. ... Most of the "inner" box contents are therefore rendered outside the document window. ... The text that is to the left of the line numbers lies outside the initial containing block. The lines, as they appear in the image, contain approximately: 1 Beginning of body contents. Start 2 of outer contents. End of outer 3 contents. End of body contents. ...

polimodel -- Produce model linear polarization and position angle images . ... Whether to apply random errors to output polarization and position angle values. seed = "" [integer] . ... This task produces a model linear polarization image and corresponding position angle image from an input image assumed to represent intensity (Stokes I parameter). ... A threshold for the input image can be defined such that polarization and position angle are not computed for input values less than this threshold. ...

polimodel -- Produce model linear polarization and position angle images . ... Whether to apply random errors to output polarization and position angle values. seed = "" [integer] . ... This task produces a model linear polarization image and corresponding position angle image from an input image assumed to represent intensity (Stokes I parameter). ... A threshold for the input image can be defined such that polarization and position angle are not computed for input values less than this threshold. ...

... 173Wall Peacock We catalogue the brightest extragalactic radio sources at 2.7 GHz. ... These data were originally presented in Wall and Peacock, MNRAS, 216, 173. The values in parenthesis include (units, datatype, example). 1 iauname Name of source in IAU convention (char7, example: '0320-37') . ... 3 ra_1950 rad Right ascension of source in radians (B1950) (real, example: 0.876068) . ... 9 alpha Spectral index of source between 2.7 and 5 GHz (real, example: 0.52) . ... Longair, 1975 . ...

Table 3.1: Designations of Special Targets . Table 3.2: Target Categories . Table 3.3: Descriptive Keywords for STAR and EXT-STAR . Table 3.4: Descriptive Keywords for STELLAR CLUSTER and EXT-CLUSTER . Table 3.5: Descriptive Keywords for GALAXY . ... Table 3.13: Bright-Object Constraints . The use of "FIXED_TARGETS" and "GENERIC_TARGETS" are described in this chapter. ... In this chapter, each heading has a description followed by a keyword in square brackets (e.g., [ Number] ). ...

Program: GETVAL Purpose: Get image values at given positions in a set Category: UTILITY File: getval.c Author: M.G.R. Vogelaar Keywords: INSET= Give set (,subset): Maximum number of subsets is 1. ... The image values are formatted according the string entered in FORMAT= APPEND= Ok to append? ... The flag characters and their meanings are: - The result of the conversion is left- justified within the field. ... If the result of a conversion is longer than the field width, an asterisk is returned. ...

... Packet Format . ... The TCC broadcasts UDP packets containing position information. ... Packet Header . ... int4 . ... double . ... pos, vel double . ... pos, vel, time double . ... See the TCC Message Keywords Dictionary for full definitions of most items in the "data" section of the packet. pos, vel double is a structure containing two doubles: "pos" and "vel"; it contains the same information as the TCC's "coordinates" (p,v,t triplets), but with time given by the "TAIDate" entry in the packet. ...

... JavaScript 1.2: added name , text , x , and y properties Using the HTML A tag or calling the String.anchor method. The JavaScript runtime engine creates an Anchor object corresponding to each A tag in your document that supplies the NAME attribute. It puts these objects in an array in the document.anchors property. ... A string specifying the anchor's name. text . ... The horizontal position of the anchor's left edge, in pixels, relative to the left edge of the document. y . ... Anchor . ...

... Description . Catalog . ... In the Catalog, we publish equatorial (ЮБ 2000 , ЮД 2000 ) and galactic (l,b) coordinates of cluster centers derived as the position of overdensity in 2MASS catalog (Koposov et al. ... Distances, color-excesses and ages are the mean-square values calculated using all available evaluations from different color-magnitude diagrams. ... There are individual pages for every cluster where all available plots and parameters are published. ... 2002). ...

Section I: Introduction to ALFA and GALFA . Section II: System Description . ... ALFA receives 7 beams, 2 polarizations per beam, each covering 1225-1525 MHz. The 14 IF signals cover nominally the 100 to 400 MHz band. ... A high-resolution, low-bandwidth spectrometer (8K channels covering a 7 MHz bandwidth) . ... Each spectrometer board handles two polarizations from one telescope beam.The baseband signals are to be digitized by four 8-bit ADCs at 100 Msamples/sec. ... Bandwidth: . ...

Stellarium 0.12.3 . ... VertexP3T2 Struct Reference . Vertex with a 3D position and a 2D texture coordinate. ... VertexP3T2 (const Vec3f &position, const Vec2f texCoord) . Construct from a 3D position and 2D texture coordinate. ... VertexP3T2 (const Vec2f pos, const Vec2f texCoord) . Construct from a 2D position, setting the z coord to 0, and 2D texture coordinate. ... VERTEX_ATTRIBUTES ( Vec3f Position , Vec2f TexCoord) . ... position . ... VertexP3T2::VertexP3T2 . ... const Vec2f љ . ...

... Description . ... The SCORPIO-2 project: . ... The multi-mode spectrograph SCORPIO-2 was developed using the experience of observations at the 6-m telescope BTA with the SCORPIO focal reducer . ... The focal reducer consists of several units ('floors') mounted in the common case in the following order (from the telescope focal plane): . ... The focal reducer is connected with the platform-adapter which used for guiding by offset stars and for illumination the spectrograph by calibration lamps. ...

... Astrophysics Group . ... FIRST . ... This site is an initiative by MRAO Cambridge to provide improved access for the UK to the images being produced from the FIRST survey. ... Note that a small image returned by this server will have different gridding and orientation from an image of corresponding position and size returned by the FIRST CUTOUT server at the main site. ... This site may evolve to provide more of the facilities available at the FIRST main site in due course. ...

... The HST uses an onboard model of its orbit to perform in real-time various control functions relating to spacecraft operations and observation support. ... New coefficients for the ephemeris are updated every other day, and are archived as FITS keywords for each HST observation data set. Using these coefficients,an observer can perform a variety of calibration and characterization calculations relating to the orbital position and velocity of the telescope. ...

I/146 Positions and Proper Motions (Roeser+ 1988) ================================================================================ Catalogue of Positions and Proper Motions Roeser S., Bastian U. =1988A .. ... 449R ================================================================================ ADC_Keywords: Positional data; Proper motions Description: PPM North gives J2000 positions and proper motions of 181,731 stars north of -2.5 degrees declination. ... The mean epoch is near 1931. ...

Multichannel Flare Spectrograph . ... phi - the angle between the green vertical line passing through the solar disk image and the violet radius vector "r" of the object located at the center of the spectrograph slit- red cross. positive - clockwise, negative - counterclockwise . ... mx = x coordinate of the coelostat main mirror . ... x : carthesian solar coordinate alog axis parallel to solar equator (in arcsec) . y : carthesian solar coordinate alog axis parallel to solar axis (in arcsec) ...

... Exposure Time Calculator (ETC) . Survey processing . ... VISTA is a 4-m class wide field survey telescope for the southern hemisphere, equipped with a near infrared camera (1.65 degree diameter field of view at VISTA's nominal pixel size) containing 67 million pixels of mean size 0.34 arcsec and available broad band filters at Z,Y,J,H,K s and a narrow band filter at 1.18 micron. A wide field visible camera, if constructed, could also be used on VISTA. ... Tile . ... ESO VISTA Public Surveys . ...