... Chapter 8: Pointings and Patterns > 8.3 How to Fill Out the Pattern Parameters Form . ... In this case, instead of taking the exposures at each point of the first pattern, the entire Sub-Pattern (or Secondary_Pattern in the Text Proposal File ) will be executed at each point, creating a two-dimensional matrix of pointing offsets. ... Pattern_Type: STIS-MAMA-BOX . ... Pattern parameters that are determined by the pattern type, or have default values, need not (or cannot) be changed in the form. ...

... This is done by taking in all input files the extension whose name is specified by the maintable parameter (called 'merged extension' in what follows) and merging the columns into a single output extension of the same name. ... Its contents is taken from the CCDID keyword (and QUADRANT for EPIC PN). ... To propagate other column specific keywords, they must be specified manually via the extensionchecks , mainattributes , maxattributes and minattributes parameters (see above). ...

Tasks in GIPSY are the application programs which do useful work for the user. ... To start a task without parameters, only the name of the task needs to be supplied. taskname To specify parameters, any number of keyword-value pairs separated by blanks can be added to the taskname: taskname keyword1 = value1 keyword2 = value2 .. ... The user can set a parameter in the task context to change requests for hidden keywords into requests for defaulted keywords. ... Tasks all run in a context . ...

... All the parameters provided in this database have been obtained using the the MIRIAD ( Sault et al. 1995 ) task MBSPECT . MBSPECT makes a spectrum of the velocity (or frequency) axis of a cube. The spectrum is beam-weighted, over the width specified, for the other image axes. ... Robust parameters are calculated by using an algorithm which minimises the mean absolute deviation of the flux-weighted velocities. mask= This specifies the x-axis ranges to be excluded from any continuum fit. ...

Next: *.imh and *.qp Extensions Up: IRAF/PROS Files Previous: IRAF Image Arrays . The x-ray data are stored in QPOE files (Quick Position-Ordered Events, *.qp ) rather than image arrays. ... Note that, unlike IRAF images, QPOE files have no associated header file, and are always stored in the current directory, unless explicitly specified otherwise. Non-PROS IRAF tasks can also access QPOE data files in place of image arrays. ... rp110590.qp[pi=2:30] . ... The ROSAT PSPC qp file images are . ...

... SphereParams Struct Reference . ... SphereParams (const float radius) . ... Definition at line 50 of file StelGeometryBuilder.hpp . ... Definition at line 103 of file StelGeometryBuilder.hpp . ... Definition at line 120 of file StelGeometryBuilder.hpp . ... Definition at line 112 of file StelGeometryBuilder.hpp . ... Definition at line 118 of file StelGeometryBuilder.hpp . ... Definition at line 110 of file StelGeometryBuilder.hpp . ... Definition at line 114 of file StelGeometryBuilder.hpp . ...

NAME ABbuilder - DFO data organization tool SYNOPSIS ABbuilder <options> where <options> are: --raw-dir directory containing raw data --cal-dir directory containing calib data --cal-ldir directory containing symbolic links to calib files --cal-list mcalib list --vcal-dir directory containing virtual products --pro-dir where pipeline products are created --ab-dir where association blocks are created --oca-rul file containing OCA rules --instrume instrument --date YYYY-MM-DD --mode { CALIB | ...

Next: External Functions Up: Fitting of Data Previous: The Corrected Gauss--Newton . ... Basic functions are either defined in the system or defined by the user as external FORTRAN routines. ... Basic functions are specified by the name, the independent variable(s) and parameter(s), with optional guesses for the parameters, following the syntax: name(var1[, ];par1[, ]) [par1=value] . ... Parameters are defined by unique names after the semicolon in the function specification. ...

... Previous: Background Fluctuation Analysis from the Multiscale Entropy . ... A new measure of information is defined which is based on noise modeling and incorporates resolution scale. Properties of this measure are discussed. ... Additionally it allows for image noise modeling, and subsequent noise removal. ... Hence information- and entropy-based processing technologies will be necessary for the effective design and implementation of large, future generation, image databases. ...

... Let us first find out which way -- rise in spectral resolution with some loss in the S/N ratio or increase in the S/N ratio with a fixed spectral resolution -- is better for the purpose of reduction of equivalent width determination errors. ... N -- number of counts for 1 ? ... line equivalent width, . ... Thus if the spectral resolution is managed to be increased (i.e. to decrease )without loss in the number of counts falling at 1 ?, the equivalent width measurement error is then proportional to . ...

