... HST Phase II Proposal Instructions for Cycle 20 > Chapter 10: Fine Guidance Sensors (FGS) > 10.1 Introduction to the FGS . ... The Instrument Configurations and Operating Modes described in the following section are used for the Visit and Exposure Specifications. ... Note that many of the Optional Parameters have default values; in such cases, an Optional Parameter entry in the Visit and Exposure Specifications is necessary only if it is desired to override the default value . ... FGS . ...

... A file upload element on an HTML form. ... JavaScript 1.1: added type property . ... The HTML INPUT tag, with "file" as the value of the TYPE attribute. For a given form, the JavaScript runtime engine creates appropriate FileUpload objects and puts these objects in the elements array of the corresponding Form object. ... form . ... For all FileUpload objects, the value of the type property is "file" . ... Use the value property to obtain the file name that the user typed into a FileUpload object. ...

... This is done by taking in all input files the extension whose name is specified by the maintable parameter (called 'merged extension' in what follows) and merging the columns into a single output extension of the same name. ... Its contents is taken from the CCDID keyword (and QUADRANT for EPIC PN). ... To propagate other column specific keywords, they must be specified manually via the extensionchecks , mainattributes , maxattributes and minattributes parameters (see above). ...

... The instrument modes and arms should be indicated and described, and the keywords that distinguish between different modes should be indicated (usually INS.MODE is used if it is a mode and OCS keys are used in case it is related to an arm). ... Raw frames The format of the raw frames for each mode and arm should be described. ... The design should be checked on pre-processing or processing, which involves products only (no trigger via raw frames). ... QC parameters. ...

... CentralProcessor 0.11 documentation . ... The Central Processor Manager is the local monitoring and control agent for the Central Processor sub-system. ... At the moment the Central Processor Manager only controls the acquisition phase; that is, it only controls the ingest pipeline. ... In addition to the CP manager specific parameters, any parameters that begin with ice_properties are passed directly to the ICE Communicator during initialisation. ... string . ... Central Processor Manager . ...

Stellarium 0.12.3 . ... Classes . ... ClassљList . ... Static Public Member Functions . CLIProcessor Class Reference . ... argsGetOption (const QStringList &argList, QString shortOpt, QString longOpt) . Check if a QStringList has a CLI-style option in it (before the first ). ... Retrieve the argument to an option from a QStringList. ... Check if a QStringList has a yes/no CLI-style option in it, and find out the argument to that parameter. ... a long-form option string, e.g. "–help" . ...

There are six possible ways of object description: . a) by number(s) . ... d) by list . e) by orbital elements . ... They should be introduced as year, month, day with tenth (e.g. 20021104.1). d) Computations are performed for all objects listed in the file whose path and name should be introduced into assigned data field. ... On pressing Edit file button user has a possibility to look through the list of object elements or their coordinates and velocities to add or to change it. ...

Next: Summary of reduction Up: Echelle Reduction Previous: Saving the Data . In the present version we will be concerned with the standard configuration of CASPEC, the Cassegrain Echelle Spectrograph which is in operation at the Cassegrain focus of the ESO 3.6 m telescope. ... In its standard configuration CASPEC uses a a 31.6 lines/mm echelle grating together with a 300 lines/mm grating cross disperser. ... The table shows the change in resolution with the order number. Table: Resolution . ...

... The file names' construction . The flight (m) stage's file set . ... the orbital data used for the flight operation monthly (m) long-term planning, . ... The orbital calculations are based on the initial orbital data determined by KIAM RAN using the orbital radio- measurement treatment. The determined initial orbital data are presented as a state vector (satellite position and velocity) in the J2000 reference. ... Accept the file with extension '.bgr', where the Moscow time (MT=UT+3h) is used. ...

... Most HTML elements are identified in a document as a start tag, which gives the element name and attributes, followed by the content, followed by the end tag. ... To identify the document as being HTML 3.0, it is recommended that documents start with the prologue: <!doctype HTML public "-//W3O//DTD W3 HTML 3.0//EN"> . ... HTML 3.0 documents formally have the following structure: <HTML> <HEAD> head elements .. ... HTML> . ... The permitted syntax of HTML 3.0 compliant documents is specified by the...

