This note outlines how to configure the computers needed to run DIMMWIT. ... dimmwit : ICE (single-board computer in a box) that runs the Starlight Express CCD camera, to which it is connected by a USB interface. dimmwithost : displays the finder application via the X protocol (finder actually runs on dimmwit). Acts as a file server; both the finder software and the DIMM data are stored on dimmwithost. ... mkdir -p /data/oberon/data/finder . chown coast:coast /data/oberon/data/finder . ...

... GPI Data Pipeline 1.0 documentation . ... Frequently Asked Questions . ... When trying to start the pipeline, I get the error ?xterm: Can?t execvp idl: No such file or directory? ... Credits for the GPI Pipeline Software Development . ... You can either (1) change your $PATH to include the directory with idl, (2) put a symlink pointing to idl in some directory already in your path, or (3) edit your local copy of the gpi-pipeline script to explicitly set the full path to the idl executable. ...

The Network Time Protocol (NTP) is used to synchronize the time of a computer client or server to another server or reference time source, such as a radio or satellite receiver or modem. ... Information on the NTP architecture, protocol and algorithms can be found in the following articles and reports, which are available online . Mills, D.L. Internet time synchronization: the Network Time Protocol. ... Mills, D.L. Network Time Protocol (Version 3) specification, implementation and analysis. ...

Next: The /dev directory Up: The root filesystem Previous: The root filesystem . The /etc љ directory contains a lot of files. ... See the chapter on init љ for further information. /etc/passwd љ . ... Lists the filesystems mounted automatically at startup by the mount -a command (in /etc/rc љ or equivalent startup file). ... etc/issue љ . ... See the magic љ and file љ manual pages for more information. /etc/motd љ . ... Files executed at login or startup time by the Bourne or C shells. ...

... Requests for Comments (RFCs) – это набор документов выпущенных Internet Engineering Task Force (IETF) из Network Information Center (NIC), которые представляют новые протоколы и устанавливаемые стандарты для стека протоколов Интернет Каждый такой документ определяет аспект относительно протокола Интернет. Ниже мы перечислили все RFC, которые имеют отношение к этой книге и различному программному обеспечению описанному в ней. ... User Datagram Protocol (UDP). ... Internet Protocol (IP). ...

... If You Have Neither OS/2 Dual Boot Nor OS/2 Boot Manager -------------------------------------------------------- If you want to remove OS/2 from your computer but want to save the data on your hard disk first, carry out the following procedure: To remove OS/2 and save the data on your computer: 1. ... Back up the data files you want to keep onto floppy disks by using the COPY command. ... Reinsert Setup Disk 1 in drive A (the startup drive). ... Restart your computer by pressing CTRL+ALT+DEL. ...

... Directives | ... Apache HTTP Server Version 2.2 . Apache > HTTP Server > Documentation > Version 2.2 > Programs . ... httpd is the Apache HyperText Transfer Protocol (HTTP) server program. ... Process the configuration directive before reading config files. -c directive . Process the configuration directive after reading config files. ... Questions on how to manage the Apache HTTP Server should be directed at either our IRC channel, #httpd, on Freenode, or sent to our mailing lists . ...

Next: Running CONSTRICTOR Up: How to use CONSTRICTOR Previous: Parameters Contents . ... OutputBeam.BiasMod(07:12) = 1, 7, 10, 8, 3, 5 OutputBeam.StationID(01:04) = 1, 3, 4, 6 OutputBeam.StationID(05:08) = 1, 2, 4, 5 OutputBeam.Wavelength (01:04) = 849.4e-9, 820.9e-9, 793.9e-9, 768.3e-9 OutputBeam.Wavelength (05:08) = 744.2e-9, 722.9e-9, 701.5e-9, 683.1e-9 OutputBeam.Wavelength (09:12) = 664.6e-9, 648.9e-9, 617.7e-9, 603.5e-9 OutputBeam.Wavelength (13:16) = 590.7e-9, 577.9e-9, 566.5e-9, 556.6e-9 ...

... You will connect to the server ( telescope ) computer with a command such as the one described below: ssh -L 7624 :localhost: 7624 user@remoteserver On a high speed local area network if you also want to transport X you may connect with ssh -Y -L 7624 :localhost: 7624 user@remoteserver Configure SSH without passwords =============================== On the computer you are connecting from ... Server Port =========== The XmCCD camera controller runs as an INDI device. ...

TUI will look in two separate "TUIAdditions" directories for user scripts and extra TUI window code. ... Scripts should be put in a directory named Scripts in the TUIAdditions directory; they will then show up immediately in the Scripts menu (you do not have to restart TUI).. ... In general, additions present in the user TUIAdditions directory mask identically named additions in the shared TUIAdditions directory, and both mask identically named built-in scripts and windows. ...

Next: MIDAS And the Up: Monitor and Command Previous: Monitor and Command . ... the MIDAS working directory for internal files and (optionally) private procedures: . ... On a Unix system use the option -m < mid_work > to change the default working directory, and -p or -P to run MIDAS in parallel mode љ when you start MIDAS via the command inmidas (see below). ... In NOPARALLEL mode all intermediate MIDAS files in the MIDAS startup directory are deleted when starting MIDAS via inmidas. ...