... The GHRS has the usual components of an astronomical spectrograph: entrance apertures, a collimator, dispersers, camera mirrors, and detectors. ... The collimator and camera mirrors are unexceptional and need no further description here (see ``The HST Focal Plane and the GHRS Apertures'' on page 73 for details). ... The first two first-order gratings, G140L and G140M, have their spectra imaged by mirror Cam-A onto detector D1, which is optimized for the shortest wavelengths. ...

... They are concerned with Attitude Control System of the spacecraft, satellite visibility from tracking stations, limits on the satellite autonomous operations during the orbit, and needs for auxiliary operations with the spacecraft. ... Among the operational constraints the most important one is the number of programmed slews per orbit, which determines the maximum number of radio sources to be observed during one orbit. ... System temperature (K) . ... Progress of the RadioAstron Project in Pictures...

... This is possible at modest cost due to the low moments of inertia of the telescope and enclosure. ... This same performance will be achieved in higher winds when the telescope enclosure is facing away from the wind, or by using wind screens. ... The telescope system (MILT) will be remotely operable with an on-site operator's assistance by an astronomer located at one of the ARC member institutions. ... Mean Wind Speed . ... Offsets > 10 deg: 1 arc sec rms max . ... 5 sec max, tracking to tracking . ...

... Science . ... Science Users Information > Observing Facilities > Paranal Facilities > Paranal Instrumentation . ... Offered Instruments . ... Paranal News . ... Paranal Instrumentation . ... Overview . ... Instrument Description . Manuals . ... Visitor Instructions . ... VLTI Visitor Instrument . ... Paranal Science Operations . ... The links to the different instruments provide an overview of the respective instrument capabilites and the offered instrument modes. ... Last Update: 29.02.16 ESO . ...

... This is done by taking in all input files the extension whose name is specified by the maintable parameter (called 'merged extension' in what follows) and merging the columns into a single output extension of the same name. ... Its contents is taken from the CCDID keyword (and QUADRANT for EPIC PN). ... To propagate other column specific keywords, they must be specified manually via the extensionchecks , mainattributes , maxattributes and minattributes parameters (see above). ...

... ROBOTIC SPACECRAFT MISSION TO MARS. ... Spacecraft . ... of 1st stage engines thrust . ... 2nd stage engine ignition . ... 1st stage separation . ... Payload (Block-D, SC, adapter, lower casing, middle casing) separation . ... 1st ignition of the Block D main engine's launching provision system (SOZ) . ... 1st ignition of the Block-D main engine . ... 2nd ignition of the Block-D main engine . ... Block-D did not impart the requirement impulse to the spacecraft and separated from the spacecraft. ...

... Average resolution at altitude H=668 km . ... Swath width at H=668 km and inclination of beginning of swath 20.48 degrees . ... Resolution at H=668 км . ... Наименование параметра . ... 1 канале . ... Полоса обзора при H=668 км . ... 1-5 спектральной зоне, не более . ... 1 спектральной зоне . 0,48-0,52 мкм . ... 0,915-0,997 мкм . ... 1-4 канал . ... 1-4 каналов . ... Спектральные характеристики каналов (по уровню 0,5): . ... For more information send a mail to: info@sputnik.infospace.ru . ...

... GSAOI Home . Instrument . ... The Gemini South Adaptive Optics Imager (GSAOI) is a near-infrared adaptive optics camera that will be used with the Multi-Conjugate Adaptive Optics (MCAO) system on the Gemini South 8-m telescope . ... Gemini's major instrumentation goal is to develop its Multi-Conjugate Adaptive Optics (MCAO) system for scientific use on Gemini South. ... Existing adaptive optics systems use a single natural guide star or artifical laser guide star to measure this image blur. ...

Next: Summary of reduction Up: Echelle Reduction Previous: Saving the Data . In the present version we will be concerned with the standard configuration of CASPEC, the Cassegrain Echelle Spectrograph which is in operation at the Cassegrain focus of the ESO 3.6 m telescope. ... In its standard configuration CASPEC uses a a 31.6 lines/mm echelle grating together with a 300 lines/mm grating cross disperser. ... The table shows the change in resolution with the order number. Table: Resolution . ...

The following papers summarize the characterization and technical performance of IBIS : . ... Characterization of Fabry-Perot interferometers and multi-etalon transmission profiles. ... Righini, A., Cavallini, F., Reardon, K. P., 2010, Astronomy and Astrophysics , 515 , A85, . ... The filter wheel is located between the two interferometers. ... The interferometers can be rapidly tuned, simultaneously, so to allow sequential scanning of the spectral lines of interest (see movie in IBIS Intro ). ...

