Astronet Поиск по астрономическим сайтам English Russian
       
        Точная форма слов   О проекте   Сайты   Справка
Найдено документов: 330651 (180 сайтов) ---- Время поиска: 0.88сек.   

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | След.

Показаны документы, содержащие фрагменты текста из документа
http://www.stecf.org/software/IRAFtools/stecf-iraf/adass99/P2-21/node7.html.

1. IRAF/STECF imaging linear polarimetry simulation and reduction package
... The STECF IRAF layered package impol provides five tasks specifically aimed at reduction of HST imaging polarimetry data for ACS, FOC, NICMOS and WFPC2. ... Reduction of HST polarimetry data and simulation of raw polarimetry images, together with polarization vector plotting, are covered. ... hstpolsim -- Produce simulated polarization input data frames for HST instruments from images of the total signal, the linear polarization and the position angle of the polarization vectors. ...
[ Сохраненная копия ]  Ссылки http://www.eso.org/~jwalsh/softpol/ -- 8.2 Кб -- 02.02.2001
Похожие документы

2. ST-ECF IRAF package
... Several HST instruments both current and decommisioned have provided imaging linear polarimetry capabilities. ... The STECF IRAF layered package impol provides five tasks specifically aimed at reduction of HST imaging polarimetry data. ... Reduction of HST polarimetry data and simulation of raw polarimetry images, together with polarization vector plotting, are covered. ... For reduction of data from imaging linear polarization instruments other than from HST, the instrument name is `SPECIAL'. ...
[ Сохраненная копия ]  Ссылки http://www.stecf.org/software/IRAFtools/stecf-iraf/impol/ -- 10.3 Кб -- 09.04.2016
Похожие документы

3. The ``stecf'' IRAF Layered Package
... We have collected together many of the astronomical applications developed as IRAF tasks at the Space Telescope European Coordinating Facility (ST-ECF) into a new IRAF layered package called ``stecf''. ... For many years the ST-ECF has developed IRAF tasks and packages for HST and related data analysis. ... The impol package consists of five tasks to reduce, simulate and plot imaging linear polarimetry data taken with the HST instruments with polarizing facilities - currently FOC, NICMOS and WFPC2. ...
[ Сохраненная копия ]  Ссылки http://www.adass.org/adass/proceedings/adass99/P2-21/ -- 14.1 Кб -- 11.10.2000
Похожие документы

4. STIS Instrument Handbook
STIS Instrument Handbook for Cycle 24 . ... Space Telescope Imaging Spectrograph Instrument Handbook for Cycle 24 > Chapter 12: Special Uses of STIS > 12.1 Slitless First-Order Spectroscopy . ... Slitless First-Order Spectroscopy . ... The use of a long slit ensures a clean separation of emission lines arising from different spatial features. ... Figure 4.8 shows an image of SN1987A observed using the 52X2 aperture, and as the source is smaller than the slit, this is effectively a slitless image. ...
[ Сохраненная копия ]  Ссылки http://www.stsci.edu/hst/stis/design/documents/handbooks/currentIHB/c12_special02.html -- 15.0 Кб -- 12.04.2016
Похожие документы

5. The 2175? feature
... Laboratory and theoretical modelling of the UV bump on the interstellar extinction curve is a very popular topic in dusty investigations. ... feature is illustrated by Fig. 10 where the profiles were calculated using the model of graphite spheres. Figure 10: Normalized extinction efficiencies for graphite spheres. ... The lower panel shows the summary extinction of two graphite spheres with radii and (from upper panel) taken in equal proportions. ...
[ Сохраненная копия ]  Ссылки http://www.astro.spbu.ru/DOP/8-GLIB/ASTNOTES/node4.html -- 13.3 Кб -- 19.11.2010
Похожие документы

6. Keyin Free-format Input
... Input via keyin format is of the form keyword = value . ... The input keywords are not case sensitive. Most of the values required by SCHED, except for file names in case sensitive systems like unix, are also not case sensitive. keywords are, in all cases, limited to 8 characters in length. ... Keyin values can be mathematical statements in parenthesis; for example, dur = 15 rep = (4*5) This example shows the most likely way in which this capability might be used in SCHED input files. ...
[ Сохраненная копия ]  Ссылки http://www.atnf.csiro.au/people/Tasso.Tzioumis/sched/Keyin_Free_format_Input.html -- 8.9 Кб -- 10.04.2016
Похожие документы

7. What was measured?
... An OBJECT column gives the name of the object observed (usually a star name). ... In critical cases, it is common practice to measure sky on two or more positions around a target object, and these positions must be identified. ... A general treatment of this problem requires a column called OBJECT, bearing the usual name of the object (as in the star tables); a column labelled STARSKY, to distinguish between star+sky, star alone, or sky alone; and additional columns to identify the sky position. ...
[ Сохраненная копия ]  Ссылки http://www.sao.ru/precise/Midas_doc/doc/94NOV/vol2/node637.html -- 8.1 Кб -- 23.02.1996
Похожие документы

