The magnetic mapping is fulfilled by the magnetic field line tracing from the satellite position up to the Ionosphere (stop trace at the altitude 110 km). ... As a rule the Tsyganenko [1987] external magnetic field model and IOPT = 3 (Kp = 2) are used. ... The output file includes the following information: . ... For example the file with name aa9610d1.geo contains the information corresponding to the aposteriory magnetic mapping for INTERBALL Auroral Probe for the first decade of October 1996. ...

Еще в разделе: (Показать все результаты (>1839) - www.cosmos.ru/ )

... The combination is based on the two common columns across the tables, the CYCLE column and the QUADRANT column. ... For each row in the combined table that the same CYCLE/QUADRANT pair appears, epauxcomb writes out the noted values to the corresponding columns in the combined table. ... A table labelled PNAUX1 containing the following columns:  FRAME of type int-32  CYCLE of type int-32  FTCOARSE of type int-16  FTFINE of type unsigned int-16  QUADRANT of type int-8  CCDID of type int-8 2. ...

Еще в разделе: (Показать все результаты (>16457) - xmm.vilspa.esa.es/ )

• http://xmm.vilspa.esa.es/sas/6.0.0/doc/epauxcomb.ps.gz
• http://xmm.vilspa.esa.es/sas/6.5.0/doc/epauxcomb.ps.gz
• http://xmm.vilspa.esa.es/sas/8.0.0/doc/epauxcomb.ps.gz

Radio data are displayed in the following format: . After the title with name of cluster under examination and with line about kind of data under one, e.g. Radio data [ optical data ] [ radio source identifications ] [ radio spectra (1.0 or 1.1) ] . ... The first line contains the number of radio sources associated with the cluster (these are just those sources with entries in sections 'Radio galaxy', 'Radio source' and 'Radio spectrum' below). ... Radio sources in cluster: 2 # . ...

Еще в разделе: (Показать все результаты (>2331) - www.sao.ru/ )

• Function Specification
• Edition of the Table Containing the Cloud Model
• Edition of the Table Containing the Atomic Parameters

... CentralProcessor 0.11 documentation . Calibration and Imaging Documentation . ... The purpose of this software is to apply calibration parameters to Measurement Sets. It can be run with the following command, where ?config.in? is a file containing the configuration parameters described in the next section. $ ccalapply -c config.in . ... The name of the measurement set to which the calibration parameters will be applied. calibrate.scalenoise . bool . ... ccalapply (Calibration Applicator) . ...

Еще в разделе: (Показать все результаты (>29497) - www.atnf.csiro.au/ )

• ccontsubtract CentralProcessor 0.11 documentation
• cmodel (Model Image Generator) CentralProcessor 0.11 documentation
• Summary List of Setup File Parameters

... A file upload element on an HTML form. ... JavaScript 1.1: added type property . ... The HTML INPUT tag, with "file" as the value of the TYPE attribute. For a given form, the JavaScript runtime engine creates appropriate FileUpload objects and puts these objects in the elements array of the corresponding Form object. ... form . ... For all FileUpload objects, the value of the type property is "file" . ... Use the value property to obtain the file name that the user typed into a FileUpload object. ...

Еще в разделе: (Показать все результаты (>7968) - www.arcetri.astro.it/ )

• http://www.arcetri.astro.it/irlab/doc/library/javascript/clientreference/button.htm
• http://www.arcetri.astro.it/irlab/doc/library/javascript/clientreference/history.htm
• http://www.arcetri.astro.it/irlab/doc/library/javascript/clientreference/submit.htm

Next: Other parameters of the Up: The Model Previous: Initial binary parameters . As we only deal with initially massive binary systems (their primary's mass is higher than 10 ), which are capable of evolving off the main sequence during less than years, the compact stars left behind stellar evolution are (in the case of the most massive stars) NSs and BHs. ... For a NS belonging to a binary, the evolution complicates as the secondary star evolves: for example, (recycling), etc. ...

Еще в разделе: (Показать все результаты (>504) - xray.sai.msu.ru/ )

• Initial Distributions of Binary Parameters
• The Effect of Relativistic Wind on Accretion Flow Parameters
• The Stopping Radius

In this chapter we will consider an example of visual expert system written on the Actor Prolog language. ... There are a lot of methods of oil field bed stimulation that increase output of the oil production: thermal, physical-chemical, gas, microbiological, and others. ... Fig. ... The Top-Most diagram consists of three blocks: the "Describe parameters of hydrocarbon field" block, the "Check adaptability of existed methods of oil production" block, and the "Display solution" block. ... Gas methods. ...