GRANAT is the Russian x-ray sattelite launched to the high apogee orbit (200,000 km) and operated almost for 10 years (1989 -1999) , carrying out four major instruments: French SIGMA coded-mask hard x-ray telescope (30-1000 keV), Soviet ART-P coded-mask telescope (2??-60?? keV), all-sky monitor WATCH (6-150 keV), and a gamma-burst detector PHEBUS . ... Since September 1994, GRANAT is in the survey mode. ... Explore pages devoted to individual GRANAT instruments (including main scientific results): . ...

... Status of the ELECTRON experiment . ... The objective of the ELECTRON experiment is to perform 3-D measurements of the plasma electrons in the energy range from 10 eV to 26000 eV, with good angular resolution, sensitivity and large dynamical range. ... Figure 1 presents the ELECTRON sensor. ... Click on the picture to view large one) . ... Figure 3 shows dynamical spectra with counting rate measurements performed by ELECTRON experiment during very multiple magnetopause crossings on February, 4, 1996...

The database contains references to the papers, data files and links to the Internet resources related to measurements and calculations of the optical constants in the wavelength interval from X-rays to radio domain. ... References to some useful books and reviews on the subject (e.g. the classical handbooks edited by E.D.Palik) and links to Internet collections of optical constants and personal WWW pages with related software were also placed in the database. You have arrived at our welcome page. ...

... The European HST Archive has been moved to ESA's European Space Astronomy Centre ( ESAC ), Spain, where most of ESA's Space Science Archives are located and operated from. ... The Space Telescope European Coordinating Facility (ST-ECF), jointly operated by ESA and the European Southern Observatory ( ESO ) was, until the end of 2010, the European HST science facility, supporting the European astronomy community in exploiting the research opportunities provided by the Hubble Space Telescope. ...

... Meade Instruments Corporation . ... 505 Connector Cable Set . Operating Instructions for use with the Meade? Autostar? ... The #505 Connector Cable Set provides access to three Autostar operations: . ... 2: #505 Connector Cable Set connects between two Autostar handboxes. (1) 3-foot cable. ... If you have a question concerning use of the #505 Connector Cable Set, call the Meade Instruments Customer Service Department at (949) 451-1450, or fax at (949) 451-1460. ... Autostar Downloads . ...

Stellarium 0.12.3 . ... Classes . ... ClassљMembers . ... StelMainScriptAPIProxy Class Reference . Because the core API runs in a different thread to the main program, direct function calls to some classes can cause problems - especially when images must be loaded, or other non-atomic operations are involved. ... Connect signals from the StelMainScriptAPI to the instance of this class running in the main thread and let the slots do the work which is not possible within StelMainScriptAPI itself. ...

... Charge Coupled Devices (CCD) are currently by far the most widely used type of detector in astronomy. ... After a brief introduction to the VLT Control System, the VLT CCD Detectors Control Software is presented. The VLT Control System is a distributed system consisting of a set of UNIX Workstations, dedicated to high level operations, such as coordination of sub-system activities and interface to the users, and VME-based Local Control Units (LCU), dedicated to the control of sub-systems hardware. ...

In describing the SHELTRAN language the following nomenclature is used: . SHELTRAN keywords appear in capitals. SHELTRAN keywords always start on a new line and must be followed by at least one blank) . Syntactic elements are enclosed within < > . Items enclosed within [ ] are optional. < statement > is used to denote any SHELTRAN and/or FORTRAN statement(s). Statement labels. IF construct. SELECT construct. WHILE construct. ... Fortran directive lines. ...

This diagram illustrates the effects of floating a box ("inner") and how its "sibling" is forced below it due to the 'clear' property. A document window is shown, with 8 lines (numbered 1 to 8), each 24px high. Text before the "inner" box flows on lines 1 and halfway on line 2. The "inner" box has been floated to the right and occupies the second half of lines 3 and 4. ... The lines, as they appear in the image, contain: 1 Beginning of body contents. ... Inner contents" is blue. ...

... Description . ... The SCORPIO-2 project: . ... The multi-mode spectrograph SCORPIO-2 was developed using the experience of observations at the 6-m telescope BTA with the SCORPIO focal reducer . ... The focal reducer consists of several units ('floors') mounted in the common case in the following order (from the telescope focal plane): . ... The focal reducer is connected with the platform-adapter which used for guiding by offset stars and for illumination the spectrograph by calibration lamps. ...