... The SF does not contain all the information required to process the ODF with the SAS. odfingest extends the SF with data extracted from the instrument housekeeping data files and the calibration database. It creates a new summary file: the SAS ODF Summary File (SOSF). ... The user need not have write access to the ODF directory. odfingest uses the parameter outdir to learn where to write the SOSF. ... Alternatively, the name of the SOSF can be passed to odfingest with the parameter summaryfile . ...

... The Miriad task uvgen can be used to simulate a variety of observing modes. ... Simulating a telescope approximately, let alone in some detail, requires a good many parameters. uvgen takes an appreciable number of parameters and input files to describe the telescope, correlator and source. Fortunately keyword and set-up files for some common situations exist ( e.g. simulating the ATCA and VLA). ... For example, to load typical parameters for the ATCA, use miriad% source $MIRCAT/uvgen.def.atca . ...

... HST . ... Data . ... Annual Reports . ... HST Peer Review Process . ... Science Blog . ... HST Overview . Overview . ... Reporting Problems . Retrieving HST Data . ... Data Analysis . ... Instruments . ... HST Science Year in Review . ... GHRS Home . ... Data Handbook . ... However, there are some ways of seeing if similar effects are seen in similar circumstances. ... One aspect of GHRS operation recently came to our attention that appears to be directly correlated with the observed effect. ...

Next: Summary of reduction Up: Echelle Reduction Previous: Saving the Data . In the present version we will be concerned with the standard configuration of CASPEC, the Cassegrain Echelle Spectrograph which is in operation at the Cassegrain focus of the ESO 3.6 m telescope. ... In its standard configuration CASPEC uses a a 31.6 lines/mm echelle grating together with a 300 lines/mm grating cross disperser. ... The table shows the change in resolution with the order number. Table: Resolution . ...

... Co-ordinate systems description . Directories structure . The file names' construction . The file set description . ... The orbital information for each month is presented in the separate directory. The INTERBALL orbital data are located on the STDA server, for each month in the separate subdirectory, which name consists from the year (YYYY) and month (MM) numbers. The Parent Directory of the Tail Probe orbital data is http://www.iki.rssi.ru/da/interball/tail/orbit/ . ...

Next: Program use Up: Description of program searchdup Previous: Description of program searchdup . Parameter input is done with a graphic user interface. ... Input file: Name of the input catalog file. It has to be formatted, one record per source/observation, according to the format used in the Arcetri observations and source archives. ... Minimum number of observations per source Source with less than this number of independent observations are not included in the output file . ...

NAME ABbuilder - DFO data organization tool SYNOPSIS ABbuilder <options> where <options> are: --raw-dir directory containing raw data --cal-dir directory containing calib data --cal-ldir directory containing symbolic links to calib files --cal-list mcalib list --vcal-dir directory containing virtual products --pro-dir where pipeline products are created --ab-dir where association blocks are created --oca-rul file containing OCA rules --instrume instrument --date YYYY-MM-DD --mode { CALIB | ...

... Up: Iraf Packages . ... IRAF Group, NOAO 1 , PO Box 26732, Tucson, AZ 85726 . This paper describes a new IRAF spectroscopy exposure time calculator. ... SPTIME takes an input source spectrum, either a reference blackbody, power law, or a user spectrum, a background ``sky'', observing parameters such as exposure time, central wavelength, seeing, airmass, and moon phase, instrument parameters such as aperture sizes and detector binning, a description of the spectrograph, and desired output. ...

The Wideband Arecibo Pulsar Processor - File Format Page . WAPP files have three sections that appear sequentially in this order: an ASCII header description, the binary header, and finally the actual binary data. ... The WAPP realtime observation engine does not produce files larger that 2 Gbytes. At one time this represented a fundamental limit to Linux files. ... Each file will have it's own header, even when the files are simply continuations of a single observation. ... long int . ...

... 18-Jan-2010 17:22 . ... Apache/2.2.3 (CentOS) Server at www.wdcb.ru Port 80 ...

... Description . ... The SCORPIO-2 project: . ... The multi-mode spectrograph SCORPIO-2 was developed using the experience of observations at the 6-m telescope BTA with the SCORPIO focal reducer . ... The focal reducer consists of several units ('floors') mounted in the common case in the following order (from the telescope focal plane): . ... The focal reducer is connected with the platform-adapter which used for guiding by offset stars and for illumination the spectrograph by calibration lamps. ...

