Next: Feed Polarisation Up: Calibration Previous: Calibration Index . RPFITS files do not contain any information as to whether the telescope calibration was in units of Kelvin or Janskys. On reading the data a default value is set depending on the telescope and frequency of observation. ... ASAP>scans = scantable('2004-11-23_1841-P484.rpf', unit='Jy') # Or in two steps ASAP>scans = scantable('2004-11-23_1841-P484.rpf') ASAP>scans.set_fluxunit('Jy') . ...

... This effect is visible in Figure 4.3 which shows a logarithmic stretch of the image resulting from a 100s exposure on a star of V magnitude 2.6 through filter F502N in the PC. Extreme overexposure of the Loral CCDs is not believed to cause any permanent effects, and therefore the WFPC2 does not have a bright object limit. ... Several other artifacts that are common in saturated stellar images are also obvious in Figure 4.3 . ... Figure 4.3: Saturated Stellar Image Showing Horizontal Smearing. ...

... The task accepts two sources lists: the observation source list and the exposure source list. ... List of selected sources. This le contains a table, called SRCLIST, with the following columns: Name Type Description SRC NUM Integer Source ID from observation source list RA Double RA from exposure source list DEC Double Declination from expoure source list RATE Real Count rate from observation source list COUNTS Real Number of source counts, from exposure source ...

Next: Data reduction Up: Spectral observations and data Previous: SAO 6m observations . Further follow-up spectroscopy was made during nights May 30 - June 4, 1995, using the Boller & Chivens spectrograph attached to the Cassegrain focus of the Calar Alto 2.2m telescope. ... The observations were complemented by standard star flux measurements, lamp exposures for wavelength calibration, dome flats, bias and dark frames. ...

... Science Users Information > Observing with ESO Telescopes > Phase 2 Preparation > Observing conditions . ... Service Mode Philosophy . ... The following definitions of the observing conditions are common between Phase 1 preparation and Phase 2 preparation, as well as between Service Mode and Visitor Mode observations. ... There are additional Service Mode Policies and Service Mode Guidelines regarding the observing conditions. ... Seeing (Phase 1) and Image quality (Phase2) constraints . ... Moon . ...

... The J, H and K bands are characterized by a bright background, such a background is mainly due to the emission of atmospheric lines and of thermal radiation. ... If the source cover a large fraction of the slit, spectra off-source must be observed to adequately sample the sky background. ... The on chip integration time (time spent in each position of the slit) must not exceed 40 seconds in J and H bands and 60 seconds in K band. ... We suggest a sequence of 10 for each elementary integration time. ...

... Copyrightї1997 Bob Yen (byen@ix.netcom.com) (http://www.comet-track.com/hb/hb.html) . ... Information on Comet Hale-Bopp for the Non-Astronomer Hale-Bopp rotates about twice a day (3/14/97) . ... The Comet Observation Home Page was been selected to receive the Griffith Observatory Star Award for the week of February 2 - 8, 1997 for excellence in promoting astronomy to the public through the World Wide Web. ... Typically, about 1,000 individual users/computers access this page every day. ...

In this gallery are many images of Low Surface Brightness Galaxies which have recently been discovered and analyzed. ... The central surface brightness of this galaxy is 24.28 . Malin 2 This galaxy is another huge disk galaxy with a scale length of 15 kpc and a redshift of 15000 km/a. The high surface brightness knot in one of its spiral arms actually has the same color, luminosity and H-alpha equivalent width as the entire Large Magellanic Cloud . ... Truly it is a Low Surface Brightness Galaxy. ...