... CentralProcessor 0.11 documentation . ... These parameters govern the pre-processing needed for the science field, to split by beam, flag, apply the bandpass (although none of the parameters listed here relate to that), and average to continuum resolution. ... FIELD_SELECTION_SCIENCE . ... Range of channels in science observation (used in splitting and averaging). ... Dynamic threshold applied to amplitudes when flagging science field data [sigma] . ... User Parameters - Bandpass Calibration . ...

Еще в разделе: (Показать все результаты (>38528) - www.atnf.csiro.au/ )

• User Parameters - Pipeline & job control CentralProcessor 0.11 documentation
• User Parameters - Bandpass Calibration CentralProcessor 0.11 documentation
• Central Processor Manager CentralProcessor 0.11 documentation

... The SF does not contain all the information required to process the ODF with the SAS. odfingest extends the SF with data extracted from the instrument housekeeping data files and the calibration database. It creates a new summary file: the SAS ODF Summary File (SOSF). ... The user need not have write access to the ODF directory. odfingest uses the parameter outdir to learn where to write the SOSF. ... Alternatively, the name of the SOSF can be passed to odfingest with the parameter summaryfile . ...

Еще в разделе: (Показать все результаты (>22426) - xmm.vilspa.esa.es/ )

• Processing OM Image mode data

... previous | GPI Data Pipeline 1.0 documentation . ... Observed Effect and Relevant Physics: . ... Image persistence is effect of the observed flux of previous images impacting the following observations as an elevated dark current (see Figure 1). ... Persistence removal is performed using the ?Persistence Removal of previous images? primitive. ... This primitive must not be run on flexure-corrected data as the persistence is derived from the previous image and will not change with elevation. ...

Еще в разделе: (Показать все результаты (>27419) - www.stsci.edu/ )

• Recipe Editor GPI Data Pipeline 1.0 documentation
• STSDAS release notes
• INS Master Schedule

... Basic Observables: Zero-differenced phase and code ionosphere-free combinations of global GNSS network stations, corrected by P1-C1 satellite code biases (cc2noncc), daily observations with 30 seconds sampling rate Sites coordinates : IGb08 reference frame coordinates and velocities Displacements: solid tides, ocean loading, pole tide loading (IERS 2010) Geometric model : Receivers antennas eccentricities, absolute receiver and ...

Еще в разделе: (Показать все результаты (>337) - www.gao.spb.ru/ )

• General description of the database

Examples of pipeline processing . ... This page presents examples of "on the fly" processing of FITS astronomical data available on the WEB using the HyperLeda pipeline tools. ... In many cases, raw data are archived and a consisten description of the file (FITS header) allows to process them on the fly. ... This first command makes a "pre-view" display of the image. o=fa:L93111HP1/00147&z=vg . ... The result of a pipeline processing is a FITS file that you can read as a normal disk file. ...

Еще в разделе: (Показать все результаты (>3904) - www.sao.ru/ )

• HyperLEDA documentation: parameter: t
• prefork - Apache HTTP Server
• HyperLEDA documentation: parameter: agnclass

Next: Program use Up: Description of program searchdup Previous: Description of program searchdup . Parameter input is done with a graphic user interface. ... Input file: Name of the input catalog file. It has to be formatted, one record per source/observation, according to the format used in the Arcetri observations and source archives. ... Minimum number of observations per source Source with less than this number of independent observations are not included in the output file . ...

Еще в разделе: (Показать все результаты (>9112) - www.arcetri.astro.it/ )

• prefork - Apache HTTP Server
• mod_macro - Apache HTTP Server
• Determination of the Detector Parameters

... overview of pyQC . ... output used by . ... All pyQC scripts and modules share a similar structure. Python offers to group functions, classes, etc. into modules which can be imported by different scripts. ... In order to avoid confusion if names are used by different (especially external) modules, the QC scripts use the 'from' statement only for pyQC modules, i.e.: . ... For other modules, the simple 'import' statement is used: . ... Python modules are also used for keeping script configuration. ...

Еще в разделе: (Показать все результаты (>67218) - www.eso.org/ )

• VLTI Calibrator Selection Help Page
• ESO - Phase 3
• ESO - Release Description

... The results are used in quasireal time by the observing process, but also as input by hardware quality control, by the dynamical scheduler, and by the Science Pipeline. Among processing operations are the calibration of the atmospheric absorption, of phase radiometric correction, of pointing scans, of phase and amplitude reference measurements, .. ... Using the last few measurements, we will determine a provisional amplitude calibration curve (to be also used by the Quick Look pipeline). ...

