... Turn on CPU 2. Press F2 to enter BIOS setup 3. Under Exit menu a. Reset to default BIOS settings (F9) b. Save changes 4. Under Advanced PCI Configuration a. Enable On-Card Ethernet 1 b. Enable ROM option for On-Card Ethernet 1 c. Disable On-Card Ethernet 2 5. ... Add DNS servers in /etc/resolv.conf: ifconfig eth0 xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx Add default gateway: route add default gw xxx.xxx.xxx.xxx Check settings: netstat ­nr nameserver xxx.xxx.xxx.xxx ...

... 2.3 Data acquisition Spectra generated by the Multibeam correlator contain the usual structure seen in spectra from other H i instruments: a bandpass spectrum which is the sum of the sky , ground and receiver temperatures multiplied by the product of the filters in the receiver chain; superimposed on this is a noise ... Note also that sources extended much beyond ,40 arcmin can be imaged poorly in HIPASS images because of the bandpass sidelobe effect described in Section 3.3. ...