... There are a lot of computer codes simulating this scattering and freely available in the Internet (see e.g. links on our JPDOC page ). ... The code and input file are available in the directory . ... A slightly modified code of Barber Hill with a C-shell and input files is available in the directory . ... The code, input and test output files are available in the directory . ... See also readme file. file. ... The code, input file and their description (a TeX file) are available in the directory . ...

Next: The /dev directory Up: The root filesystem Previous: The root filesystem . The /etc љ directory contains a lot of files. ... See the chapter on init љ for further information. /etc/passwd љ . ... Lists the filesystems mounted automatically at startup by the mount -a command (in /etc/rc љ or equivalent startup file). ... etc/issue љ . ... See the magic љ and file љ manual pages for more information. /etc/motd љ . ... Files executed at login or startup time by the Bourne or C shells. ...

... Created: 23 February 2001 . ... SOFTWARE MAINTENANCE MANUAL . ... 9 January 2001 . ... Note: in the final document, the table of contents will be to third level] . The Software Maintenance Manual describes the procedures for installation and maintenance of the software for the Gemini Near-infrared Integral Field Spectrograph (NIFS). ... Section 19.4.3 of the document “Programmatic Requirements for Gemini Instrumentation Development” states the requirements for the Software Maintenance Manual . ...

gmtset - To change individual GMT default parameters gmtset PARAMETER1 value1 PARAMETER2 value2 PARAMETER3 value3 ... gmtset will adjust individual GMT defaults settings in the current directory's .gmtdefaults file. If no such file exists one will be created. ... To change the dpi to 600, set anotation font to Helvetica, and select grid-crosses of size 0.1 inch, try gmtset DOTS_PR_INCH 600 ANOT_FONT Helvetica GRID_CROSS_SIZE 0.1i gmt , gmtdefaults . ...

... Several of the tasks in the spectral package share a common set of parameters. ... Each task in the spectral package has a hidden parameter which points to the pkgpars parameter file. The parameters stored here include the observed data sets and the model descriptor, and instrument-specific parameters. ... The observed counts and error data set contained in the table file ( *_obs.tab ) produced by qpspec will be the input data for subsequent spectral tasks. ...

... Exposure Time Calculator (ETC) . ... ESO - Public Surveys . ... the recommended values to use for DIT, . ... Detector on-chip integration (DIT): seconds. to your chosen value - a separate page gives recommended values to use for DIT - for modes 1 and 2 below you may wish to start with the maximum recommended values as these will minimize the effect of read noise (a total object exposure of Y secs with DIT=X secs will produce Y/X lots of read noise) and give you a lower limit on the time needed. ...

Orbital data : INTERBALL AZ GSE and GSM cartesian coordinates, GSE cartesian velocity (once per 10 minutes). ... Magnetic field data from IMAP experiment. Magnetic fileld absolute value and magnetic field index (the difference between absolute value and model value), status flag. ... Counts of H+ and O+ ions are accumulated during one spin period by detectors D6 (antisunward looking), D8 (spin plane), D10 (sunward looking) of TRICS2 subsystem (1.0-30 keV). ... TRICS1, TRICS2, TRICS3 subsystems: . ...

Stellarium 0.12.3 . ... Classes . ... FileљStructure . ... Landscape Class Reference abstract . ... More... #include < Landscape.hpp > . ... Landscape (float _radius=2.f) . ... load (const QSettings &landscapeIni, const QString &landscapeId)=0 . ... setBrightness (const float b) . ... floatљ . ... const QStringљ . getTexturePath (const QString &basename, const QString &landscapeId) . ... const floatљ . ... Definition at line 42 of file Landscape.hpp . ... const QString Landscape::getTexturePath . ...

... Basic Observables: Zero-differenced phase and code ionosphere-free combinations of global GNSS network stations, corrected by P1-C1 satellite code biases (cc2noncc), daily observations with 30 seconds sampling rate Sites coordinates : IGb08 reference frame coordinates and velocities Displacements: solid tides, ocean loading, pole tide loading (IERS 2010) Geometric model : Receivers antennas eccentricities, absolute receiver and ...