... Instruments . ... Exposure_Number: 1 Target_Name: HD12345 Config: HRS Opmode: ACQ Aperture: 2.0 Sp_Element: MIRROR-N1 Wavelength: Optional_Parameters: BRIGHT=RETURN, ! ... Number_of_Iterations: 1 Time_Per_Exposure: 13.5S Special_Requirements: ONBOARD ACQ FOR 2 Comments: STEP-TIME = 1.5 sec Exposure_Number: 2 Target_Name: HD12345 Config: HRS Opmode: ACQ/PEAKUP Aperture: 0.25 Sp_Element: MIRROR-N1 Wavelength: Optional_Parameters: SEARCH-SIZE=5 ! ...

Еще в разделе: (Показать все результаты (>26058) - www.stsci.edu/ )

• ACS pointing
• GHRS Instrument Handbook Image Mode
• Changes in the STIS ETC

... Meta Index / Home Page This section documents the parameters recognized by this task (if any). ... string . ... yes|no . Yes' forces overwrite of colimchain output. astest . ... Yes' invokes asmooth to smooth the input images before they are supplied to colimplot . ... The maximum allowed value of the width of the smoothing gaussian is specified via this parameter. desiredsnr . ... The maximum desired signal-to-noise ratio of the output image can be specified via this parameter. nconvolvers . ...

Еще в разделе: (Показать все результаты (>23659) - xmm.vilspa.esa.es/ )

... Several of the tasks in the spectral package share a common set of parameters. ... Each task in the spectral package has a hidden parameter which points to the pkgpars parameter file. The parameters stored here include the observed data sets and the model descriptor, and instrument-specific parameters. ... The observed counts and error data set contained in the table file ( *_obs.tab ) produced by qpspec will be the input data for subsequent spectral tasks. ...

Еще в разделе: (Показать все результаты (>4819) - hea-www.harvard.edu/ )

• *search_grid* - Grid of - default mode
• Parameters
• Spectral Analysis

... The Miriad task uvgen can be used to simulate a variety of observing modes. ... Simulating a telescope approximately, let alone in some detail, requires a good many parameters. uvgen takes an appreciable number of parameters and input files to describe the telescope, correlator and source. Fortunately keyword and set-up files for some common situations exist ( e.g. simulating the ATCA and VLA). ... For example, to load typical parameters for the ATCA, use miriad% source $MIRCAT/uvgen.def.atca . ...

Еще в разделе: (Показать все результаты (>35631) - www.atnf.csiro.au/ )

• Tasks
• Initial ``fixes'' to millimetre data
• User Parameters - Data Location & Beam Selection CentralProcessor 0.11

... Meade Instruments Corporation . ... Section 3: File Menu . ... Displays the dialog to open an existing image: . ... Saves the current image as a new file name or new file type, or both. ... This can be useful to prevent having 20 or more images open at once, and saves having to close them manually. ... This is done by creating a text file with the same name as the image file. ... Note that Image Information is saved within the FITS file, so there will not be a text file to accompany these files. ...

Еще в разделе: (Показать все результаты (>2507) - www.meade.com/ )

• Meade Instruments Corp. - Meade Customer Support
• Meade Instruments Corporation - Pictor Manual Part 2

CIMA is more than just the observing tool - in fact, the observing tool is just a part of a bigger package called the CIMA software package. ... There is also a another package called the CIMA WAPP software which contains the WAPP software, the special Tcl/Tk interpreter used by CIMA and support libraries. ... All CIMA software components recognize the following general options that are part of the CIMA version selection system: . ... The select_cima script can be used to set up a default version. ...

Еще в разделе: (Показать все результаты (>7208) - www.naic.edu/ )

• CIMA Auto-Observing
• Submitting New Observing Modes to AO
• CIMA Source Catalogs

NAME ABbuilder - DFO data organization tool SYNOPSIS ABbuilder <options> where <options> are: --raw-dir directory containing raw data --cal-dir directory containing calib data --cal-ldir directory containing symbolic links to calib files --cal-list mcalib list --vcal-dir directory containing virtual products --pro-dir where pipeline products are created --ab-dir where association blocks are created --oca-rul file containing OCA rules --instrume instrument --date YYYY-MM-DD --mode { CALIB | ...

