Next: The Reduction Session Up: Echelle Reduction Previous: Standard orientation . ... The command SHOW/ECHELLE displays only those parameters which must be set according to the options and methods chosen for the reduction. ... Current parameters are saved with the command SAVE/ECHELLE name , where name is the session name. ... Current parameter values are set to the default value with the command INIT/ECHELLE , or set to the values of a previously saved session with INIT/ECHELLE name . ...

Еще в разделе: (Показать все результаты (>2590) - www.sao.ru/ )

• Outputs
• In Case of Trouble
• Print options

Next: Deleting Calibration Tables - Up: Calibration, the ATCA, and Previous: Copying Calibration Tables - . ... This task can list and plot antenna gain, bandpass, delay and leakage terms. ... Possibilities are gains ( i.e. the antenna gains), polarisation (the polarisation leakage terms), delays and bandpass . ... The select parameter behaves like the normal visibility selection parameter (see Section 5.5 ) - except that you are selecting gains rather than visibilities. ...

Еще в разделе: (Показать все результаты (>18642) - www.atnf.csiro.au/ )

• Task parameter manipulation
• mbspect
• mslist (Measurement summary and data inspection utility) CentralProcessor 0.11

... Common options . All SAS tasks support the following command line options: . ... If the task uses the ODF Access Layer ( oal ) the following command line option is recognized as well: . ... odf odf . ... odf can be the name of an ODF summary file as created by the task odfingest or merely the name of a directory containing one. ... All tasks may have additional parameters in a parameter file, that can be set on the command line (more information can be found in package param ). param = value . ...

Еще в разделе: (Показать все результаты (>31561) - xmm.vilspa.esa.es/ )

• Parameters
• Index
• Analysis options

OptInt PmWiki : Pm Wiki / Page Directives . ... attachlist NAME:) shows a list of attachments of the group or page NAME. (:attachlist ext=xxx:) specifies an extension for filtering by type of file. (:attachlist *:) shows the uploads directory and permits browsing of all uploaded files by directory ( will not work if $EnableDirectDownload is set to 0 ). (:description text:) . ... If supported by the skin , each of these turns off the corresponding portion of the page. (:redirect PageName:) . ...

Еще в разделе: (Показать все результаты (>3249) - www.mrao.cam.ac.uk/ )

• OptInt PmWiki : Page Directives

Region markers can be moved, resized, rotated, zoomed, deleted, and can change geometric type. ... For example, markers placed on astronomical catalog positions should be fixed so that one cannot accidentally move them off the specified position. ... Parameters can be fixed using the fix option of the regions public access point (for fixing classes of markers) or by means of a fix keyword in the definition of an externally loaded marker. ... In the command: echo "regions fix all -position -size" | ...

Еще в разделе: (Показать все результаты (>2736) - hea-www.harvard.edu/ )

• *counts_plot* - Inspection of Results
• Funtools and DS9 Image Display
• *tvmark* - Mark pixel positions on the display

... VERSION is a command-line program that prints the current version number of the SPICE Toolkit. To display only the SPICE toolkit version, VERSION should be executed without command arguments: . ... output all parameters for the environment for which the toolkit package was prepared, including SPICE toolkit version, system ID, operating system, compiler, and binary file format, max and min values for double precision and integer numbers. -v(ersion) . ... To display only the SPICE toolkit version: . ...

Еще в разделе: (Показать все результаты (>19570) - www.stsci.edu/ )

• USC Manager Tool Design Concept page
• Power Spectral Analysis
• Introduction to HST Data Handbook v8.0

... As part of the development of a new Python-based CL for IRAF tasks by the Science Software Group at STScI, we have developed a GUI-based parameter editor for IRAF tasks using Tkinter. This new parameter editor is intended to provide the equivalent functionality of the IRAF EPAR task, but to make parameter editing easier by using appropriate user interface elements, such as menu choice lists, action buttons, and file browsers. ... Figure 1: The GUI-based Python/Tkinter IRAF task parameter editor. ...

Еще в разделе: (Показать все результаты (>1992) - www.adass.org/ )

• Xguiphot: A New Aperture Photometry Tool for IRAF
• GUI-fying and Documenting your Shell Script
• ADASS 2002 Conference Proceedings

. To display the current value of all options enter the command: :set all . To display the value of those options whose values have been reset from their default enter the command: :set .

