Next: File Formats Required Up: OPTOPUS Commands and Previous: Optopus commands . Below follows a description of all parameters that can be set by the SET/OPTOPUS command, the commands which use these parameters and the default values. ... If an OPTOPUS command the default value is not used the command will, in addition to actual OPTOPUS operation, also overwrite the setting of this parameter and hence will change the default value. ... set the equinox . ... Table: Command parameters . ...

... The e-mail interface of the CATS is designed like CGI for the call of the basic procedures: select and match from the html-forms and the program is a lexical analyser, distinguishing keywords and parameters from the electronic letter sent to the address `cats@sao.ru'. ... The output of result is forseen in the same formats as in other forms of the access to the CATS. ... out[put] < arg1 arg2... > . ... ra [ < arg1 > ] < arg2 > < arg3 > ... min max [center] . ... window < arg1 arg2 ... > . ...

... CentralProcessor 0.11 documentation . Utilities . The CASDA upload utility prepares artifacts for submission to the CSIRO ASKAP Science Data Archive (CASDA). ... Evaluation Pipeline Artifacts (any file format) . ... The measurement set is a directory, where CASDA requires a single file per artifact . ... The following example declares four artifacts to be uploaded to CASDA, one for each of the artifact types: image, source catalogue, measurement set and evaluation report. ...

Next: Program use Up: Description of program searchdup Previous: Description of program searchdup . Parameter input is done with a graphic user interface. ... Input file: Name of the input catalog file. It has to be formatted, one record per source/observation, according to the format used in the Arcetri observations and source archives. ... Minimum number of observations per source Source with less than this number of independent observations are not included in the output file . ...

The Wideband Arecibo Pulsar Processor - File Format Page . WAPP files have three sections that appear sequentially in this order: an ASCII header description, the binary header, and finally the actual binary data. ... The WAPP realtime observation engine does not produce files larger that 2 Gbytes. At one time this represented a fundamental limit to Linux files. ... Each file will have it's own header, even when the files are simply continuations of a single observation. ... long int . ...

... This tool is designed to create formatted and unformatted file-by-file reports from fits headers, or fits files. fitsreport reads from a configuration file all the keys to be displayed: . ... retrieve non-FITS information (file name, path name). ... The tool reads all fits files in the given path, evaluates the configuration file fitsreport_raw.cfg (to be in ${DFO_CONFIG_DIR}) and dumps the output into out. ... This is more evident in the other config file, fitsreport_raw.cfg. ...

... Meta Index / Home Page / Description . ... This can be set by the user via the parameter device . The default value of device is /XS (Xserver), but alternative outputs (depending on what drivers have been installed with PGPLOT) can be used, for example /XW for x-windows, /GIF, /JPEG, /PS for Postscript, and /CPS for Colour Postscript. ... Either a colour-coded image or a contour map image can be produced, depending on the value of imagestyle . ... Note that 0 is not a valid colour map index. ...

... GPI Data Pipeline 1.0 documentation . GPI Data Pipeline User?s Guide . ... Appendix: Recipe File XML Format . ... We describe here the XML file format adopted for this. This file format is based on and extremely similar to, but not exactly identical with, the format of Keck OSIRIS data reduction files (?DRFs?) ... In general, an XML document is a simple ASCII file composed of markup tags. ... To add a comment to an xml file surround the text in a <!? and a ?> such as in this example:: . ...

lte-codes . Sterne . ... In 2006, Behara and Jeffery introduced a new file format for the model atmospheres produced by STERNE and used by SPECTRUM and SFIT. ... allow depth-dependent descriptions of composition, and . ... model.lambda_ref <lambda ref > . ... abundance < elem > < abund > . ... structure.abundance < elem > : ( needs N depth ) . ab elem,1 , ab elem,2 , ..., ab elem,Ndepth > . ... structure.tau_ref : ( needs N depth ) . ... structure.opac_ref : ( needs N depth ) . ...

The initial orbital data are distributed in the F1 format, which contains orbital elements as a the state vector (the spacecraft position and velocity vector) in the inertial frame (Standard reference of the Earths Equator and Equinox J2000). ... The Format number . 0001 . The Message number . ... 00001 . ... 001451.596 . ... 008276.384 . ... 000000.000 . ... The F1 format for this data looks as follows: . INT/ITZ/01/0001/01/00001/ . ... 001451.596/-008276.384/+000000.000/ . ...

Orbital data : INTERBALL AZ GSE and GSM cartesian coordinates, GSE cartesian velocity (once per 10 minutes). ... Magnetic field data from IMAP experiment. Magnetic fileld absolute value and magnetic field index (the difference between absolute value and model value), status flag. ... Counts of H+ and O+ ions are accumulated during one spin period by detectors D6 (antisunward looking), D8 (spin plane), D10 (sunward looking) of TRICS2 subsystem (1.0-30 keV). ... TRICS1, TRICS2, TRICS3 subsystems: . ...

