... This task operates on event data in an event list. ... In the first two cases, the celestial coordinates of the reference point are taken respectively as the values of the RA_NOM , DEC_NOM or RA_OBJ , DEC_OBJ values in the input event file header. ... Although the OM attitude information may be more accurate, it will not be present throughout part of the observation, and as such, the default source for the attitude data should be "ahf". ...

Next: Program use Up: Description of program searchdup Previous: Description of program searchdup . Parameter input is done with a graphic user interface. ... Input file: Name of the input catalog file. It has to be formatted, one record per source/observation, according to the format used in the Arcetri observations and source archives. ... Minimum number of observations per source Source with less than this number of independent observations are not included in the output file . ...

... Basic Observables: Zero-differenced phase and code ionosphere-free combinations of global GNSS network stations, corrected by P1-C1 satellite code biases (cc2noncc), daily observations with 30 seconds sampling rate Sites coordinates : IGb08 reference frame coordinates and velocities Displacements: solid tides, ocean loading, pole tide loading (IERS 2010) Geometric model : Receivers antennas eccentricities, absolute receiver and ...

... The Miriad task uvgen can be used to simulate a variety of observing modes. ... Simulating a telescope approximately, let alone in some detail, requires a good many parameters. uvgen takes an appreciable number of parameters and input files to describe the telescope, correlator and source. Fortunately keyword and set-up files for some common situations exist ( e.g. simulating the ATCA and VLA). ... For example, to load typical parameters for the ATCA, use miriad% source $MIRCAT/uvgen.def.atca . ...

The VLTI Calibrator Selector Tool is a tool intended to assist in the selection of suitable interferometric calibrators for VLTI observations with MIDI and AMBER. It uses a model of the VLTI and its instruments to assess the fringe visibility, given the observed bandpass, the geometry, spectrum, and coordinates of the target and the time at which the observations are to be made. ... The tool offers an HTML/Java based interface and consists of two pages. ... The quality flag depends on LDD_chi2. ...

... The file names' construction . The flight (m) stage's file set . ... the orbital data used for the flight operation monthly (m) long-term planning, . ... The orbital calculations are based on the initial orbital data determined by KIAM RAN using the orbital radio measurements treatment.The determined initial orbital data are presented as a state vector (satellite position and velocity) in the J2000 reference. ... Accept the file with extension '.bgr', where the Moscow time (MT=UT+3h) is used. ...

The Wideband Arecibo Pulsar Processor - File Format Page . WAPP files have three sections that appear sequentially in this order: an ASCII header description, the binary header, and finally the actual binary data. ... The WAPP realtime observation engine does not produce files larger that 2 Gbytes. At one time this represented a fundamental limit to Linux files. ... Each file will have it's own header, even when the files are simply continuations of a single observation. ... long int . ...

... Figure: Massive binary evolutionary track. ... A short glance to this track is sufficient to understand that there are a lot of evolutionary scenario parameters, which affect different stages of the binary evolution. Fortunately, a very limited number of parameters has effect on the compact binary merging rate. ... The most important (and practically unique) parameter changing the galactic binary NS merging rate is the distribution of an additional (kick) velocity imparted to NS at birth. ...

... Up: Data Analysis and Processing Techniques . ... Also, a method for quality control of CCD observations is suggested. ... Everyone who observes a celestial object using a CCD detects moving celestial objects as a ``by product''. ... We hope that our investigations may be useful for near-Earth space control and also for searches of the moving celestial objects through analysis of old and new CCD frames obtained at any amateur or professional astronomical observatory. ...

EPM-ERA2012 Lunar Ephemeris and selenodynamical parameters from LLR data(1970-2012) M.V. Vasilyev, E.I.Yagudina IAA RAS, St-Petersburg, Russia Reflector at the Moon The reflector 's positions at the Moon surface 3.5 m telescope at Apache station INTRODUCTION MODERN EPHEMERIDES: 1. ... IAA RAS, Russia-EPM-ERA2012 The present analysis of (17580) LLR observations, (time interval 1970, March - 2012, February) Model ( brief description). The dynamical model EPM-ERA has been developed by G.A. Krasinsky. ...

... Description . ... The SCORPIO-2 project: . ... The multi-mode spectrograph SCORPIO-2 was developed using the experience of observations at the 6-m telescope BTA with the SCORPIO focal reducer . ... The focal reducer consists of several units ('floors') mounted in the common case in the following order (from the telescope focal plane): . ... The focal reducer is connected with the platform-adapter which used for guiding by offset stars and for illumination the spectrograph by calibration lamps. ...

