... true false . A boolean switch determining whether the list of to be considered HK parameters shall be explicitly specified with parameter parameters . ... blank separated list of HK parameter names . ... If set to true overrideparameters must contain a list of HK parameter names and overrideparametervalues a corresponding list of validity ranges for those parameters (see below). overrideparameters . ... If withoverrideparameters is set to true the list must contain valid HK parameter names. ...

HI line flux (flux corresponding to the area under the 21-cm line profile) is generally expressed in converted in magnitude m21 according to the formula adopted in RC3: m21 = -2.5 log f + 17.40 where f is the area of the 21-cm line profile expressed in Jy*km/s (the constant is 16.6 if the flux is in 10**-22 W/m**2). Non-detections (or upper limits) are not stored in the database, therefore galaxies with no HI measurements available may either be too faint or not have been observed. ... HyperLeda . ...

Next: Program use Up: Description of program searchdup Previous: Description of program searchdup . Parameter input is done with a graphic user interface. ... Input file: Name of the input catalog file. It has to be formatted, one record per source/observation, according to the format used in the Arcetri observations and source archives. ... Minimum number of observations per source Source with less than this number of independent observations are not included in the output file . ...

... User Guide ] Task: imdiff Purpose: Shift and expand an image to make it match another. ... No default. Key: in2 The second input image. ... Key: adjust This gives the name of an output image data-set, being a version of second image after adjustment. ... The following five parameters give the initial estimates for the various parameters that IMDIFF is trying to find. ... Key: expand This gives the initial expansion. ... Key: offset This gives the initial dc offset to apply to IN2. ...

Next: Parameters of the starburst Up: The Model Previous: Initial parameters of compact . ... If the rate of accretion from one star to another is sufficiently high (e.g., the mass transfer occurs on a timescale a few times shorter than the thermal Kelvin-Helmholz time for the normal companion) or the compact object is engulfed by a giant companion, the common envelope (CE) stage of the binary evolution can set in (see Paczynski 1976; van den Heuvel 1983). ...

... Fitting the observed dependence includes calculations of the polarization cross-sections averaged over particles orientation and size distribution, their normalization and the comparison of obtained dependencies with Serkowski's curve representing observational data for a chosen star. ... Variations of the polarization factors with wavelength are shown in Fig. 16 for homogeneous spheroidal particles with PF orientation. ... The distinction between prolate and oblate spheroids is also clearly seen. ...

Irregular phenomena in the Earth Pole oscillation process and temporal variations of geopotential Valery Bondarenko, Vadim Perepelkin s The observed irregular phenomena in the Earth Pole oscillation process are very variety. ... These phenomena indicated in the IERS data are the "abnormal" fluctuation of the Earth Pole coordinates which owing to changing of the geodynamical parameters gives negative result in interpolation and forecast of the first approximation mathematical model. ... Fig. ...

In this chapter we will consider an example of visual expert system written on the Actor Prolog language. ... There are a lot of methods of oil field bed stimulation that increase output of the oil production: thermal, physical-chemical, gas, microbiological, and others. ... Fig. ... The Top-Most diagram consists of three blocks: the "Describe parameters of hydrocarbon field" block, the "Check adaptability of existed methods of oil production" block, and the "Display solution" block. ... Gas methods. ...

. Intervals of available data are coded by blue color. To read availability charts user should know the descriptor ("name") of the KP subset of interest. Table annotations include also number of version for each subset. Plot resolution is exactly one pixel per hour. Data are considered as available if at least one data point is present during that hour.

Next: Simulated Results with Up: Assessment of Methods Used Previous: Introduction . ... Then one has to use regularized inversion methods in order to obtain approximate and sensible solutions. ... All these methods contain a free parameter which is the so-called regularization parameter; in the case of method ( ) this is a smoothing of the higher spatial frequencies; for the methods ( ) - ( ), it is the number of iterations. ... In the case of method ( ) the iteration scheme is given by . ...

... Matrix of Transformation | ... Every set of attitude coefficients (corresponding to a line in attitude data file) is valid for its own time interval and gives the possibility to get a matrix N of tranformation from the GSE coordinate system to the S/C coordinate system as well as a matrix M of tranformation from the S/C coordinate system to the GSE coordinate system. ... and the matrix M of transformation from the S/C to the GSE systems (the direction cosines matrix) is: . ... V GSE = M * V S/C . ...