8. SSL/TLS Strong Encryption: How-To - Apache HTTP Server
... Apache HTTP Server Version 2.4 . Apache > HTTP Server > Documentation > Version 2.4 > SSL/TLS . ... Client Authentication and Access Control . ... How can I create an SSL server which accepts strong encryption only? How can I create an SSL server which accepts all types of ciphers in general, but requires a strong cipher for access to a particular URL? ... How can I allow only clients who have certificates to access a particular URL, but allow all clients to access the rest of the server? ...
[ Сохраненная копия ]  Ссылки http://www.arcetri.astro.it/manual/fr/ssl/ssl_howto.html -- 16.5 Кб -- 19.11.2015
Похожие документы

9. Ivan's contribution to GMT 3.2
I would like to propose two new features for the axes annotation in the GMT. 1st: In astrophysics, we often work with great ranges of values (many orders of magnitude). ... However, GMT 3.2 allows to plot annotations for log10 axes every integer log10 value or even more frequently. The proposed patch allows to specify large steps for the log10 axes, in the form illustrated by an example below. 2nd: 10^0 instead of 1, and 10^1 instead of simply 10 do not look beautiful. ... The patch is here. ...
[ Сохраненная копия ]  Ссылки http://xray.sai.msu.ru/~ivan/gmt/patch/ -- 2.4 Кб -- 10.06.1999
Похожие документы
Еще в разделе: (Показать все результаты (>607) - xray.sai.msu.ru/ )

10. Meade Instruments Corporation - Pictor Manual Part 3
... Meade Instruments Corporation . ... Section 3: File Menu . ... Displays the dialog to open an existing image: . ... Saves the current image as a new file name or new file type, or both. ... This can be useful to prevent having 20 or more images open at once, and saves having to close them manually. ... This is done by creating a text file with the same name as the image file. ... Note that Image Information is saved within the FITS file, so there will not be a text file to accompany these files. ...
[ Сохраненная копия ]  Ссылки http://www.meade.com/manuals/pictor/pictor3.html -- 13.0 Кб -- 01.02.2006
Похожие документы

11. Sensors
... European Remote Sensing Satellite (ERS-1) was launched on 17 July 1991, and the follow mission ERS-2 (with the same sensors and an Ozone monitoring instrument added) was launched on 21 April 1995. ... ERS-2 has a fixed repeat cycle of 35 days, and follows ERS-1 tracks with one day's delay. ... Swath width is 102.5 km (telemetered), spatial resolution is about 25x25 m. The Advanced SAR (ASAR) instrument is carried by ESA's ENVISAT satellite launched on 1 March 2002. ... Swath . ... Spatial Resolution...
[ Сохраненная копия ]  Ссылки http://www.iki.rssi.ru/simp/sensors.html -- 8.2 Кб -- 25.02.2007
Похожие документы

12. QPOE Files
Next: *.imh and *.qp Extensions Up: IRAF/PROS Files Previous: IRAF Image Arrays . The x-ray data are stored in QPOE files (Quick Position-Ordered Events, *.qp ) rather than image arrays. ... Note that, unlike IRAF images, QPOE files have no associated header file, and are always stored in the current directory, unless explicitly specified otherwise. Non-PROS IRAF tasks can also access QPOE data files in place of image arrays. ... rp110590.qp[pi=2:30] . ... The ROSAT PSPC qp file images are . ...
[ Сохраненная копия ]  Ссылки http://hea-www.harvard.edu/PROS/PUG/node15.html -- 11.5 Кб -- 01.10.2012
Похожие документы

13. http://xmm.vilspa.esa.es/sas/7.0.0/doc/omatt.ps.gz
XMM-Newton Science Analysis System Page: 1 omatt June 28, 2006 Abstract Convert a source list from OM detector to sky coordinates, and produce a sky coordinate OM OSW image 1 Instruments/Modes Instrument Mode OM FAST OM IMAGING 2 Use pipeline processing yes interactive analysis yes 3 Description This task takes an OM OSW source list, with source positions in pixels, and converts to sky coordinates. ... The task requires the user to enter the name of an OSW source list and its corresponding OSW image. ...
[ Текст ]  Ссылки http://xmm.vilspa.esa.es/sas/7.0.0/doc/omatt.ps.gz -- 50.6 Кб -- 28.06.2006
Похожие документы

14. VISTA - Visible and Infrared Survey Telescope for Astronomy
... Exposure Time Calculator (ETC) . Survey processing . ... VISTA is a 4-m class wide field survey telescope for the southern hemisphere, equipped with a near infrared camera (1.65 degree diameter field of view at VISTA's nominal pixel size) containing 67 million pixels of mean size 0.34 arcsec and available broad band filters at Z,Y,J,H,K s and a narrow band filter at 1.18 micron. A wide field visible camera, if constructed, could also be used on VISTA. ... Tile . ... ESO VISTA Public Surveys . ...
[ Сохраненная копия ]  Ссылки http://www.vista.ac.uk/ -- 31.7 Кб -- 27.11.2014
Похожие документы
Еще в разделе: (Показать все результаты (>17) - www.vista.ac.uk/ )