Еще в разделе: (Показать все результаты (>333) - comet.sai.msu.ru/ )

• Examples of setting vi options temporarily
• Displaying the pathname to the current directory
• Examples of using multiple options

... Scoring Necessary step towards more automated certification Idea: · define key QC1 parameters , check new values against trending for those · evaluate compliance: o if new within defined range, ok o if outside: nok · user may focus on nok ones, while ok is certified automatically in `confidence mode ' Required: · configure set of key parameters per product · configure comparison mode o fixed: ...

Еще в разделе: (Показать все результаты (>10414) - www.eso.org/ )

• http://www.eso.org/~qc/dfos/ABbuilder.txt
• POLIMPLOT (V2.00) --- November00 --- POLIMPLOT (V2.00)
• fitsreport

... Field size . Object name . ... Map size . ... Field size: the approximate size of the map in the Y direction. ... Galaxies: . ... Galaxies, which size exceeds some value depending on the field and map sizes, are displayed with their real positional angles and sizes by 25m isophote. ... In the "tools" fields there are links to the several famous AVO (Astrophysical Virtual Observatory) resources: NED and Simbad databases and DSS2 (Palomar Digitized Sky Survey) images of the corresponding sky area. ...

Еще в разделе: (Показать все результаты (>41974) - www.astronet.ru/ )

Appendix C. Display Device Names . ... A "display device name" is a string description that uniquely identifies a display device; it follows the format "<type>-<number>", for example: "CRT-0", "CRT-1", "DFP-0", or "TV-0". ... Display device names can be used in the MetaMode, HorizSync, and VertRefresh X config options to indicate which display device a setting should be applied to. ... That is why specifying the display device name is preferable. ... Appendix B. X Config Options . ...

Еще в разделе: (Показать все результаты (>3105) - www.naic.edu/ )

• CIMA Software Components
• Chapter 18. Configuring a Notebook
• CIMA Primer

... A reset button on an HTML form. ... Client-side object . ... JavaScript 1.1: added type property; added onBlur and onFocus event handlers; added blur and focus methods . JavaScript 1.2: added handleEvent method The HTML INPUT tag, with "reset" as the value of the TYPE attribute. ... JavaScript 1.0 blur() None The following example removes focus from the reset button userReset: userReset.blur() This example assumes that the button is defined as <INPUT TYPE="reset" NAME="userReset"> Reset.focus . ...

Еще в разделе: (Показать все результаты (>6947) - www.arcetri.astro.it/ )

• http://www.arcetri.astro.it/irlab/doc/library/javascript/clientreference/option.htm
• http://www.arcetri.astro.it/irlab/doc/library/javascript/clientreference/select.htm
• Tunable Kernel Parameters?

Next: The Frequency-Frequency (FF) Plane Up: The Chirplet Transform: Previous: Autochirplet and Cross Chirplet . In practice, from a computational, data storage, and display point of view, the chirplet transform is unwieldy. Therefore, we consider subspaces of the entire parameter space. ... For example, consider the chirprate-frequency (CF) plane, computed with a Gaussian window (Gaussian so that chirprate and dispersionrate do not need to be dealt with separately). ...

Еще в разделе: (Показать все результаты (>1409) - crydee.sai.msu.ru/ )

• The Frequency-Frequency (FF) Plane
• Dynamic HTML in Communicator
• SunSoft

polimplot -- Plot a polarization vector map . ... inpol = "" [name] . Input linear polarization image (in %) to plot. inpopa = "" [name] . Input image for position angle of linear polarization vectors (degrees). poi_err = "" [boolean] . ... Name of corresponding polarization position angle error image (degrees). ... This task is a flexible tool for plotting a polarization vector map from two images of the polarization and the position angle of the polarization vector. ...