... We demonstrate through numerical simulations that model parameters estimated with our technique are essentially bias-free, even when the average number of counts per bin is 1. ... The IW technique avoids such biases by estimating through successive iterations, where for each iteration, j, , and the best-fit parameters are determined by minimization of . ... In our sample, we find that the minimum values and best-fit parameters converge after about 6 iterations. ...

... Correlation between ratio of peak fluxes of flare microwave bursts at 8.8 and 15.4 GHz (parameter S 9 /S 15 ) and spectral index of solar proton fluxes (parameter ?= lg (J 10 /J 100 ) calculated by measurements near the Earth in the >10 MeV and >100 MeV channels. ... The following events are marked by numbers (numeration according to Main Table): 41 - 14.07.2000, 43 - 12.09.2000, 59 - 26.12.2001, 63 - 15.07.2002, 81 - 20.01.2005. ...

... The operators will be explained as they are used. The general notion to keep in mind is that any combination of these operators results in a 2- D affine coordinate transformation in the TF plane, which may be represented using the homogeneous coordinates often used in computer graphicsfoley. ... S _t_c,f_c = g_t_c,f_c,(_t) | ... We denote a time shift to the position , with an operator that has a multiplicative law of composition : (Table 1). ... Note that these two operators do not commute. ...

Arecibo Upgrade Notes INSTRUMENTAL POLARIZATION : POLARIZATION ISOLATION ERRORS IN STOKES PARAMETERS Jim Cordes Joe Lazio 22 May 1996 Summary The purpose of this memo is to: 1 demonstrate how polarization isolation is related to errors in Stokes parameters ; 2 estimate a tolerable level of errors in Stokes parameters due to amplitude and ... There we had a level of cross coupling that gave about 10 errors in Stokes parameters. ...

... Heracles Triplane and Aerospace Systems . The key characteristics of two-stage aerospace systems are determined according to speed and carrying capacity of the aircraft-carrier used . ... So the SPIRAL system hypersonic carrier was expected to launch the second stage by weight 63 tons at a speed corresponding to 6M; whereas launching weight of the MAKS system orbital stage with the use of the An-225 MRIYA heavy subsonic aircraft reaches 275 tons, and the HERACLES aircraft - 450 tons. ...

... Parameters of the Moon-perturbed orbit . ... From orbits consistent with this limitation and with the date of the launch October 1, 2000 as an example, an orbit was selected with apogee directed to the North Galactic pole at the begining and rotation of orbit plane was maximized. The initial state vector is given in the inertial coordinate system in epoch J2000.0. ... The orbit has initial perigee radius Rp=7000.0 km, initial apogee radius Ra=343000.0 km and initial period T=8.453 days. ...

... 8, ``Celestial Mechanics'', 2002 Investigation of stability of NEAs orbital resonance motions by numerical methods L. E. Bykova Tomsk State University, Tomsk, Russia The problem of orbital stability of resonance Near­Earth asteroids (NEAs) is considered. Most of NEAs have multiple close approaches to the inner ma­ jor planets. ... The technique of the investigation of NEAs orbital stability has been devel­ oped by author on the basis of the construction of possible motion domains (R) of asteroids. ...

polimplot -- Plot a polarization vector map . ... inpol = "" [name] . Input linear polarization image (in %) to plot. inpopa = "" [name] . Input image for position angle of linear polarization vectors (degrees). poi_err = "" [boolean] . ... Name of corresponding polarization position angle error image (degrees). ... This task is a flexible tool for plotting a polarization vector map from two images of the polarization and the position angle of the polarization vector. ...

polimplot -- Plot a polarization vector map . ... inpol = "" [name] . Input linear polarization image (in %) to plot. inpopa = "" [name] . Input image for position angle of linear polarization vectors (degrees). poi_err = "" [boolean] . ... Name of corresponding polarization position angle error image (degrees). ... This task is a flexible tool for plotting a polarization vector map from two images of the polarization and the position angle of the polarization vector. ...