... HST Phase II Proposal Instructions for Cycle 20 > Chapter 13: Wide Field Camera 3(WFC3) > 13.1 Introduction to WFC3 . ... More complete descriptions of Instrument Configurations, Modes, Apertures, Spectral Elements, Detector Characteristics, etc. are available in the WFC3 Instrument Handbook . ... Table 13.1 lists the permitted WFC3 Instrument Configurations, Operating Modes, Apertures, Spectral Elements, and Optional Parameters. ... Optional Parameters . ... See Table 13.2: Apertures for WFC3/UVIS ...

... This is done by taking in all input files the extension whose name is specified by the maintable parameter (called 'merged extension' in what follows) and merging the columns into a single output extension of the same name. ... Its contents is taken from the CCDID keyword (and QUADRANT for EPIC PN). ... To propagate other column specific keywords, they must be specified manually via the extensionchecks , mainattributes , maxattributes and minattributes parameters (see above). ...

Next: Echelle Reduction Method Up: No Title Previous: Example . This Chapter provides the basic information necessary to understand the echelle љ package implemented in MIDAS . ... Tutorial examples are available in the system (command TUTORIAL/ECHELLE ) and are also included in the Appendix so that users without previous experience in MIDAS could become familiar with the calibration procedures. ... Reduction steps which are not specific to echelle spectra are described in more detail in Chapter . ...

... CentralProcessor 0.11 documentation . Calibration and Imaging Documentation . ... The purpose of this software is to apply calibration parameters to Measurement Sets. It can be run with the following command, where ?config.in? is a file containing the configuration parameters described in the next section. $ ccalapply -c config.in . ... The name of the measurement set to which the calibration parameters will be applied. calibrate.scalenoise . bool . ... ccalapply (Calibration Applicator) . ...

... Created: 23 February 2001 . ... SOFTWARE MAINTENANCE MANUAL . ... 9 January 2001 . ... Note: in the final document, the table of contents will be to third level] . The Software Maintenance Manual describes the procedures for installation and maintenance of the software for the Gemini Near-infrared Integral Field Spectrograph (NIFS). ... Section 19.4.3 of the document “Programmatic Requirements for Gemini Instrumentation Development” states the requirements for the Software Maintenance Manual . ...

... Apache HTTP Server Version 2.4 . ... Session encryption support . ... session_crypto_module . ... The session will be encrypted with the given key. Different servers can be configured to share sessions by ensuring the same encryption key is used on each server. ... The SessionCryptoPassphrase directive specifies the keys to be used to enable symmetrical encryption on the contents of the session before writing the session, or decrypting the contents of the session after reading the session. ...

... This tool is designed to create formatted and unformatted file-by-file reports from fits headers, or fits files. fitsreport reads from a configuration file all the keys to be displayed: . ... retrieve non-FITS information (file name, path name). ... The tool reads all fits files in the given path, evaluates the configuration file fitsreport_raw.cfg (to be in ${DFO_CONFIG_DIR}) and dumps the output into out. ... This is more evident in the other config file, fitsreport_raw.cfg. ...

Fortran 90 properties already in CF77 . ... Only the old form (fix form) of the source code is available. ... LOGICAL Default KIND number = 8 INTEGER Default int7 int15 KIND number = 6 1 2 digits = 46 7 15 radix = 2 2 2 range = 13 2 4 huge = 70368744177663 127 32767 bit_size = 46 8 16 INTEGER int31 int46 int64 KIND number = 4 6 8 digits = 31 46 63 radix = 2 2 2 range = 9 13 18 huge = 2147483647 70368744177663 9223372036854775807 bit_size = 32 46 46 REAL half Default,single double KIND ...

... every new catalog of objects has to be contained in the UNIX directory having the same name as the catalog of objects; . ... the programs for local operations (programs of low level) with the catalog of objects are also in the same directory; . brief characteristics and names of the programs and file with the description of the catalog are stored in the file cats_descr ; . ... All astronomical catalogs have a different format and list different observables. ...

... For a full description and explanation of the parameters, see the ; manual for the ODI shell for DOS, which ships with the NetWare package ; or is available from Novell part # 100-000871-001. ... PORT 200 ; SLOT 3 ; ; The next few lines specify the frame type. ... FRAME ETHERNET_802.3 PROTOCOL IPX 0 ETHERNET_802.3 (binds IPX protocol to frame) ; ; ; This is the driver default ; ; FRAME ETHERNET_802.2 ; PROTOCOL IPX 0 ETHERNET_802.2 ; ; ; ; %VER NET.CFG - sample Netware DOS ODI configuration file V3...

