... Configuring AGP . ... There are several choices for configuring the NVIDIA kernel module's use of AGP on Linux. You can choose to either use the NVIDIA builtin AGP driver (NvAGP), or the AGP driver that comes with the Linux kernel (AGPGART). ... To use the Linux 2.6 AGPGART driver, both the AGPGART frontend module, apggart.ko , and the backend module for your AGP chipset ( nvidia-agp.ko , intel-agp.ko , via-agp.ko , ...) need to be statically linked into the kernel, or built as modules and loaded. ...

... From the top-level of the Apache source tree, type: cd support [ENTER] . ... From support/suexec.h /* * HTTPD_USER -- Define as the username under which Apache normally * runs. ... See the suEXEC documentation for more detailed * information. */ #define USERDIR_SUFFIX "public_html" /* * LOG_EXEC -- Define this as a filename if you want all suEXEC * transactions and errors logged for auditing and * debugging purposes. */ #define LOG_EXEC "/usr/local/apache/logs/cgi.log" /* Need me? ...

... CentralProcessor 0.11 documentation . ... The Central Processor Manager is the local monitoring and control agent for the Central Processor sub-system. ... At the moment the Central Processor Manager only controls the acquisition phase; that is, it only controls the ingest pipeline. ... In addition to the CP manager specific parameters, any parameters that begin with ice_properties are passed directly to the ICE Communicator during initialisation. ... string . ... Central Processor Manager . ...

... The syntax of the rtftohtml command is as follows: rtftohtml [-i] [-o filename] [-P extension] [-T] [-G][file] . ... Indicates that imbedded graphics
should be linked into the main document using an IMG tag. ... Use "extension" as the extension for any links to graphics files. ... If standard input is used, the body of the document will be written to standard output (unless overridden by the -o option.) If a file name appears, the output is written to "filename" with ".html" as an extension. ...

... From: Terry Moore < tmoore@solbrn.dseg.ti.com > . I need to write a driver using inb() and outb(). I am struggling with compiling a simple test program to test these fuctions. ... If I use gcc -o -DMODULE -D__KERNEL__ -c myfile.c I do not understand how to use the resulting file created -DMODULE. ... If I use gcc -o tst tst.c the following fail appears. undefined reference to __inbc undefeined reference to __inb . What I expected was a executable program to run from the command line. ...

This note outlines how to configure the computers needed to run DIMMWIT. ... dimmwit : ICE (single-board computer in a box) that runs the Starlight Express CCD camera, to which it is connected by a USB interface. dimmwithost : displays the finder application via the X protocol (finder actually runs on dimmwit). Acts as a file server; both the finder software and the DIMM data are stored on dimmwithost. ... mkdir -p /data/oberon/data/finder . chown coast:coast /data/oberon/data/finder . ...

... LWN.net FAQ . ... This article is part of the LWN Porting Drivers to 2.6 series . The longstanding task queue interface was removed in 2.5.41; in its place is a new "workqueue" mechanism. ... Tasks to be run out of a workqueue need to be packaged in a struct work_struct structure. ... INIT_WORK must be used at least once before queueing the work_struct structure, but should not be used if the work_struct might already be in a workqueue. ... Driver porting: the workqueue interface. ...

lsst.mirrorCtrl љ 1.0.13 . ... mirrorCtrl: Interface to Galil mirror controllers . ... This package adds the following capabilities to the Galil mirror controllers: Command mirror orientation (piston, tilt and translation) to the extent supported by the actuators. The Galil supports commanding actuator mount, not orientation.) ... The controller has a model of where the actuators, encoders and fixed links are attached to the mirror (at one end) and to the stationary frame (at the other end). ...

README for XFree86 on OS/2 : Checking Compatibility of Video Hardware . ... Edit your CONFIG.SYS file to contain the following line somewhere: DEVICE=Y:\XFree86\lib\xf86sup.sys Of course replace ``Y:'' with the correct drive letter. ... Refer to section Adding Variables to CONFIG.SYS below. ... Start a full screen OS/2 CMD session and enter the following command: [C:\] Y:\XFree86\bin\SuperProbe . ... SuperProbe can identify many more video cards than are supported by XFree86. ...