Next: Simulated Results with Up: Assessment of Methods Used Previous: Introduction . ... Then one has to use regularized inversion methods in order to obtain approximate and sensible solutions. ... All these methods contain a free parameter which is the so-called regularization parameter; in the case of method ( ) this is a smoothing of the higher spatial frequencies; for the methods ( ) - ( ), it is the number of iterations. ... In the case of method ( ) the iteration scheme is given by . ...

polimodel -- Produce model linear polarization and position angle images . ... Whether to apply random errors to output polarization and position angle values. seed = "" [integer] . ... This task produces a model linear polarization image and corresponding position angle image from an input image assumed to represent intensity (Stokes I parameter). ... A threshold for the input image can be defined such that polarization and position angle are not computed for input values less than this threshold. ...

lsst.coordConv љ unknown . ... Classes . ... coordConv::OtherCoordSys Class Reference . ... OtherCoordSys (std::string const &name, double date=0, DateTypeEnum dateType= DateType_None , bool isMean =false) . ... virtual Coord љ . ... CoordSys (std::string const &name, double date, DateTypeEnum dateType, bool isMean , bool canConvert ) . ... convertFrom ( CoordSys const &fromCoordSys, Coord const &fromCoord, Site const &site, double tai=0) const . ... virtual Coord coordConv::OtherCoordSys::removePM . ...

Orbit . ... The orbit of the RadioAstron provides four types of study: . rough images of radio sources with ultra-high angular resolution, using all baselines up to the radius of the apogee, that is much larger than Earth diameter; . ... high quality imaging of radio sources, with moderate resolution, by observing either with small projected base lines Earth-spacecraft, i.e. close to the orbital plane, or near the perigee. ... high accuracy orbit determination. ... Space Radio Telescope . ...

... Column 1 gives the object name from the Case or Markarian catalogs. ... For Markarian galaxies the errors of coordinates usually lie inside 2'' (Lipovetsky [ 1983 ]). Column 4 gives the eye-estimated apparent blue magnitudes according to the same sources. ... Other names of a galaxy we give in column 7. ... In column 3 we cite the original emission-line code of the galaxy for the strength of [O III ] doublet according to the Case catalog (s - strong, m - medium, w - weak). ...

... Structure of Data . ... Catalog . ... In SAI OCL Catalog, we introduce our work on investigation of the Milky Way system of open star clusters. The main goal of our study is a search for new clusters using huge surveys. 168 new clusters have been already discovered by us using J,H,Ks data from 2MASS point source catalog. ... For 141 new clusters, we found their physical parameters using J,H,Ks data from 2MASS catalog and, for a number of clusters, our UBVRI CCD observational magnitudes. ...

Stellarium 0.12.3 . ... StelGeometryBuilder Class Reference . ... buildCircle ( StelVertexBuffer < VertexP2 > *vertexBuffer, const float x, const float y, const float radius, const int segments=128) . ... buildCylinder ( StelVertexBuffer < VertexP3T2 > *const vertexBuffer, const float radius, const float height, const int slices, const bool orientInside=false) . ... Build a fisheye-textured sphere. ... Build a flat texture mapped ring with 3D coordinates (for example for planet's rings) More.. ...

Orbital data : INTERBALL AZ GSE and GSM cartesian coordinates, GSE cartesian velocity (once per 10 minutes). ... Magnetic field data from IMAP experiment. Magnetic fileld absolute value and magnetic field index (the difference between absolute value and model value), status flag. ... Counts of H+ and O+ ions are accumulated during one spin period by detectors D6 (antisunward looking), D8 (spin plane), D10 (sunward looking) of TRICS2 subsystem (1.0-30 keV). ... TRICS1, TRICS2, TRICS3 subsystems: . ...

... CREATE FULLTEXT CONFIGURATION -- create full-text configuration . CREATE FULLTEXT CONFIGURATION cfgname PARSER prsname [ LOCALE localename ] [ AS DEFAULT ]; CREATE FULLTEXT CONFIGURATION cfgname [ { PARSER prsname | ... PARSER . ... LOCALE . ... Create new configuration test with default parser and ru_RU.UTF-8 locale. CREATE FULLTEXT CONFIGURATION test PARSER default LOCALE 'ru_RU.UTF-8'; =# \dF+ test Configuration "public.test" Parser name: "pg_catalog.default" Locale: 'ru_RU.UTF-8' Token | ...