SITE 2010 Comprehensive Characterization of Astronomical Sites Kislovodsk, Russia, 49 October 2010 Conference Summary Marc S. Sarazin*a a European Southern Observatory, Garching, Germany Abstract The main topics discussed during the Site 2010 conference are outlined and the outcome is described. Keywords: Astronomical Site testing, precipitable water vapor, atmospheric turbulence, cloudiness, seeing 1. ... Site surveys for National observatory projects in China, India, and Iran benefit from this. ...

... FTP access the basic models is here . ... Below, we put short descriptions of the used SED models for the photometric redshifts providing by the current server . ... The uniqueness of this model consists in expanding to the near IR (NIR) of Rocca-Volmerange and Guiderdoni's (1988) atlas of synthetic spectra with a revised stellar library, which includes parameters of cool stars. ... Homepage of the GISSEL model). ... Another model used earlier is the model of synthetic spectra of Poggianti (1997). ...

... Second, the observatory can control the configuration, test data analysis procedures, and provide calibration solutions with the help of instrument models. This paper presents the VLT object-oriented framework for the development of ETCs (Exposure Time Calculators) and data simulators. ... Instrument simulations are being developed for the purpose of predictive calibration, instrument configuration control, and evaluation of data analysis procedures. ...

Stellarium 0.12.3 . ... FileљStructure . ... SphericalRegion . DrawParams . ... SphericalRegion::DrawParams Struct Reference . Parameters specifying how to draw a SphericalRegion . More... #include < StelSphereGeometry.hpp > . DrawParams (class StelProjector *projector) . Construct DrawParams with default parameters and specified projector. ... Do not subdivide the region to follow projection distortions. ... class StelProjector * SphericalRegion::DrawParams::projector_ . ...

Orbital data : INTERBALL AZ GSE and GSM cartesian coordinates, GSE cartesian velocity (once per 10 minutes). ... Magnetic field data from IMAP experiment. Magnetic fileld absolute value and magnetic field index (the difference between absolute value and model value), status flag. ... Counts of H+ and O+ ions are accumulated during one spin period by detectors D6 (antisunward looking), D8 (spin plane), D10 (sunward looking) of TRICS2 subsystem (1.0-30 keV). ... TRICS1, TRICS2, TRICS3 subsystems: . ...

... xntpd is an operating system daemon which sets and maintains the system time-of-day in synchronism with Internet standard time servers. xntpd is a complete implementation of the Network Time Protocol (NTP) version 3, as defined by RFC-1305, but also retains compatibility with version 1 and 2 servers as defined by RFC- 1059 and RFC-1119, respectively. xntpd does all computations in 64-bit fixed point arithmetic and requires no floating point support. ... Specify the name and path of the log file. ...

AUTOMATIC STATION OF ECOLOGICAL CONTROL . ... STATE OF ASEC DEVELOPMENT . ... ASEC . ... Warranted life-time of balloons and calibration mixed gases, months . ... Telemetry system supplying information from each station to ecological center on technical state of gas analyzing equipment and instruments, emergency situations and unauthorized opening of the station. available . ... Calibration mixed gasses are stored inside the balloons as part of ASEC. ... Official WEB-site of S.P.Korolev RSC Energia . ...

... Average resolution at altitude H=668 km . ... Swath width at H=668 km and inclination of beginning of swath 20.48 degrees . ... Resolution at H=668 км . ... Наименование параметра . ... 1 канале . ... Полоса обзора при H=668 км . ... 1-5 спектральной зоне, не более . ... 1 спектральной зоне . 0,48-0,52 мкм . ... 0,915-0,997 мкм . ... 1-4 канал . ... 1-4 каналов . ... Спектральные характеристики каналов (по уровню 0,5): . ... For more information send a mail to: info@sputnik.infospace.ru . ...

... Field size . Object name . ... Map size . ... Field size: the approximate size of the map in the Y direction. ... Galaxies: . ... Galaxies, which size exceeds some value depending on the field and map sizes, are displayed with their real positional angles and sizes by 25m isophote. ... In the "tools" fields there are links to the several famous AVO (Astrophysical Virtual Observatory) resources: NED and Simbad databases and DSS2 (Palomar Digitized Sky Survey) images of the corresponding sky area. ...

This document contains a summary of the user interface for filtering rows in binary tables. Table filtering allows a program to select rows from an table (e.g., X-ray event list) by checking each row against one or more expressions involving the columns in the table. When a table is filtered, only valid rows satisfying these expressions are passed through for processing. ... select rows whose pha value is exactly 10 . ... 10 pha select rows whose pha value is in the range of 10 to 50 . ...