... This function can also be used for particular types of subtypes or kinds: KIND (0) integer KIND (0.0) floating point number KIND (.FALSE.) logical variable KIND ("A") string of characters There is an intrinsic function SELECTED_REAL_KIND , which returns the kind of the type REAL that has a representation with (at least) the precision and the exponential range requested. ... With the choice SELECTED_INT_KIND (5) all integers between (but not including the limits) -100 000 and +100 000 are permitted. ...

makeprfcorr -- Compute the pixel response function for an image created with asncombine makeprfcorr association . association . ... Interactive program to compute relative shifts of images in an association file. ... After computing the relative shifts of the direct images, alignasn searches for corresponding grism images for each of the direct images. ... The grism association is then updated with the same relative shift measurements as determined from the direct images. ...

I have dropped the differentiation of HTML into a sequence of conformance levels. ... This (and upward compatible specifications) define the Internet Media Type (RFC 1590) and MIME Content Type (RFC 1521) called "text/html". The type "text/html" accepts the following parameters: . ... Character sets . The charset parameter (as defined in section 7.1.1 of RFC 1521) may be used with the text/html content type to specify the encoding used to represent the HTML document as a sequence of bytes. ...

... The variability of the spectrum of the optical component of the IR-source IRAS01005+7910 was discovered for the first time in the BTA spectra [1]. ... The spectral features include absorptions that form in near-photospheric layers, narrow envelope emissions, and emission-absorption profiles that form in photosphere-to-envelope transition layers (the wind). ... Discovery of spectral variation in the optical counterpart of IRAS01005+7910. ... Dashed line - envelope curve of all the SiII 5979 profiles ...

... JavaScript 1.1: added current, next, and previous properties. ... To change a window's current URL without generating a history entry, you can use the Location.replace method. ... For example, if the history list contains three named entries, these entries are reflected as history[0] , history[1] , and history[2] . ... back . ... onClick="history.go('home.netscape.com')"> The following button navigates to the URL that is three entries backward in the history list: <P><INPUT TYPE="button" VALUE="Go" ...

... CYLINDRICAL PROJECTIONS: -Jc lon0 / lat0 / scale (Cassini) -Jj lon0 / scale (Miller) -Jm scale ( Mercator - Greenwich and Equator as origin) -Jm lon0 / lat0 / scale ( Mercator - Give meridian and standard parallel) -Joa lon0 / lat0 / azimuth / scale (Oblique Mercator - point and azimuth) -Job lon0 / lat0 / lon1 / lat1 / scale (Oblique Mercator - two points) -Joc lon0 / Je lon0 / lat0 / scale (Equidistant). Jf lon0 / lat0 / horizon / scale (Gnomonic). ...

... Average resolution at altitude H=668 km . ... Swath width at H=668 km and inclination of beginning of swath 20.48 degrees . ... Resolution at H=668 км . ... Наименование параметра . ... 1 канале . ... Полоса обзора при H=668 км . ... 1-5 спектральной зоне, не более . ... 1 спектральной зоне . 0,48-0,52 мкм . ... 0,915-0,997 мкм . ... 1-4 канал . ... 1-4 каналов . ... Спектральные характеристики каналов (по уровню 0,5): . ... For more information send a mail to: info@sputnik.infospace.ru . ...

... SFIT is a general-purpose code designed to optimize theoretical stellar spectra to an observed spectrum. ... While the programme expects input from "stdio", it is more natural to save commands in a file (eg "sfit_input") and run the code simply by . ... If the spectra to be fitted have a filename "star_spectrum", then the best fit spectrum will be written out, together with the renormalized input spectrum, to a file called "star_spectrum.fit". ... sets up model spectrum grid (and for 2nd star) . ...

ERS -1,2 SAR . ... SIR-C/X SAR . ... European Remote Sensing Satellite (ERS-1) was launched on 17 July 1991, and the follow mission ERS-2 (with the same sensors and an Ozone monitoring instrument added) was launched on 21 April 1995. ... The Spaceborne Imaging Radar-C/X-band Synthetic Radar (SIR-C/X-SAR), carried in the cargo bay of the Space Shuttle Endeavour in April and October of 1994, simultaneously recorded SAR data at three wavelengths (L-, C-, and X-bands; 23.5, 5.8, and 3.1 cm, respectively). ...

... 18-Jan-2010 17:22 . ... Apache/2.2.3 (CentOS) Server at www.wdcb.ru Port 80 ...