... L-Wide . ... Receiver History . ... Available Filters: . ... Use with e.g. filter 5) NOTE 2 1120-1220 3 1230-1470 4 1550-1820 5 1100-1800 6 1360-1470 7 1320 hipass NOTE 8 1180-1280 9 1280 hipass (ext Output unit. ... Consequently, the calibration for data collected using the hipass 1320 and the hipass 1370 filters only will be mis-calibrated (i.e. by using the opposite polarisation calibration data). ... It is now possible to select any bandpass filter that is not in the 1320 hipass band. ...

... It lists the coefficients defining the colour transformations, the zero points for the different filters and the aperture radii used in the photometric calibration analysis. ... The AB system zero point of the filter FilterID is stored in the keyword ABM0 FilterID , e.g. the AB zero point of the the U-filter is stored in ABM0U. The flux conversion factor derived from White Dwarfs of the filter FilterID is stored in the keyword FCF FilterID . ... description . ... AB Flux conversion factor of U . ...

The Parkes 21cm Multibeam Receiver is a new facility available on the Parkes Telescope which is operated by the Australia Telescope National Facility (ATNF), CSIRO. The facility consists of a 13-beam cooled 21cm receiver system, located at the prime focus of the 64m dish. ... Completed 21cm Multibeam Receiver being hoisted up to the Parkes focus cabin. ... It is now available, in 64 MHz mode and in pulsar mode, for normal National Facility use. ... Beam 1 . Beams 2-7 . ... Frequency Range . ...

... The timecode of these receivers is sampled via a STREAMS module in the kernel (The STREAMS module has been designed for use with SUN Systems under SunOS 4.1.x. It can be linked directly into the kernel or loaded via the loadable driver mechanism). ... The reference clock support in xntp contains the necessary configuration tables for those receivers. In addition to supporting up to 32 different clock types and 4 devices, the generation a a PPS signal is also provided as an configuration option. ...

... The first of the equations defines the position of the spectral orders, m , in the raw image, while the second equation gives, for each order, the dispersion relation in one dimension. ... where the coefficients are computed using least squares techniques on a grid , i.e. sample number and line number of points located within the spectral orders of the image. These points in the grid are found automatically by an order--following algorithm, normally using the FLAT or STD image. ...

... Using the Echelle with TUI . Using the Echelle with Remark . ... Configuring TUI to use the Echelle . Setting up the Echelle exposure parameters . ... Focusing the Echelle . ... Changing the echelle guider filters . ... Configuring Remark to use the Echelle . ... Echelle User's Manual . ... The Echelle home page is http://astro.uchicago.edu/echelle . ... Echelle Description . ... Enclosure . ... schematic CAD files . schematic PDF files . ... enclosure wiring schematic . ...

A computer controlled low light photometer for nightglow observations. Hardware units of portable photometer for low light measurements, especially night glow emission is described. ... Interface card contain three channels of 24 bit counter, 4 channels of 12 bit ADC and the buffer bus for the controlled motors of the altazimuthal fork mounting and filters wheel, the position encoders. ... Where N( ) is output signal photometer generated input light flux F( l ) . ... PMT # . 599 . ...

... The analysis and reduction of the STIS flanking fields proceeded in similar fashion as for the imaging of the Main STIS Field. ... The DARK calibration reference file used in the CALSTIS data reduction steps was constructed using a 'delta-dark' image appropriate for the epoch of the flanking field observations. ... DRIZZLE drop-size used for the flanking fields was a "pixfrac" of 0.8. ... For information on the data reduction, please read first the technical information for the Main WFPC2 Field . ...

... There are a lot of computer codes simulating this scattering and freely available in the Internet (see e.g. links on our JPDOC page ). ... The code and input file are available in the directory . ... A slightly modified code of Barber Hill with a C-shell and input files is available in the directory . ... The code, input and test output files are available in the directory . ... See also readme file. file. ... The code, input file and their description (a TeX file) are available in the directory . ...

... 8, ``Celestial Mechanics'', 2002 First results of GPS orbit determination with GRAPE package using a square--root information filter M. O. Keshin Institute of Applied Astronomy, St. Petersburg, Russia The zero--differenced carrier phase measurements contain the distance be­ tween the phase centres of receiver and transmitter antennas biased by unknown integer number of cycles (phase ambiguities). ... In the case of GPS the problem of solar radiation pressure modelling is of primary importance. ...

