Next: File Formats Required Up: OPTOPUS Commands and Previous: Optopus commands . Below follows a description of all parameters that can be set by the SET/OPTOPUS command, the commands which use these parameters and the default values. ... If an OPTOPUS command the default value is not used the command will, in addition to actual OPTOPUS operation, also overwrite the setting of this parameter and hence will change the default value. ... set the equinox . ... Table: Command parameters . ...

... CentralProcessor 0.11 documentation . ... The Central Processor Manager is the local monitoring and control agent for the Central Processor sub-system. ... At the moment the Central Processor Manager only controls the acquisition phase; that is, it only controls the ingest pipeline. ... In addition to the CP manager specific parameters, any parameters that begin with ice_properties are passed directly to the ICE Communicator during initialisation. ... string . ... Central Processor Manager . ...

... Chapter 10: Fine Guidance Sensors (FGS) > 10.2 Mode = POSConfig = FGS . ... 10.2.5 Time Per Exposure . ... In addition, a few stars (reference and/or target) should be observed multiple times during a visit to map any positional drift of the field due to HST pointing characteristics (see the FGS Instrument Handbook) . ... The default values of the Optional Parameters are set in this Mode to provide acceptable data for single, zero angular diameter stars. ... NULL . ... The default value is 15 arcsec...

... Meta Index / Home Page / Usage / Command-line lists of parameters . Whilst there are a large number of command-line parameters, frequently many of them will not be required. ... The parameters imageset , oldsrclistset and newsrclistset are always required. The parameters sourceno and phototype are always required. ... If more than one source is listed in the parameter sourceno then the length of the lists of each photometry parameter must be the same as the number of the sources. ...

... rotang, Date, RA, Dec, Time, accS, ast=ast, ha=ha, lst=lst, jd=jd, az=az, za=za, sep=sep, rotang=rotang, alfabeams=alfabeams . ... It is thus possible to specify, for instance: rotang, ... , ha=haHr, lst=lstHr, ast=astHr . ... alfa_angle - script to launch the GUI . alfa_ang.pro - the GUI: provides input to rotang and a graphical display of the results. rotang.pro - the main routine of the program: finds the required time, the other associated times, Az and ZA using ao_idl routines. ...

Instructions for using Menu-driven Axis Control Software . ... Altitude and azimuth axes use position feedback and the setting is in counts per second times 10. ... Use b to set the brakes and use c to clear the brakes for the corresponding axis, either azimuth or altitude. ... Use m to move to the previously specified position and velocity for the corresponding axis; either azimuth or altitude. ... Use g to move to the previously specified position and velocity for both the azimuth and altitude axis. ...

polimodel -- Produce model linear polarization and position angle images . ... Whether to apply random errors to output polarization and position angle values. seed = "" [integer] . ... This task produces a model linear polarization image and corresponding position angle image from an input image assumed to represent intensity (Stokes I parameter). ... A threshold for the input image can be defined such that polarization and position angle are not computed for input values less than this threshold. ...