... 18-Jan-2010 17:22 . ... Apache/2.2.3 (CentOS) Server at www.wdcb.ru Port 80 ...

... The table is used/accessed by: . CAL_getHKwindows() : Table with HK parameter validity data; data outside the given validity intervals may indicate degraded science quality and ought to be screened in the pipeline reduction by means of GTI filtering . ... 5-character short ID of parameter as found in the ODF HK data (e.g. F1123) . ... validity interval of the parameter in the form of a valid selectlib expression; '@' characters may be used instead of the parameter name; e.g. @ in [-91.0:-89.0] . ...

... CentralProcessor 0.11 documentation . ... Here we detail the input parameters that cover the overall process control, and the switches to turn on & off different parts of the pipeline. Values for parameters that act as flags (ie. those that accept true/false values) should be given in lower case only , to ensure comparisons work properly. These parameters affect how the slurm jobs are set up and where the output data products go. ... SUBMIT_JOBS . ... User Parameters - Pipeline & job control . ...

... Co-ordinate systems description . Directories structure . The file names' construction . The file set description . ... The orbital information for each month is presented in the separate directory. The INTERBALL orbital data are located on the STDA server, for each month in the separate subdirectory, which name consists from the year (YYYY) and month (MM) numbers. The Parent Directory of the Tail Probe orbital data is http://www.iki.rssi.ru/da/interball/tail/orbit/ . ...

Next: Format of the Up: Auxiliary Data Previous: Description of the . For convenience in table handling only values for single lines or doublets (most of the observed cases) can be entered. If higher multiplicities are actually needed small changes have to be made in the table and program format. Possibility for 50 different atomic transitions. N.B. : in case of doublets, columns 3, 5, 7, 9, and 11 refer to the reddest component, and columns 4, 6, 8, 10 and 12 to the bluest. ...

Next: Program use Up: Description of program searchdup Previous: Description of program searchdup . Parameter input is done with a graphic user interface. ... Input file: Name of the input catalog file. It has to be formatted, one record per source/observation, according to the format used in the Arcetri observations and source archives. ... Minimum number of observations per source Source with less than this number of independent observations are not included in the output file . ...

... SFIT is a general-purpose code designed to optimize theoretical stellar spectra to an observed spectrum. ... While the programme expects input from "stdio", it is more natural to save commands in a file (eg "sfit_input") and run the code simply by . ... If the spectra to be fitted have a filename "star_spectrum", then the best fit spectrum will be written out, together with the renormalized input spectrum, to a file called "star_spectrum.fit". ... sets up model spectrum grid (and for 2nd star) . ...

... This tool is designed to create formatted and unformatted file-by-file reports from fits headers, or fits files. fitsreport reads from a configuration file all the keys to be displayed: . ... retrieve non-FITS information (file name, path name). ... The tool reads all fits files in the given path, evaluates the configuration file fitsreport_raw.cfg (to be in ${DFO_CONFIG_DIR}) and dumps the output into out. ... This is more evident in the other config file, fitsreport_raw.cfg. ...

... As with previous HST instruments, the FITS header keywords in STIS data files store important information characterizing the observations and telemetry received during the observations and describe the post-observation processing of your dataset. ... Calibration information such as the calibration switches and reference files used by the pipeline and parameters derived from the calibration, such as image statistics, wavelength shifts. ... Time: 0.3 sec Number of imsets: 3 . ... Dark image correction...

RTT150 . ... This optical scheme is similar to 1:7.7 system but has the different parameters of secondary mirror 2 and corrector 3. Primary mirror 1 reflects light to the secondary mirror 2 which collects it on the focal surface of system. Lens corrector 3 is placed between focal surface and the secondary mirror which allows to obtain large flat linear field of 100 mm diameter. Focal length, mm . ... Linear field of view, mm . ... Angular field of view . ... 0.039 mm, %, at least . ...

... Prev . ... comedi_from_phys -- convert physical units to sample . ... lsampl_t comedi_from_phys (double data, comedi_range * range, lsampl_t maxdata); . Converts data given in physical units (data) into sample values (lsampl_t, between 0 and maxdata). The parameter rng represents the conversion information to use, and the parameter maxdata represents the maximum possible data value for the channel that the data will be written to. Conversion is not affected by out-of-range behavior. ...