Еще в разделе: (Показать все результаты (>67190) - www.eso.org/ )

• Observing list preparation
• ESO - Common Pipeline Library
• System configuration

... Up: Iraf Packages . ... IRAF Group, NOAO 1 , PO Box 26732, Tucson, AZ 85726 . This paper describes a new IRAF spectroscopy exposure time calculator. ... SPTIME takes an input source spectrum, either a reference blackbody, power law, or a user spectrum, a background ``sky'', observing parameters such as exposure time, central wavelength, seeing, airmass, and moon phase, instrument parameters such as aperture sizes and detector binning, a description of the spectrograph, and desired output. ...

Еще в разделе: (Показать все результаты (>1837) - www.adass.org/ )

• NICMOS Calibration Pipeline: Processing Associations of Exposures
• ETCs and Observations Simulation at the VLT
• Observing Control at the UKIRT

... Exposure Time Calculator (ETC) . ... ESO - Public Surveys . ... the recommended values to use for DIT, . ... Detector on-chip integration (DIT): seconds. to your chosen value - a separate page gives recommended values to use for DIT - for modes 1 and 2 below you may wish to start with the maximum recommended values as these will minimize the effect of read noise (a total object exposure of Y secs with DIT=X secs will produce Y/X lots of read noise) and give you a lower limit on the time needed. ...

Еще в разделе: (Показать все результаты (>28) - www.vista.ac.uk/ )

• VISTA - Visible and Infrared Survey Telescope for Astronomy

Next: Calibration Frames and Up: CCD Reductions Previous: General Overview of . ... However, apart from a few cases the keyword setting itself is not modified: principally, keywords can only be changed by the SET/CCD command. ... After (partially) having finished a CCD reduction the user may want to store the current keyword setting. ... The keyword setting can be restored by the command INIT/CCD red_table , where red_table is the reduction table containing the CCD keyword setting, previously saved. ...

Еще в разделе: (Показать все результаты (>3442) - www.sao.ru/ )

• Setting, Saving, and Retrieving CCD Keywords
• Session Parameters
• Permanent telescope parameters

The problem of solar wind data correlation for the observations onboard several spacecraft is very important for three points of view: . ... This problem is studied now in detail by systematic determination of ion flux and ion velocity data correlations by INTERBALL-1 (IKI group), WIND and IMP 8 (both - MIT group). ... Solar wind plasma correlation lengths from IMP 8, WIND and INTERBALL-1. ... Correlation of solar wind observations onboard several spacecraft: INTERBALL-1, IMP 8 and WIND data. ...

Еще в разделе: (Показать все результаты (>1937) - www.cosmos.ru/ )

• ASCII files description
• STDA files

... Contact us . ... Astrophysics Group . ... Software for Astrophysics . MADCOW . ... BLACS , ScaLAPACK , MPI (for parallelised version only) . ... The mock data files (1.8 MB) and scripts used in the simulations presented in astro-ph/0201438 . ... Various minor fixes . ... BUGFIX: Some nasty memory corruption bug has been fixed that used to strike randomly after several hours of computation time in the distributed version (single processor version and shared memory multi-processor not affected). ...

Еще в разделе: (Показать все результаты (>5107) - www.mrao.cam.ac.uk/ )

• OptInt PmWiki : PmWiki / Upload Variables
• OptInt PmWiki : Upload Variables
• OptInt PmWiki : PmWiki / Initial Setup Tasks

. APO Weather Status . Current APO Weather Information . Observing Calendars . Observing Schedules (TBD) . Night Log Form (web form) or (text template) . Archived Night Logs (TBD) . User's Mail Servers . Telescope Closure Policy . IAU Circulars (TBD - restricted to APO) . Catalog of UV and Optical Standards (TBD) . Coming to the Site . Staff Directory . Current Sky Calendar .

Еще в разделе: (Показать все результаты (>1255) - www.apo.nmsu.edu/ )

• APO Home Page
• Astrophysical Research Consortium - Apache Point Observatory
• default

Routines can now be called with keyword arguments and can use default arguments, that means that some arguments can be given with keywords instead of position and some do not have to be given at all, in which case a standard or default value is used. ... IMPLICIT NONE INTERFACE SUBROUTINE SOLVE (A, B, N) INTEGER, INTENT (IN) : : N REAL, INTENT(OUT) : : A REAL, INTENT(IN), OPTIONAL : : B END SUBROUTINE SOLVE END INTERFACE REAL X ! ... You will use keyword arguments and default arguments so that . ...