... Average resolution at altitude H=668 km . ... Swath width at H=668 km and inclination of beginning of swath 20.48 degrees . ... Resolution at H=668 км . ... Наименование параметра . ... 1 канале . ... Полоса обзора при H=668 км . ... 1-5 спектральной зоне, не более . ... 1 спектральной зоне . 0,48-0,52 мкм . ... 0,915-0,997 мкм . ... 1-4 канал . ... 1-4 каналов . ... Спектральные характеристики каналов (по уровню 0,5): . ... For more information send a mail to: info@sputnik.infospace.ru . ...

Next: *.imh and *.qp Extensions Up: IRAF/PROS Files Previous: IRAF Image Arrays . The x-ray data are stored in QPOE files (Quick Position-Ordered Events, *.qp ) rather than image arrays. ... Note that, unlike IRAF images, QPOE files have no associated header file, and are always stored in the current directory, unless explicitly specified otherwise. Non-PROS IRAF tasks can also access QPOE data files in place of image arrays. ... rp110590.qp[pi=2:30] . ... The ROSAT PSPC qp file images are . ...

... SGML . The text/html content type . In this section, we begin the specification of HTML 4.0, starting with the contract between authors, documents, users, and user agents. ... These recommendations are not normative and conformance with this specification does not depend on their realization. ... An HTML document is an SGML document that meets the constraints of this specification. ... A user is a person who interacts with a user agent to view, hear, or otherwise use a rendered HTML document. ...

hstpolsim -- Produce simulated polarization input data frames for HST instruments . ... inint = "" [name] . ... Name of the HST instrument for which simulated polarization images are to be produced. ... Name of the instrument specific polarizing filter for simulated images (ignored for SPECIAL instrument). filtname = "" [name] . Name of the instrument specific colour filter for simulated images. ... The header parameter FILTER provides the filter name and POLANG the polarizer angle. ...

... CREATE FULLTEXT CONFIGURATION -- create full-text configuration . CREATE FULLTEXT CONFIGURATION cfgname PARSER prsname [ LOCALE localename ] [ AS DEFAULT ]; CREATE FULLTEXT CONFIGURATION cfgname [ { PARSER prsname | ... PARSER . ... LOCALE . ... Create new configuration test with default parser and ru_RU.UTF-8 locale. CREATE FULLTEXT CONFIGURATION test PARSER default LOCALE 'ru_RU.UTF-8'; =# \dF+ test Configuration "public.test" Parser name: "pg_catalog.default" Locale: 'ru_RU.UTF-8' Token | ...

TH setINDI 1 .SH NAME setINDI \- set one or more writable INDI property values .SH SYNOPSIS \fBsetINDI [options] device.property.e1[;e2...]=v1[;v2...] ... \fP .SH DESCRIPTION .na .nh .PP setINDI connects to an indiserver and sends commands to set new values for specified properties. ... TP -p <p> connect using alternate port p; the default is 7624. ... SH EXIT STATUS The setINDI program exits with a status of 0 if it suceeded in setting the new value for each specified property. ...

... Description . ... The SCORPIO-2 project: . ... The multi-mode spectrograph SCORPIO-2 was developed using the experience of observations at the 6-m telescope BTA with the SCORPIO focal reducer . ... The focal reducer consists of several units ('floors') mounted in the common case in the following order (from the telescope focal plane): . ... The focal reducer is connected with the platform-adapter which used for guiding by offset stars and for illumination the spectrograph by calibration lamps. ...

... Field size . Object name . ... Map size . ... Field size: the approximate size of the map in the Y direction. ... Galaxies: . ... Galaxies, which size exceeds some value depending on the field and map sizes, are displayed with their real positional angles and sizes by 25m isophote. ... In the "tools" fields there are links to the several famous AVO (Astrophysical Virtual Observatory) resources: NED and Simbad databases and DSS2 (Palomar Digitized Sky Survey) images of the corresponding sky area. ...

Main Page Data Structures File List Data Fields Globals . Array element. More... #include < exchange.h > . char . ... diameter . double . ... Corresponds to one row of an OI_ARRAY FITS table. char _element::tel_name[17] . char _element::sta_name[17] . int _element::sta_index . float _element::diameter . double _element::staxyz[3] . The documentation for this struct was generated from the following file: . exchange.h . ...

Pulkovo NEO Page . ... EPOS Software Package . ... EPOS ( E phemeris P rogram for O bjects of the S olar system) is the Windows PC application for study and ephemeris support of observations of the Solar system objects. ... It controls the part of common data and transfers the control to one of the programs that solve the restricted set of tasks. ... So with the EPOS software package one can calculate the accurate ephemerides for many objects and get the quick illustration of their motion as well. ...