... The GHRS has the usual components of an astronomical spectrograph: entrance apertures, a collimator, dispersers, camera mirrors, and detectors. ... The collimator and camera mirrors are unexceptional and need no further description here (see ``The HST Focal Plane and the GHRS Apertures'' on page 73 for details). ... The first two first-order gratings, G140L and G140M, have their spectra imaged by mirror Cam-A onto detector D1, which is optimized for the shortest wavelengths. ...

... They are concerned with Attitude Control System of the spacecraft, satellite visibility from tracking stations, limits on the satellite autonomous operations during the orbit, and needs for auxiliary operations with the spacecraft. ... Among the operational constraints the most important one is the number of programmed slews per orbit, which determines the maximum number of radio sources to be observed during one orbit. ... System temperature (K) . ... Progress of the RadioAstron Project in Pictures...

... This is possible at modest cost due to the low moments of inertia of the telescope and enclosure. ... This same performance will be achieved in higher winds when the telescope enclosure is facing away from the wind, or by using wind screens. ... The telescope system (MILT) will be remotely operable with an on-site operator's assistance by an astronomer located at one of the ARC member institutions. ... Mean Wind Speed . ... Offsets > 10 deg: 1 arc sec rms max . ... 5 sec max, tracking to tracking . ...

... Science . ... Science Users Information > Observing Facilities > Paranal Facilities > Paranal Instrumentation . ... Offered Instruments . ... Paranal News . ... Paranal Instrumentation . ... Overview . ... Instrument Description . Manuals . ... Visitor Instructions . ... VLTI Visitor Instrument . ... Paranal Science Operations . ... The links to the different instruments provide an overview of the respective instrument capabilites and the offered instrument modes. ... Last Update: 29.02.16 ESO . ...

... This is done by taking in all input files the extension whose name is specified by the maintable parameter (called 'merged extension' in what follows) and merging the columns into a single output extension of the same name. ... Its contents is taken from the CCDID keyword (and QUADRANT for EPIC PN). ... To propagate other column specific keywords, they must be specified manually via the extensionchecks , mainattributes , maxattributes and minattributes parameters (see above). ...

... ROBOTIC SPACECRAFT MISSION TO MARS. ... Spacecraft . ... of 1st stage engines thrust . ... 2nd stage engine ignition . ... 1st stage separation . ... Payload (Block-D, SC, adapter, lower casing, middle casing) separation . ... 1st ignition of the Block D main engine's launching provision system (SOZ) . ... 1st ignition of the Block-D main engine . ... 2nd ignition of the Block-D main engine . ... Block-D did not impart the requirement impulse to the spacecraft and separated from the spacecraft. ...

... Average resolution at altitude H=668 km . ... Swath width at H=668 km and inclination of beginning of swath 20.48 degrees . ... Resolution at H=668 км . ... Наименование параметра . ... 1 канале . ... Полоса обзора при H=668 км . ... 1-5 спектральной зоне, не более . ... 1 спектральной зоне . 0,48-0,52 мкм . ... 0,915-0,997 мкм . ... 1-4 канал . ... 1-4 каналов . ... Спектральные характеристики каналов (по уровню 0,5): . ... For more information send a mail to: info@sputnik.infospace.ru . ...

... GSAOI Home . Instrument . ... The Gemini South Adaptive Optics Imager (GSAOI) is a near-infrared adaptive optics camera that will be used with the Multi-Conjugate Adaptive Optics (MCAO) system on the Gemini South 8-m telescope . ... Gemini's major instrumentation goal is to develop its Multi-Conjugate Adaptive Optics (MCAO) system for scientific use on Gemini South. ... Existing adaptive optics systems use a single natural guide star or artifical laser guide star to measure this image blur. ...

Next: Summary of reduction Up: Echelle Reduction Previous: Saving the Data . In the present version we will be concerned with the standard configuration of CASPEC, the Cassegrain Echelle Spectrograph which is in operation at the Cassegrain focus of the ESO 3.6 m telescope. ... In its standard configuration CASPEC uses a a 31.6 lines/mm echelle grating together with a 300 lines/mm grating cross disperser. ... The table shows the change in resolution with the order number. Table: Resolution . ...

The following papers summarize the characterization and technical performance of IBIS : . ... Characterization of Fabry-Perot interferometers and multi-etalon transmission profiles. ... Righini, A., Cavallini, F., Reardon, K. P., 2010, Astronomy and Astrophysics , 515 , A85, . ... The filter wheel is located between the two interferometers. ... The interferometers can be rapidly tuned, simultaneously, so to allow sequential scanning of the spectral lines of interest (see movie in IBIS Intro ). ...