... IRAF supports two kinds of parameters, auto parameters and hidden parameters, which are treated differently. auto parameters are updated every time a task is run. ... Parameters for each task are contained in `parameter files' in the uparm sub-directory in `myiraf'. ... im > imhead.longheader=yes # explicitly setting <task.param>=<value> im > eparam imhead # Edit the parameter file to update one or more # parameters at the same time # see next section . ...

... S-High Receiver . ... Calibration Beam Parameters . ... Contact Info :1 . ... See calibration info below for a more accurate description of the telescope parameters . ... back to top] . ... Here is a recommended internal memo on this subject (even though this Receiver wasn't available at the time of these observations): Main Beam and First Sidelobe Parameters for Arecibo's Receiver Systems by C. Heiles et al (5MB PS file ) . ... Receiver History: The Receiver was installed in 2001. [back to top] . ...

seeing -- Create a simulated ground-based star image based on a model of atmospheric turbulence seeing output xdim ydim gamma fwhmx fwhmy . output = "" [image] . The name for the output image to be created. xdim = 512 [integer] . The X dimension for the output image. ydim = 512 [integer] . The Y dimension dor the output image. gamma = 1.6666 [real] . ... For a discussion of the significance of this please see the discussion below and the references given. fwhmx = 5.0 [real] . ...

... SphereParams Struct Reference . ... SphereParams (const float radius) . ... Definition at line 50 of file StelGeometryBuilder.hpp . ... Definition at line 103 of file StelGeometryBuilder.hpp . ... Definition at line 120 of file StelGeometryBuilder.hpp . ... Definition at line 112 of file StelGeometryBuilder.hpp . ... Definition at line 118 of file StelGeometryBuilder.hpp . ... Definition at line 110 of file StelGeometryBuilder.hpp . ... Definition at line 114 of file StelGeometryBuilder.hpp . ...

Atmospheric influence on the different radio-engineering system functioning . ESTIMATION OF ATMOSPHERIC OPTICAL CHARACTERISTICS AND REMOTELY SANSED IMAGE CORRECTION . ... Direct transmittance estimation results for 12 channels of the spectrometer CHRIS. ... We have managed to develop a direct method of estimating the discrete Normalized Atmospheric Point Spread Function (NAPSF) from available images alone, not using any external sources of information about the atmosphere. ... IRE RAS 1996-20 11 ...

Orbital data : INTERBALL AZ GSE and GSM cartesian coordinates, GSE cartesian velocity (once per 10 minutes). ... Magnetic field data from IMAP experiment. Magnetic fileld absolute value and magnetic field index (the difference between absolute value and model value), status flag. ... Counts of H+ and O+ ions are accumulated during one spin period by detectors D6 (antisunward looking), D8 (spin plane), D10 (sunward looking) of TRICS2 subsystem (1.0-30 keV). ... TRICS1, TRICS2, TRICS3 subsystems: . ...

. There are several different shells available for Unix; the most popular are described here. You can use any one of these shells if they are available on your system. And you can switch between the different shells once you have found out if they are available. Bourne shell (sh) . C shell (csh) . TC shell (tcsh) . Korn shell (ksh) . Bourne Again SHell (bash) .

... Description . Catalog . ... In the Catalog, we publish equatorial (ЮБ 2000 , ЮД 2000 ) and galactic (l,b) coordinates of cluster centers derived as the position of overdensity in 2MASS catalog (Koposov et al. ... Distances, color-excesses and ages are the mean-square values calculated using all available evaluations from different color-magnitude diagrams. ... There are individual pages for every cluster where all available plots and parameters are published. ... 2002). ...

... CREATE FULLTEXT CONFIGURATION -- create full-text configuration . CREATE FULLTEXT CONFIGURATION cfgname PARSER prsname [ LOCALE localename ] [ AS DEFAULT ]; CREATE FULLTEXT CONFIGURATION cfgname [ { PARSER prsname | ... PARSER . ... LOCALE . ... Create new configuration test with default parser and ru_RU.UTF-8 locale. CREATE FULLTEXT CONFIGURATION test PARSER default LOCALE 'ru_RU.UTF-8'; =# \dF+ test Configuration "public.test" Parser name: "pg_catalog.default" Locale: 'ru_RU.UTF-8' Token | ...