... S-Low Receiver . ... back to top] . ... Here is a recommended internal memo on this subject : Main Beam and First Sidelobe Parameters for Arecibo's Receiver Systems by C. Heiles et al (5MB PS file ) . ... Receiver History: Used regularly by wide-band pulsar observers. ... Technical Info: To find out the technical details about this receiver, just click on the appropriate icon at the top of the Receiver tabel (Only internally available -- please contact the POC for anything specific). [back to top] ....

... The analysis of NICMOS polarization images is aimed at determining the Stokes' Parameters, and from those the polarization angle and degree for each pixel. NICMOS Camera 1 and Camera 2 each contain three polarizers, whose principal axes of transmission are separated by 120 degrees. ... The images in the three filters need to be compared, in order to produce the Stokes' parameters. ... The Stokes parameters can then be combined to yield the polarized intensity, I p: . ...

... The results are used in quasireal time by the observing process, but also as input by hardware quality control, by the dynamical scheduler, and by the Science Pipeline. Among processing operations are the calibration of the atmospheric absorption, of phase radiometric correction, of pointing scans, of phase and amplitude reference measurements, .. ... Using the last few measurements, we will determine a provisional amplitude calibration curve (to be also used by the Quick Look pipeline). ...

... Basic Observables: Zero-differenced phase and code ionosphere-free combinations of global GNSS network stations, corrected by P1-C1 satellite code biases (cc2noncc), daily observations with 30 seconds sampling rate Sites coordinates : IGb08 reference frame coordinates and velocities Displacements: solid tides, ocean loading, pole tide loading (IERS 2010) Geometric model : Receivers antennas eccentricities, absolute receiver and ...

Next: Setup Files Up: Frequency Catalog Previous: Frequency Catalog Contents . The parameters of the frequency file tell SCHED over what frequency range the group if usable and on which stations. Most of the parameters are the same as parameters in the setup file since they are meant for direct substitution once the correct frequency group has been identified. ... This will be matched against the station name in the setup file. The name VLBA will be a default for all VLBA stations. ...

... Meta Index / Home Page This section documents the parameters recognized by this task (if any). ... boolean . ... false true . If startviewer is set to true imgdisplay attempts to establish a communication link between itself and an active Ds9 / SAOtng process upon invocation. ... If withreceive is set to true output from a running Ds9 / SAOtng process (resulting from a preceding execution of commands via withcommands / commands ) shall be collected in this parameter as a list of strings. ...

... In spite of the good potential possibilities, some of the station "Dnepr" design characteristics did not allow us to apply the usual special IS radar measurement methods. ... Thus for IS signal measurements at the "Dnepr" station, we have developed special methods for recording and processing IS signals in order to determine plasma ionospheric parameters. ... Equations (4-5) from the basis for data post processing to obtain ionosphere parameters. ...

... Flight 1) 2) 3) Flight 1) 2) 3) model FM1 has the following parts: LNA MY-18, serial number PN 01-0252, factory number FM1; receiver box KRT-18, serial number PN 17660-01, factory number FM-001; DC-DC converters IVEP1 and IVEP2, factory number 05. model FM2 has the following parts: LNA MY-18, serial number PN 01-0252, factory number FM2; Receiver box KRT-18 serial number PN 17660-01, factory number FM-002; DC-DC converters IVEP1 and IVEP2 factory number 06. ... See Appendix 1. ... 2003. ... 2004 . ...

Feed cabin Nr. ... Fig. ... This allows to realize the sensitivity at frequency ranges 4.8, 11.2 and 30.0 GHz of 5, 7 and 12 mK by double beam switching mode and by the integration time of the output filter 1s. Input waveguide paths were very long and had big losses. ... The focal line of the feed cabin Nr. ... Data Acquisition and Control System . The Data acquisition system of the feed cabin Nr 2 is based on the new measurement ER-DAS system (Embedded Radiometric Data Acquisition System). ...

Next: Program use Up: Description of program searchdup Previous: Description of program searchdup . Parameter input is done with a graphic user interface. ... Input file: Name of the input catalog file. It has to be formatted, one record per source/observation, according to the format used in the Arcetri observations and source archives. ... Minimum number of observations per source Source with less than this number of independent observations are not included in the output file . ...

... In this context, (or, in the time domain, l ) are no longer independent variables. They are treated like any of the other parameters: i.e. are assumed to be random variables to be estimated from the observations by fitting