Еще в разделе: (Показать все результаты (>532) - www.cplire.ru/ )

• Getting Started in Actor Prolog. Analyzing Web Sites.

Next: Simulated Results with Up: Assessment of Methods Used Previous: Introduction . ... Then one has to use regularized inversion methods in order to obtain approximate and sensible solutions. ... All these methods contain a free parameter which is the so-called regularization parameter; in the case of method ( ) this is a smoothing of the higher spatial frequencies; for the methods ( ) - ( ), it is the number of iterations. ... In the case of method ( ) the iteration scheme is given by . ...

Еще в разделе: (Показать все результаты (>16132) - www.stsci.edu/ )

• Examples of GHRS Phase II Proposals
• Chapter 5: Visits, Exposures and Exposure Groups
• Coordinated Parallel Containers

There are six possible ways of object description: . a) by number(s) . ... d) by list . e) by orbital elements . ... They should be introduced as year, month, day with tenth (e.g. 20021104.1). d) Computations are performed for all objects listed in the file whose path and name should be introduced into assigned data field. ... On pressing Edit file button user has a possibility to look through the list of object elements or their coordinates and velocities to add or to change it. ...

Еще в разделе: (Показать все результаты (>534) - www.ipa.nw.ru/ )

• EPHEMERIDIES OF MINOR PLANETS (EMP)
• AY2012 (preface)
• AY2011 (preface)

Databases (NSDC) of the Natural Planetary Satellites. ... In the file of explanations, source of data or bibliographic reference is indicated. ... File of data (Data) *.txt. ... Les donnИes standard de la base NSDB (Standard Data) . ... Any bibliographic reference has the following fields (please, don't mix up these reference fields hereafter called "fields" with the search fields where you will enter the data and which are hereafter denoted as "search fields" or "text fields"): . ...

Еще в разделе: (Показать все результаты (>531) - lnfm1.sai.msu.ru/ )

• IDL programs
• Data bases of Natural Satellites. Documentation. Structure
• IMCCE-SAI: Natural Satellites Data Center (NSDC). Parameters

... This file (extension .html) contains an overview of the so-called QC1 parameters. Note: this servive is new (October 2008) and still a prototype. Please be patient with broken links etc. ... Parameter score report GIRAF.2008-10-07T05:18:05.566.ab RAW_TYPE: SCI_MED setup: Medusa2_H447.1A time range: 2008-04-12 .. ... names and scores for selected QC1 parameters (scores: green=ok, red=warning); the symbols are linked to a dynamic query to the QC1 database . ... optional link to QC1 report . ...

Еще в разделе: (Показать все результаты (>10893) - www.eso.org/ )

• CONSTRICTOR parameters for astrometric reductions
• Preparation of parameter file
• Stellar parameters from calibrations of spectral types

... This API (Application Programming Interface) document has pages corresponding to the items in the navigation bar, described as follows. The Overview page is the front page of this API document and provides a list of all packages with a summary for each. ... Each package has a page that contains a list of its classes and interfaces, with a summary for each. ... Each of these pages has three sections consisting of a class/interface description, summary tables, and detailed member descriptions: . ...

Еще в разделе: (Показать все результаты (>471) - www.astro.louisville.edu/ )

System parameters on Digital UNIX . ... Digital and Cray use the number of bytes as the KIND -parameter. ... LOGICAL Default byte word KIND number = 4 1 4 LOGICAL Default double quad KIND number = 4 8 16 INTEGER int15 int31 int63 KIND number = 2 4 8 digits = 15 31 63 radix = 2 2 2 range = 4 9 18 huge = 32767 2147483647 9223372036854775807 bit_size = 16 32 64 REAL single double quad KIND number = 4 8 16 digits = 24 53 113 maxexponent = 128 1024 16384 minexponent = -125 -1021 -16381 ...

