... Ц 2003 Cummins Power Generation Specifications May Change Without Notice S-1422a (3/03) Specifications Network ® Echelon L ONW ORKS ® ,Twisted-Pair 78KBPS, FT-10 Power Voltage Current Temperature Operating Storage Humidity Relative 5 - 36 VDC, 120 VAC 1.25 A (max) -25 to +70 °C (-13 to +158 °F) -25 to +85 °C (-13 to +185 °F) 25 - 95% (non-condensing) Protocol Echelon LonW orks, GOAL Inputs 3-Phase Voltage 3-Phase Current 32 Discrete 10 Analog 0 - 600 ...

... Ham packet radio system including: . ... control computer RSC 2. dedicated software monitoring generation of probing pulses in onboard transceiver in radio beacon mode; . ground receiving network of ham radio packet communication to record probing pulses of onboard radio beacon; . ... Generation of onboard radio beacon probing pulses as time marks to ground receiving network (including ham radio receivers of USW) and transmission of the measurement results throughout Internet network. ...

... VLBI Schedule . ... Observers Wiki . ... Other VLBI . ... Go to new wiki . ... Main / . Use the official Parkes vnc sessions on joffrey:1 and joffrey:2. Run cdisko and DAS in joffrey:2. ... ssh vlbi@pkvsi1 then das1 . ... 21cm/1.4 GHz . ... where SETUP is the name of the correct session setup file, e.g 2011Mar_HOHa.cmd). ... This file should be copied to Epping and put in the vlbi ftp area /pub/people/vlbi/cal/parkes/logs with the name MonthYear , using a 3 letter abbreviation for the month. ...

The first character in each record (line) of formatted output defines a carriage control character to the lineprinter, often called ASA-character, for a previous name of the US Standardization Organization ANSI. ... When using VAX/VMS for output first on a file, which is to be printed later on paper, it is advisable to use the extension .DAT . ... You use the compiler switch -vms f77 -vms prog.f and get the control characters removed from the screen output. ...

The primary goal of the Cycle 4 calibration plan was to provide an instrument calibration for Cycle 4 GO and GTO science programs as well as monitor internal health, photometric and optical stability of the instrument. ... Table 8.4: Summary of Cycle 4 Calibration Plans . ... Flats . ... Earth Flats . ... The internal flat fields are intended as delta-flats, in order to monitor the stability for the main photometric filter set as well as provide data for the generation of high S/N flat fields. ...

TOOLS OF TEST GENERATION FOR SATELLITES CONTROL PROGRAMS Andrey Tyugashev, Ekaterina Myasnikova, Elena Sopchenko S.P. Korolyov Samara State Aerospace University (National Reseach University) The paper presents a research in the field of test automation for testing spacecraft control programs. ... Programmers or designers of spacecraft systems write tests manually. ... Tests are carried out by issuing the control actions on the spacecraft and condition monitoring systems parameters of the spacecraft. ...

... We are developing the following problems: a) combine optical and microwave technic to the indication of non-linear surface waves and wave breaking field; b) modelling of microwave propagation in a multiphase air-water interface; c) obtain quantitative dependencies of microwave radiation on geometry and statistics of wave breaking field in ocean surface; d) monitoring of ocean surface states using optical amd microwave airspace data sets. ... Important issue is spray and underwater bubbles. ...

... List of SAS threads This thread illustrates you how to reprocess Observation Data Files (ODF) to obtain calibrated and concatenated event lists, which can be directly used to generated scientific products (images, spectra, light curves) through evselect or xmmselect . ... run the EPIC reduction meta-tasks. ... emproc For the pn: . ... emproc selectinstruments=yes emos1=yes . ... Concatenated and calibrated EPIC event lists are already available in the PPS Pipeline Products . ...

Next: Navigation Pre-Observation Products . ... SRT (Space Radio Telescope) Schedule (SRS) File . ... What: GOCG generates the Space Radio Telescope (SRT) schedule file, or SRS file, from current GSTS file. The SRS file has more precise time stamps than long-term schedules, and also designates which GTS will be used when. ... The SRS file also serves as the antenna pointing schedule file, as it describes the planned orientation of the spacecraft (and solar panels) as a function of time. ...

... Statistic files are managed using file generation sets and scripts in the ./scripts directory of this distribution. ... Each valid update appends a line of the following form to the current element of a file generation set named peerstats : . ... This keyword allows the (otherwise constant) filegen filename prefix to be modified for file generation sets, which is useful for handling statistics logs. filegen name [ file filename ] [ type typename ] [ flag flagval ] [ link | ...

... Seek help from APO hub specialists before moving to the instrument. the exposure sequence are working is a good sign that everything is talking), but the results are files filled with 0's. Array power needs to be powered in software using: tcamera arrayPower state= on or tspec arrayPower state= on 3) General error guidance: If the errors are coming from tspec or tcamera (not tcam) then there may be troubles in the instrument : --------------------------Guider ( ...