The File System . ... Files are identified to the system using a unique identifier called the file specification , which can include disk and directory names as well as node names for accessing files across the network. On VMS systems, file names are usually thought of as having three parts *1 : the filename , the file type , and the version number . ... The full file specification, with node name, device, directory, file name, file type, and version being specified is shown in Figure 3.1 . ...

This document describes how number input can be given to tasks which request numbers from Hermes. ... list selection The following constants are implemented: pi 3.14159.... c speed of light (SI) h Planck (SI) k Boltzmann (SI) g gravitation (SI) s Stefan-Boltzman (SI) m mass of sun (SI) p parsec (SI) BLANK Universal undefined value The following mathematical functions are implemented: abs(x) absolute value of x sqrt(x) square root of x sin(x) sine of x asin(x) inverse sine ...

... Each DFS Department official document has to be issued according to the following internal procedure. Documents to be distributed outside DMD division must also be issued according to the Technical Archive procedure . ... Several documents are also available as complete templates defined internally for DFS Department documentation (e.g. template for Test Plan, for Test Report, .. ... Define the internal document number as: dfs-volxx-yyy-zzzz . ... Document title, . ... Issue number (e.g. 1). ...

Next: Calibration Frames and Up: CCD Reductions Previous: General Overview of . ... However, apart from a few cases the keyword setting itself is not modified: principally, keywords can only be changed by the SET/CCD command. ... After (partially) having finished a CCD reduction the user may want to store the current keyword setting. ... The keyword setting can be restored by the command INIT/CCD red_table , where red_table is the reduction table containing the CCD keyword setting, previously saved. ...

This module provides support for dynamically configured mass virtual hosting . ... Source File: mod_vhost_alias.c . ... For simple name-based virtual hosts you might use the following directives in your server configuration file: UseCanonicalName Off VirtualDocumentRoot /usr/local/apache/vhosts/%0 . A request for http://www.example.com/directory/file.html will be satisfied by the file /usr/local/apache/vhosts/www.example.com/directory/file.html . ... Module: mod_vhost_alias . ...

... Directives | ... Apache HTTP Server Version 2.2 . ... The most important directives used to control this MPM are ThreadsPerChild , which controls the number of threads deployed by each child process and MaxClients , which controls the maximum total number of threads that may be launched. ... Two directives set hard limits on the number of active child processes and the number of server threads in a child process, and can only be changed by fully stopping the server and then starting it again. ...

Fortran 90 properties already in CF77 . ... Only the old form (fix form) of the source code is available. ... LOGICAL Default KIND number = 8 INTEGER Default int7 int15 KIND number = 6 1 2 digits = 46 7 15 radix = 2 2 2 range = 13 2 4 huge = 70368744177663 127 32767 bit_size = 46 8 16 INTEGER int31 int46 int64 KIND number = 4 6 8 digits = 31 46 63 radix = 2 2 2 range = 9 13 18 huge = 2147483647 70368744177663 9223372036854775807 bit_size = 32 46 46 REAL half Default,single double KIND ...

... Statistic files are managed using file generation sets and scripts in the ./scripts directory of this distribution. ... Each valid update appends a line of the following form to the current element of a file generation set named peerstats : . ... This keyword allows the (otherwise constant) filegen filename prefix to be modified for file generation sets, which is useful for handling statistics logs. filegen name [ file filename ] [ type typename ] [ flag flagval ] [ link | ...

Astronomy Discussion Forums . Forums: . ... How Do You Feel About Numbers? ... Post Message | ... Posted by Richard D. Stafford, Ph.D. on September 15, 2002 16:22:25 UTC . ... Wait - harvey1 - September 15, 2002 - 22:20 UTC . I don't follow you! - doctordick - September 16, 2002 - 14:59 UTC . ... www.astronomy.net . About Astronomy Net | ... Forum posts are Copyright their authors as specified in the heading above the post. "dbHTML," "AstroGuide," "ASTRONOMY.NET" & "VA.NET" . ...

... In the above example, the second region uses the global coordinate system (PHYSICAL by default). ... Supported systems include: name description ---- ----------- PHYSICAL pixel coords of original file using LTM/LTV IMAGE pixel coords of current file FK4, B1950 sky coordinate systems FK5, J2000 sky coordinate systems GALACTIC sky coordinate systems ECLIPTIC sky coordinate systems ICRS currently same as J2000 LINEAR linear wcs as defined in file In addition, two mosaic coordinate ...