... Description . ... The SCORPIO-2 project: . ... The multi-mode spectrograph SCORPIO-2 was developed using the experience of observations at the 6-m telescope BTA with the SCORPIO focal reducer . ... The focal reducer consists of several units ('floors') mounted in the common case in the following order (from the telescope focal plane): . ... The focal reducer is connected with the platform-adapter which used for guiding by offset stars and for illumination the spectrograph by calibration lamps. ...

... Directives | ... Apache HTTP Server Version 2.4 . ... ext_filter_module . ... mod_ext_filter directive to define a filter # to HTML-ize text/c files using the external # program /usr/bin/enscript, with the type of # the result set to text/html ExtFilterDefine c-to-html mode= output \ intype=text/c outtype=text/html \ cmd = /usr/bin/enscript --color -W html -Ec -o - - Directory /export/home/trawick/apacheinst/htdocs/c # core directive to cause the new filter to # be run on ...

ESO Phase 3 Data Release Description Please start from this template when preparing the documentation for your ESO Phase 3 data release. ... Finally, the release description will be published as submitted - without further editing by ESO - to support the user community in utilizing the data. ... Please indicate if this is a catalogue data release. ... Data Reduction and Calibration Please address the following questions for scientific catalogue data, particularly in case of source catalogues: . ...

Fortran 90 properties already in CF77 . ... Only the old form (fix form) of the source code is available. ... LOGICAL Default KIND number = 8 INTEGER Default int7 int15 KIND number = 6 1 2 digits = 46 7 15 radix = 2 2 2 range = 13 2 4 huge = 70368744177663 127 32767 bit_size = 46 8 16 INTEGER int31 int46 int64 KIND number = 4 6 8 digits = 31 46 63 radix = 2 2 2 range = 9 13 18 huge = 2147483647 70368744177663 9223372036854775807 bit_size = 32 46 46 REAL half Default,single double KIND ...

This document contains a summary of the user interface for filtering rows in binary tables. Table filtering allows a program to select rows from an table (e.g., X-ray event list) by checking each row against one or more expressions involving the columns in the table. When a table is filtered, only valid rows satisfying these expressions are passed through for processing. ... select rows whose pha value is exactly 10 . ... 10 pha select rows whose pha value is in the range of 10 to 50 . ...

... SFIT is a general-purpose code designed to optimize theoretical stellar spectra to an observed spectrum. ... While the programme expects input from "stdio", it is more natural to save commands in a file (eg "sfit_input") and run the code simply by . ... If the spectra to be fitted have a filename "star_spectrum", then the best fit spectrum will be written out, together with the renormalized input spectrum, to a file called "star_spectrum.fit". ... sets up model spectrum grid (and for 2nd star) . ...

hstpolsim -- Produce simulated polarization input data frames for HST instruments . ... inint = "" [name] . ... Name of the HST instrument for which simulated polarization images are to be produced. ... Name of the instrument specific polarizing filter for simulated images (ignored for SPECIAL instrument). filtname = "" [name] . Name of the instrument specific colour filter for simulated images. ... The header parameter FILTER provides the filter name and POLANG the polarizer angle. ...

... The technology needed to implement a Distributed Astronomical Data Archive (DADA) is available today (e.g., Fullton 1993). Query interface standards are needed, however, before the DADA information will be discoverable. ... These parameters would be used to index each dataset in each catalog. ... The technology is available today to perform cross-catalog queries, to fetch the data at the click of a mouse, quickly to add new observation catalogs, and to distribute the load across multiple machines. ...

Stellarium 0.12.3 . ... FileљStructure . ... TextureParams Struct Reference . Parameters specifying how to construct a texture. More... #include < StelTextureParams.hpp > . ... filtering (const TextureFiltering filtering) . Set texture filtering mode. ... Texture filtering mode. ... Default parameters (no mipmaps, linear filtering, clamp to edge wrap mode). ... TextureParams c = TextureParams ().generateMipmaps() .filtering(TextureFiltering_Nearest).wrap(TextureWrap_Repeat); . ... wrap . ...

Atmospheric influence on the different radio-engineering system functioning . ESTIMATION OF ATMOSPHERIC OPTICAL CHARACTERISTICS AND REMOTELY SANSED IMAGE CORRECTION . ... Direct transmittance estimation results for 12 channels of the spectrometer CHRIS. ... We have managed to develop a direct method of estimating the discrete Normalized Atmospheric Point Spread Function (NAPSF) from available images alone, not using any external sources of information about the atmosphere. ... IRE RAS 1996-20 11 ...