Еще в разделе: (Показать все результаты (>1873) - www.adass.org/ )

• Enhanced HST Pointing and Calibration Accuracy: Generating HST Jitter Files at
• The SRON-HeaD Data Analysis System
• ETCs and Observations Simulation at the VLT

This session will provide a forum for a discussion of variety of topics in Astrostatistics following the Special Session "Lectures on Astrostatistics" held on Wednesday morning. It will also anticipate the "Time-Domain and Applicable Methodologies" session scheduled for Thursday morning. ... 111.02 - Andreas Hans Wilhelm Kupper -- Exploding Satellites - The Tidal Debris of the Ultra-Faint Dwarf Galaxy Hercules . ... Moderators: Aneta Siemiginowska (CfA) and Vinay Kashyap (CfA) . ...

Еще в разделе: (Показать все результаты (>4099) - hea-www.harvard.edu/ )

• Tutorials on AstroStatistics and R
• Table Filtering

... Measurement of the MASS detectors parameters with mass program January 24, 2015 [112707] . MASS/DIMM electronics. ... Turbina-core(D): Dimm User Guide. ... N.Shatsky, V.Kornilov, The revision of the MASS/DIMM star catalogue. ... О.Возякова, В.Корнилов, Н.Шатский, Новое программное обеспечение прибора MASS/DIMM. ... V.Kornilov, N.Shatsky, S.Potanin, O.Voziakova, B.Safonov Preliminary results of astroclimate parameters measurements at the Sternberg 2.5m telescope installation site. ...

Еще в разделе: (Показать все результаты (>31) - curl.sai.msu.ru/ )

... SphereParams Struct Reference . ... SphereParams (const float radius) . ... Definition at line 50 of file StelGeometryBuilder.hpp . ... Definition at line 103 of file StelGeometryBuilder.hpp . ... Definition at line 120 of file StelGeometryBuilder.hpp . ... Definition at line 112 of file StelGeometryBuilder.hpp . ... Definition at line 118 of file StelGeometryBuilder.hpp . ... Definition at line 110 of file StelGeometryBuilder.hpp . ... Definition at line 114 of file StelGeometryBuilder.hpp . ...

Еще в разделе: (Показать все результаты (>1036) - astro.uni-altai.ru/ )

• Stellarium: CLIProcessor Class Reference
• Stellarium: SphericalRegion::DrawParams Struct Reference
• Stellarium: TextParams Struct Reference

The Wideband Arecibo Pulsar Processor - File Format Page . WAPP files have three sections that appear sequentially in this order: an ASCII header description, the binary header, and finally the actual binary data. ... The WAPP realtime observation engine does not produce files larger that 2 Gbytes. At one time this represented a fundamental limit to Linux files. ... Each file will have it's own header, even when the files are simply continuations of a single observation. ... long int . ...

Еще в разделе: (Показать все результаты (>7322) - www.naic.edu/ )

• Alfacal
• GALFA System Description
• GALFA Documentation

Status of the RadioAstron project development . The engineering model of the Space Radio Telescope (SRT) was assembled in Lavochkin Association (LA) in the configuration consisting of 10-m parabolic radio astronomical antenna made of carbon-fiber, F ocal and Device cabins of the scientific payload and on-board and ground complex of high data rate up-down radio link (VIRK). ... Then,radio astronomical tests were conducted using real radio sources. ... Space Radio Telescope . ... Data Processing . ...

Еще в разделе: (Показать все результаты (>227) - www.asc.rssi.ru/ )

• GOCG Pre-Observation Products

asncombine -- Process and combine images in one or two NICMOS associations asncombine association . ... set to yes to include error planes in co-added images error. background . ... This is useful to use different background subtractions for different images. fheader . set to yes in order to multiply the background by the value of keyword "factor" in the image header. ... Set to yes to use quadrants statistics save in the image header from previous runs of asncombine. regquad1 . ...