... List of SAS threads . This thread contains a (very!) simple standard XSPEC session for fitting data from the X-ray cameras. ... Start XSPEC . ... Load spectrum data: . ... response 1 PN.rmf . ... plot data . Fig.1: XSPEC data plot . Ignore bad channels in data: . ... The latter, the maximum number of channels to bu summed. plot data with model adjustment and e.g. the residuals (alternatives, ratio data/model, absolute chi-squared, etc) . ... Fig.2: XSPEC data, model and residual plot . ...

The Preferences window allows you to specify various application preferences (surprise!) It is brought up by selecting Preferences from the TUI Menu. ... Each preference may be edited by clicking on it. If the value is changed to anything other than the current value then an exclamation mark is shown between the name and the value. ... Seq By File : controls whether whether images are numbered in the order taken (unchecked) or are numbered separately for each image name (checked). ...

For calculating model spectra of early-type helium stars in LTE, we maintain a database of atomic data for, mostly, blue-visual absorption lines of light elements. The data is sorted with one file for each ion. ... III = ++ . ... It will work on both complete linelists (including the atomic data at the start and references at the end) or raw ion files (such as Ni2.d). ... A Fortran utility to convert linelists downloaded from the Vienna Atomic Line Database into the new QUB format. synspec_qub . ...

Up: DATA ANALYSIS Previous: More Analyz Stuff . In this section we describe some useful routines for quick-look on-line analysis of your data. For a complete description of the routines, and for a description of analyzing HI spectra, look at the Spectral Line Appendices. ... cd a9999 [or whatever your project number is . ... corinfo = List the current set-up parameters. ... That is, if you want to look at the second data dump of scan number 57401, you `just' type ``corget 57401.00002". ...

... fork() . ... A process is basically a single running program. ... System is prototyped in <stdlib.h> . ... Each command and sorresponding arguments are put in a args array */ /* execvp is called to execute these commands in child process */ /* spawned by fork () */ /* cc -o fork fork .c */ #include stdio.h #include sys/types.h #include unistd.h main() { char buf [1024]; char * args [64]; for (;;) { /* * Prompt for and read a command. */ printf( Command: ); if (gets( ...

There are six possible ways of object description: . a) by number(s) . ... d) by list . e) by orbital elements . ... They should be introduced as year, month, day with tenth (e.g. 20021104.1). d) Computations are performed for all objects listed in the file whose path and name should be introduced into assigned data field. ... On pressing Edit file button user has a possibility to look through the list of object elements or their coordinates and velocities to add or to change it. ...

OptInt PmWiki : Pm Wiki / Wiki Style Examples . Wiki styles | ... PmWiki uses WikiStyles for styling text with color and other attributes. PmWiki 2.0 introduced the ability to control the styling further and to even place styles on blocks. ... In addition, an author can define a style "shortcut" by using the define= property. For example, to define a style of %red% , one can use: . define=mystyle color=red% Here is some %mystyle% red text created using a style shortcut. ...

... Content Model: Optional list header (LH), followed by one or more list items (LI) . An ordered list typically is a numbered list of items. ... The numbering style is left to associated style sheets, e.g. whether nested lists contribute to a compound item number, e.g. "3.1.5", or whether numbers are rendered as arabic, upper or lower case roman numerals or using the numbering scheme appropriate to the language context. ... CLASS . ... The CLEAR attribute allows you to move down unconditionally: . ...

Next: Navigation Pre-Observation Products . ... SRT (Space Radio Telescope) Schedule (SRS) File . ... What: GOCG generates the Space Radio Telescope (SRT) schedule file, or SRS file, from current GSTS file. The SRS file has more precise time stamps than long-term schedules, and also designates which GTS will be used when. ... The SRS file also serves as the antenna pointing schedule file, as it describes the planned orientation of the spacecraft (and solar panels) as a function of time. ...

... the data are described accurately enough to allow an unambiguous interpretation of the data, as well as a comprehension of the context in which the data were acquired and/or processed; a single ascii file, named ReadMe , is designed for this role. the data are in a format which allows their usage by tools currently in usage in our discipline -- normally flat ascii files ; other formats can be accepted, but are converted into flat files. ... How to prepare the Data files . ... How to deposit the data...