Еще в разделе: (Показать все результаты (>6417) - crydee.sai.msu.ru/ )

• Tutorial on Fortran 90, Digital UNIX
• NAG's Fortran 90
• SunSoft

gmtset - To change individual GMT default parameters gmtset PARAMETER1 value1 PARAMETER2 value2 PARAMETER3 value3 ... gmtset will adjust individual GMT defaults settings in the current directory's .gmtdefaults file. If no such file exists one will be created. ... To change the dpi to 600, set anotation font to Helvetica, and select grid-crosses of size 0.1 inch, try gmtset DOTS_PR_INCH 600 ANOT_FONT Helvetica GRID_CROSS_SIZE 0.1i gmt , gmtdefaults . ...

Еще в разделе: (Показать все результаты (>629) - xray.sai.msu.ru/ )

• Initial Distributions of Binary Parameters
• Restrictions on the Scenario Parameters
• Parameters of binary compact star evolution

... The IDL users can call these codes by the CALL_EXTERNAL function with the following syntax: res=CALL_EXTERNAL(libname, 'GET_MW', ParmIn, s, /F_VALUE) Here libname is the name of the appropriate dynamic link library or shared ob ject. ... Then, ParmIn is the 29-element single-precision floating-point array that contains the input parameters for the gyrosynchrotron code, and s is the two-dimensional single-precision floatingpoint array that contains the results of the computation. ...

Еще в разделе: (Показать все результаты (>3450) - star.arm.ac.uk/ )

• http://star.arm.ac.uk/~spm/software/liveice_usage.html
• Sfit Control Language: Classified Listing
• SCL Sfit Commands

Since XmCCD uses Motif, the libraries and include files must be available. ... By default it will create a directory xmccd-#.# with the command tar -xvzf xmccd-#.#.tar Set your current working directory to xmccd-#.# cd xmccd-#.# ... For "ls -l" you should see something like this -rwsr-xr-x 1 root root 281883 Mar 10 01:08 xmccd Move xmccd to a directory in your search path such as /usr/local/bin mv xmccd /usr/local/bin xmccd will use ds9 for image display if it is present. ...

Еще в разделе: (Показать все результаты (>2265) - www.astro.louisville.edu/ )

• Observing for Students and Visitors
• CurveFitter (ImageJ API)
• Menus (ImageJ API)

... Apache HTTP Server Version 2.4 . ... Session encryption support . ... session_crypto_module . ... The session will be encrypted with the given key. Different servers can be configured to share sessions by ensuring the same encryption key is used on each server. ... The SessionCryptoPassphrase directive specifies the keys to be used to enable symmetrical encryption on the contents of the session before writing the session, or decrypting the contents of the session after reading the session. ...

Еще в разделе: (Показать все результаты (>11924) - www.arcetri.astro.it/ )

• mod_proxy_ftp - Apache HTTP Server
• mod_ext_filter - Apache HTTP Server
• Observing capabilities

... FileљStructure . ... After downloading all the catalogues, the paths to the various files should look like this: Installation Data Directory / stars / default / stars _0_0v0_1.cat Installation Data Directory / stars / default / stars _1_0v0_1.cat Installation Data Directory / stars / default / stars _2_0v0_1.cat Installation Data Directory / stars / ... In this case, all the files would be in the <Installation Data Directory>/stars/default directory. ...

Еще в разделе: (Показать все результаты (>1225) - astro.uni-altai.ru/ )

• Stellarium: /home/aw/devel/stellarium/trunk/doc/fileStructure.doxygen Source
• Stellarium: Landscape Class Reference
• Stellarium: TextParams Struct Reference

... CREATE FULLTEXT CONFIGURATION -- create full-text configuration . CREATE FULLTEXT CONFIGURATION cfgname PARSER prsname [ LOCALE localename ] [ AS DEFAULT ]; CREATE FULLTEXT CONFIGURATION cfgname [ { PARSER prsname | ... PARSER . ... LOCALE . ... Create new configuration test with default parser and ru_RU.UTF-8 locale. CREATE FULLTEXT CONFIGURATION test PARSER default LOCALE 'ru_RU.UTF-8'; =# \dF+ test Configuration "public.test" Parser name: "pg_catalog.default" Locale: 'ru_RU.UTF-8' Token | ...

Еще в разделе: (Показать все результаты (>3182) - www.sai.msu.su/ )

• FTS Dictionary Example
• ALTER FULLTEXT CONFIGURATION
• Psql support