Еще в разделе: (Показать все результаты (>2349) - crydee.sai.msu.ru/ )

• Notation
• Specifications
• Overview

... Field size . Object name . ... Map size . ... Field size: the approximate size of the map in the Y direction. ... Galaxies: . ... Galaxies, which size exceeds some value depending on the field and map sizes, are displayed with their real positional angles and sizes by 25m isophote. ... In the "tools" fields there are links to the several famous AVO (Astrophysical Virtual Observatory) resources: NED and Simbad databases and DSS2 (Palomar Digitized Sky Survey) images of the corresponding sky area. ...

Еще в разделе: (Показать все результаты (>62713) - www.astronet.ru/ )

• XWare > APOD

Instructions for using Menu-driven Axis Control Software . ... Altitude and azimuth axes use position feedback and the setting is in counts per second times 10. ... Use b to set the brakes and use c to clear the brakes for the corresponding axis, either azimuth or altitude. ... Use m to move to the previously specified position and velocity for the corresponding axis; either azimuth or altitude. ... Use g to move to the previously specified position and velocity for both the azimuth and altitude axis. ...

Еще в разделе: (Показать все результаты (>634) - www.apo.nmsu.edu/ )

• TCC UDP Packets
• Telescope Parameters
• lsst.tcc: tcc.axis.computeSlew Namespace Reference

Rotang can either be run from the command line as described here or through the alfa_ang GUI . ... To run rotang at Arecibo: . Start IDL . ... rotang, Date , RA , Dec , Time , /choice . Here Date takes the format YYMMDD (e.g. 041128 for the 28 th of November, 2004). ... Rotang also calculates the Azimuth and Zenith Angle fir every source. If the Zenith Angle is greater than 20 degrees, then the program will return that the source is down and will not calculate an optimum ALFA angle. ...

Еще в разделе: (Показать все результаты (>3342) - www.naic.edu/ )

• ALFA Diode Temperature-Explanatory Notes
• Your NED Search Results
• The Mock Spectrometer

slitless -- Extract a spectrum from a direct/GRISM image pair slitless image grism output PARAMETERS . ... A two dimensional direct image to be used to select an object. grism . A two dimensional GRISM image containing slitless spectra of objects present in the direct image. output . ... Toggle whether or not a background estimate is subtracted from the extracted object spectrum. mingood = INDEF . Pixels of the grism image with values smaller than this are ignored. maxgood = INDEF . ...

Еще в разделе: (Показать все результаты (>251) - www.stecf.org/ )

• HSTPOLSIM (V1.00) --- April99 --- HSTPOLSIM (V1.00)
• HSTPOLPOINTS (V1.00) --- May99 --- HSTPOLPOINTS (V1.00)
• HSTPOLIMA (V1.00) --- April99 --- HSTPOLIMA (V1.00)

... Several of the tasks in the spectral package share a common set of parameters. ... Each task in the spectral package has a hidden parameter which points to the pkgpars parameter file. The parameters stored here include the observed data sets and the model descriptor, and instrument-specific parameters. ... The observed counts and error data set contained in the table file ( *_obs.tab ) produced by qpspec will be the input data for subsequent spectral tasks. ...

Еще в разделе: (Показать все результаты (>2324) - hea-www.harvard.edu/ )

• Fixing and Freeing Region Markers
• *tprint* - Reading a Table File Created by imcnts
• The Markers Menu

This page will contain definitions (and basic references) of the following parameters: . cross-sections C ext , C sca , C abs , C bk ; . efficiencies Q ext , Q sca , Q abs , Q bk ; . ... TE/TM mode definitions for arbitrary shapes. Note that some parameters are defined in a quite different (specific) manner than for spherical scatterers, and some definitions in the book of Mishchenko et al. ...

Еще в разделе: (Показать все результаты (>319) - www.astro.spbu.ru/ )

• Database of Optical Properties -- Level: subsubpage
• Database of Optical Constants -- Level: welcome
• Model realization and some results

... The IDL users can call these codes by the CALL_EXTERNAL function with the following syntax: res=CALL_EXTERNAL(libname, 'GET_MW', ParmIn, s, /F_VALUE) Here libname is the name of the appropriate dynamic link library or shared ob ject. ... Then, ParmIn is the 29-element single-precision floating-point array that contains the input parameters for the gyrosynchrotron code, and s is the two-dimensional single-precision floatingpoint array that contains the results of the computation. ...

Еще в разделе: (Показать все результаты (>2372) - star.arm.ac.uk/ )

• Irregular Satellite Research
• FFIT - Command Syntax
• SCL Sfit Commands