15. Untitled1
MSSSO Annual Report 1997 . ... The Duffield Heliostat was designed and constructed for the Stromlo Exploratory, and forms the central feature within the building. It produces a stationary, high-quality image of the sun, which is one of the major exhibits in the Exploratory, and was installed in time for the opening ceremony on July 26, 1997(Fig. ... The tracker module of the Heliostat is located at the top of the pier in the central area of the building, under a roll-off roof. ...
[ Сохраненная копия ]  Ссылки http://www.mso.anu.edu.au/annualReport/1997/08_instruments.html -- 10.7 Кб -- 02.10.2012
Похожие документы

16. The Human Orrery
Next: Library, Archive and Historic Up: Buildings, Grounds, Library and Previous: Disposal of the Schmidt . Mark Bailey, Apostolos Christou and David Asher have developed ideas for a new outdoor exhibit in the Observatory grounds, called `The Human Orrery'. ... The position of the proposed new Library, Archive and Historic Scientific Instruments building is shown in outline. ... Next: Library, Archive and Historic Up: Buildings, Grounds, Library and Previous: Disposal of the Schmidt M.E. Bailey . ...
[ Сохраненная копия ]  Ссылки http://star.arm.ac.uk/annrep/annrep2003/node84.html -- 9.5 Кб -- 18.05.2004
Похожие документы

17. Zen: pg80-pr-en
Hide Zen home . ... November/December 2004 - The PostgreSQL Global Development group has released version 8.0 of the PostgreSQL object-relational database management system, building on its position as the most advanced open source database in the world. This release includes features previously only available in the most expensive proprietary database systems, and is expected to substantially increase the adoption of PostgreSQL by both users and software vendors. ... New features include: . ...
[ Сохраненная копия ]  Ссылки http://www.sai.msu.su/~megera/oddmuse/index.cgi/pg80-pr-en -- 11.1 Кб -- 11.04.2016
Похожие документы

18. Bus Hound
... Bus Hound may be the very first product of its kind -- a software bus analyzer for capturing device I/O and protocol. ... When the capture buffer fills to capacity, Bus Hound can be configured to stop the capture process or continue capturing, keeping the most recent acquired data. ... IDE : Bus Hound captures command and data transfers for ATA and ATAPI devices. ... B us Hound captures I/O using a device driver. ... The below figure demonstrates how Bus Hound captures data for SCSI devices. ...
[ Сохраненная копия ]  Ссылки http://mavr.sao.ru/hq/sts/othe/bushou/details.htm -- 14.0 Кб -- 24.02.2010
[ Сохраненная копия ]  Ссылки http://www.sao.ru/hq/sts/othe/bushou/details.htm -- 14.0 Кб -- 24.02.2010
[ Сохраненная копия ]  Ссылки http://jet.sao.ru/hq/sts/othe/bushou/details.htm -- 14.0 Кб -- 24.02.2010
Похожие документы

19. AstroImageJ (AIJ) - ImageJ for Astronomy
... AstroImageJ (AIJ) .. ... Reads and writes FITS images with standard headers . ... Provides a time and coordinate converter tool with capability to update/enhance FITS header content (AIRMASS, BJD, etc.) ... Creates color images and with native ImageJ processing power . ... AstroImageJ_Updater . Update operation now updates AIJ version number in Info.plist CFBundleVersion and CFBundleShortVersionString (MacOSX only) . ... AstroImageJ is ImageJ with astronomy plugins and macros installed. ...
[ Сохраненная копия ]  Ссылки http://www.astro.louisville.edu/software/astroimagej/ -- 6.2 Кб -- 01.02.2016
Похожие документы
Еще в разделе: (Показать все результаты (>949) - www.astro.louisville.edu/ )

20. Procedure to Install the 2.5m Secondary Truss
... Procedure . ... Wind Baffle Pendant Control, located in the 2.5m enclosure. Spreader Bar for wind baffle counterweights, located behind the Machine shop. ... Wind baffle frame tied to eyebolt in floor. ... Move the inner white wind baffle counterweight from the temporary mounting blocks at the front of the wind baffle frame to the standard location at the back. ... Rig the secondary truss to the overhead crane using a large shackle and 4 long nylon straps (load capacity of 1000 Lb. each). ...
[ Сохраненная копия ]  Ссылки http://www.apo.nmsu.edu/Telescopes/SDSS/25Procedures/Telescope/op020303instM2truss.shtml -- 10.2 Кб -- 22.03.2002
Похожие документы

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | След.


Астронет | Научная сеть | ГАИШ МГУ | Поиск по МГУ | О проекте | Авторам

Комментарии, вопросы? Пишите: info@astronet.ru или сюда

Rambler's Top100 RFBR Яндекс цитирования