... NICS will be the only infrared instrument for the first light of the TNG; as a consequence, we decided to incorporate a sufficient degree of operation flexibility by providing the instrument with six different observing modes, three aimed at imaging and three at spectroscopy: . ... It will be possible to use the narrow band filters as order sorters; this will allow to perform high resolution long-slit spectroscopy in the wavelength ranges covered by the available narrow band filters. ...

... ARC 3.5m | Instrument Summary . ... ARCES (Echelle) : the ARC Echelle spectrograph, a high resolution (R~31,500) echelle spectrograph that observes the entire wavelength range from 3200 е to 10000 in a single image on a 2048x2048 CCD. This instrument is permanently mounted at the NA1 port. ... In addition to the facility instruments, several visitor instruments have been used at the 3.5m, and some of these are available to the ARC observing community by contacting the instrument PIs: . ...

At Arecibo we have a variety of optical instruments that we use to study terrestrial airglow emissions. ... As a complement to the airglow instrumentation we also maintain a set of optical instruments, called lidars, used for "active" remote sensing of the atmosphere. That is, we generate our own source signal using lasers and measure the characteristics of the light scattered back from the atmosphere. ... An operations manual for the Optical Laboratories is currently under major revision. ...

... Instrument Status . Science Verification . ... CRIRES . ... SV observer shall submit their proposals using the Science Verification proposal template Proposers are asked to provide at least a short summary of the science goal, coordinates and magnitudes of GS and science target, a finding chart , the observing wavelength ID, as specified in appendix A of the UM and DIT, NDIT settings of science detectors as computed with the exposure time calculator (see below). ... with a 0.2 arcsec slit. ...

... Series 4000 filters thread into the barrels of virtually all 1.25" eyepiece brands. Meade Series 4000 filters are a large 26mm in clear aperture and are manufactured from the purest crown optical glass, dyed-in-the-mass ( not "color coated"); there are no finer filters available for telescopic applications. ... For visual applications Series 4000 filters thread into the barrels of all Meade 1.25" eyepieces, and into the barrels of virtually all other 1.25" eyepiece brands as well. ... Meade 4M | ...

... Special problems arise with filters intended to measure red leaks in blue and ultraviolet filters. ... The column named REDLEAK contains an 8-character string that specifies the treatment of red leaks in short-wavelength filters. Possible values are 'MEASURED' if the red leak is measured by observations through a filter that isolates the leak; 'BLOCKED' if a copper-sulfate or other blocking filter is used; or 'IGNORED' if the leak is neither measured nor blocked. ...

... Previous: Background Fluctuation Analysis from the Multiscale Entropy . ... A new measure of information is defined which is based on noise modeling and incorporates resolution scale. Properties of this measure are discussed. ... Additionally it allows for image noise modeling, and subsequent noise removal. ... Hence information- and entropy-based processing technologies will be necessary for the effective design and implementation of large, future generation, image databases. ...

... Main page . ... Grisms . ... Long-slit . ... Back to SAO web page . ... This page is designed by A.V. Moiseev . ... The SCORPIO-2 project: . Spectral Camera with Optical Reducer for Photometric and Interferometric Observations - 2 . The low-resolution long slit spectral observations are posible with any available grisms . The slit width is 6 arcmin. The slit width is changeable in the range 0.5 - 22 arcsec ...