Еще в разделе: (Показать все результаты (>251) - www.stecf.org/ )

• ASNCOMBINE (Nov98) --- nictools --- ASNCOMBINE (Nov98)
• SLITLESS (Oct97) --- ST_ECF --- SLITLESS (Oct97)
• MARKBACK (Aug99) --- nictools --- MARKBACK (Aug99)

... CREATE FULLTEXT DICTIONARY -- create a dictionary for full-text search . CREATE FULLTEXT DICTIONARY dictname LEXIZE lexize_function [ INIT init_function ] [ OPTION opt_text ] ; CREATE FULLTEXT DICTIONARY dictname [ { INIT init_function | ... CREATE FULLTEXT DICTIONARY will create a new dictionary used to transform input word to a lexeme. If a schema name is given (for example, CREATE FULLTEXT DICTIONARY myschema.dictname ... ) then the dictionary is created in the specified schema. ... INIT . ...

Еще в разделе: (Показать все результаты (>1096) - www.sai.msu.su/ )

• FTS Dictionary Example
• xntpd - Network Time Protocol (NTP) daemon
• ntptime - read kernel time variables

Stellarium 0.12.3 . ... Classes . ... FileљStructure . ... StelToneReproducer Class Reference . ... Set the eye adaptation luminance for the display (and precompute what can be) Usual luminance range is 1-100 cd/m^2 for a CRT screen. ... Set the eye adaptation luminance for the world (and precompute what can be) More... љ . ... Return adapted luminance from world to display. ... Return adapted luminance from world to display with 1 corresponding to full display white. ... xyYToRGB (float *xyY) const . ...

Еще в разделе: (Показать все результаты (>824) - astro.uni-altai.ru/ )

• Stellarium: CLIProcessor Class Reference
• Stellarium: core/modules/GridLinesMgr.hpp Source File
• Stellarium: AngleSpinBox Class Reference

Next: Star Formation Rate and Up: No Title Previous: Calculation of Evolutionary Tracks . To start calculations, we choose the distributions of the initial binary parameters: the mass of the primary ZAMS component, , binary mass ratio, , orbital separation a . ... whereas the mass ratio distribution is not. ... The zero assumption often made is that the mass ratio distribution has a flat shape, that is binaries with a high mass ratio occur as frequently as those with equal masses. ...

Еще в разделе: (Показать все результаты (>550) - xray.sai.msu.ru/ )

• Initial parameters of compact stars
• Initial binary parameters
• Dependence on the Scenario Parameters and Initial Distributions

lte-codes . Sterne . ... In 2006, Behara and Jeffery introduced a new file format for the model atmospheres produced by STERNE and used by SPECTRUM and SFIT. ... allow depth-dependent descriptions of composition, and . ... model.lambda_ref <lambda ref > . ... abundance < elem > < abund > . ... structure.abundance < elem > : ( needs N depth ) . ab elem,1 , ab elem,2 , ..., ab elem,Ndepth > . ... structure.tau_ref : ( needs N depth ) . ... structure.opac_ref : ( needs N depth ) . ...

Еще в разделе: (Показать все результаты (>2012) - star.arm.ac.uk/ )

• Sfit Control Language: Classified Listing
• Spectrum - control
• SCL Sfit Genetic Commands

... Публикации и издания Публикации профессорско-преподавательского состава СГАУ Издания проф. Сосниной Т.Н. Biosphere: Analysis of Value Parameters . ... Besides, the ways of saving the use value and value properties of biosphere are analyzed. The expediency of transformation of two-criterion theory of value into the three- criterion theory of the balance of value, where the ecologic component performs the function of the key criterion has been founded. ... BIOSPHERE USE VALUE OF THE PRODUCT: MAIN . ...

Еще в разделе: (Показать все результаты (>644) - www.ssau.ru/ )

... public class ParticleAnalyzer . ... static int . ... Add particles to ROI Manager. protected boolean . ... Clear ImageJ console before starting. static int . ... protected static int . ... Do not measure particles touching edge of image. protected boolean . ... Flood fill to ignore interior holes. protected static int . ... Display image containing binary masks of measured particles. static int . ... Field Detail public static final int SHOW_RESULTS . ... protected static final int NOTHING . ...

Еще в разделе: (Показать все результаты (>587) - www.astro.louisville.edu/ )

• CurveFitter (ImageJ API)
• Uses of Class ij.process.ImageStatistics (ImageJ API)
• Uses of Class ij.gui.Roi (ImageJ API)