... Packet Format . ... The TCC broadcasts UDP packets containing position information. ... Packet Header . ... int4 . ... double . ... pos, vel double . ... pos, vel, time double . ... See the TCC Message Keywords Dictionary for full definitions of most items in the "data" section of the packet. pos, vel double is a structure containing two doubles: "pos" and "vel"; it contains the same information as the TCC's "coordinates" (p,v,t triplets), but with time given by the "TAIDate" entry in the packet. ...

Next: DETAILED LIST OF ROSAT Up: PROS USERS GUIDE Previous: List of Related Documents . This section lists all PROS tasks (some of which are not described in this guide) and some useful IRAF tasks which are included. ... converts FITS to images and/or tables . ... delete a list of images . ... convert an Einstein FITS file into an IRAF/PROS QPOE file . ... convert a list of IRAF/PROS IMAGE files into RDF compatible format . ... convert a list of IRAF/PROS QPOE files into RDF compatible format . ...

Stellarium 0.12.3 . ... Classes . ... AngleSpinBox Class Reference . A spin box for displaying/entering angular values. More... #include < AngleSpinBox.hpp > . ... virtual void  . ... Set the value to default 0 angle. ... AngleSpinBox (QWidget *parent=0, DisplayFormat format= DMSSymbols , PrefixType prefix= Normal ) . ... Set the display format. ... the value to set, in decimal degrees. void AngleSpinBox::setDisplayFormat . ... the value to set, in radians. void AngleSpinBox::valueChanged . ...

hstpolsim -- Produce simulated polarization input data frames for HST instruments . ... inint = "" [name] . ... Name of the HST instrument for which simulated polarization images are to be produced. ... Name of the instrument specific polarizing filter for simulated images (ignored for SPECIAL instrument). filtname = "" [name] . Name of the instrument specific colour filter for simulated images. ... The header parameter FILTER provides the filter name and POLANG the polarizer angle. ...

... The general-purpose data reduction package FIGARO is now available to be run from the IRAF CL, and more Starlink applications will follow in due course. ... A system has been developed to enable packages written for the Starlink Software Environment to be run from the IRAF CL so that an IRAF user can mix and match application tasks from the two environments as required to process data, all under the control of the IRAF CL. ... Mixing IRAF and Starlink Applications ґ FIGARO under IRAF 3. ...

... Once "point" is read, assumes all the following x,y coordinates are points. ... Program asc2dxf c reads set of x,y coordinates and writes a .dxf file for aperture plate. character*4 xop1,xop2 character*12 outfile 1 format ( 1h0 /7hSECTION/1h2/8hENTITIES/ 1h0 ) 2 format (6hCIRCLE/1h8/1h1/2h62/1h3) 3 format (4hLINE/1h8/1h1/2h62/1h3) 4 format (5hPOINT/1h8/1h1/2h62/1h3) 5 format (2h10/5h43.00/2h20/5h43.00/2h30/5h0.000/2h40/5h43.00/ 1h0 ) 6 format (2h10,/,f6.3,/,2h20,/,f6.3,/,2h30/5h0.000) 7 ...

grd2xyz - Converting a grdfile to an ASCII or binary table grd2xyz grdfile [ -H [ nrec ] ] [ -R west / east / south / north [ r ] [ -S ] [ -Z [ flags ] ] [ -bo [ s ] ] grd2xyz reads a binary 2-D grdfile and writes out xyz-triplets in ASCII [or binary] format to standard output. Modify the precision of the ASCII output format by editing the D_FORMAT parameter in your .gmtdefaults file, or choose binary output using single or double precision storage. ... Ignored if binary output is selected. ...

The database contains references to the papers, data files and links to the Internet resources related to measurements and calculations of the optical constants in the wavelength interval from X-rays to radio domain. ... References to some useful books and reviews on the subject (e.g. the classical handbooks edited by E.D.Palik) and links to Internet collections of optical constants and personal WWW pages with related software were also placed in the database. You have arrived at our welcome page. ...

... xntpd is an operating system daemon which sets and maintains the system time-of-day in synchronism with Internet standard time servers. xntpd is a complete implementation of the Network Time Protocol (NTP) version 3, as defined by RFC-1305, but also retains compatibility with version 1 and 2 servers as defined by RFC- 1059 and RFC-1119, respectively. xntpd does all computations in 64-bit fixed point arithmetic and requires no floating point support. ... Specify the name and path of the log file. ...