Еще в разделе: (Показать все результаты (>296) - www.stecf.org/ )

• MAKEFLAT (Sep99) --- nictools --- MAKEFLAT (Sep99)
• ASNPHOT (Nov98) --- nictools --- ASNPHOT (Nov98)
• TRANBACK (V0.2) --- Dec99 --- TRANBACK (V0.2)

Databases (NSDC) of the Natural Planetary Satellites. ... NSDC: Database of astrometric observations of Natural Planetary Satellites . ... They are thoroughly looking for observations in different sources, creating their owndatabases which are then mostly inaccessible to other researchers. ... In the file "content" with explications, the reference is given to the data source as well as the bibliographic reference. ... Data sources. ... Why a specific bibliographic database for Natural satellites? ...

Еще в разделе: (Показать все результаты (>574) - lnfm1.sai.msu.ru/ )

• Technical Details
• HSFA 2 technical description Technical Details
• Nat.Sat.Obs.Data

... Description . ... The SCORPIO-2 project: . ... The multi-mode spectrograph SCORPIO-2 was developed using the experience of observations at the 6-m telescope BTA with the SCORPIO focal reducer . ... The focal reducer consists of several units ('floors') mounted in the common case in the following order (from the telescope focal plane): . ... The focal reducer is connected with the platform-adapter which used for guiding by offset stars and for illumination the spectrograph by calibration lamps. ...

Еще в разделе: (Показать все результаты (>1588) - jet.sao.ru/ )

• проект SCORPIO-2: parameters
• comedi_get_cmd_generic_timed
• comedi_set_buffer_size

lsst.coordConv љ unknown . ... coordConv::FK4CoordSys Class Reference . ... FK4CoordSys (double date=1950.0) . ... CoordSys (std::string const &name, double date, DateTypeEnum dateType, bool isMean , bool canConvert ) . ... convertFrom (double &toDir, double &scaleChange, CoordSys const &fromCoordSys, Coord const &fromCoord, double fromDir, Site const &site, double tai=0) const . ... virtual double coordConv::FK4CoordSys::dateFromTAI . ... virtual double coordConv::FK4CoordSys::taiFromDate . ...

Еще в разделе: (Показать все результаты (>970) - www.apo.nmsu.edu/ )

• lsst.coordConv: coordConv::OtherCoordSys Class Reference
• lsst.coordConv: coordConv::FK5CoordSys Class Reference
• lsst.coordConv: coordConv::ICRSCoordSys Class Reference

... CREATE FULLTEXT MAPPING -- binds tokens and dictionaries . ... CREATE FULLTEXT MAPPING bind token of type lexemetypename and full-text dictionaries in given configuration cfgname . ... CREATE FULLTEXT CONFIGURATION testcfg LOCALE 'testlocale' LIKE russian_utf8; CREATE FULLTEXT CONFIGURATION =# CREATE FULLTEXT MAPPING ON testcfg FOR lword,lhword,lpart_hword WITH simple,en_stem; CREATE FULLTEXT MAPPING =# \dF+ testcfg Configuration 'testcfg' Parser name: 'default' Locale: 'testlocale' Token | ...

Еще в разделе: (Показать все результаты (>2162) - www.sai.msu.su/ )

• CREATE FULLTEXT CONFIGURATION
• ALTER FULLTEXT CONFIGURATION
• CREATE FULLTEXT DICTIONARY

... Exposure Time Calculator (ETC) . ... ESO - Public Surveys . ... the recommended values to use for DIT, . ... Detector on-chip integration (DIT): seconds. to your chosen value - a separate page gives recommended values to use for DIT - for modes 1 and 2 below you may wish to start with the maximum recommended values as these will minimize the effect of read noise (a total object exposure of Y secs with DIT=X secs will produce Y/X lots of read noise) and give you a lower limit on the time needed. ...

Еще в разделе: (Показать все результаты (>28) - www.vista.ac.uk/ )

• VISTA - Visible and Infrared Survey Telescope for Astronomy
• Observing with VISTA

... SPICE System Documentation . Comprehensive set of SPICE System documentation including tutorials, subroutines and data formats descriptions, etc. Other related home pages: . Navigation and Ancillary Information Facility at JPL . MARS-96 Space Mission . ... Please, forward comments and questions about information on this page and all descending NAIF and M96 SPICE implementation pages to NAIF group at IKI . naif@arc.iki.rssi.ru . ...

Еще в разделе: (Показать все результаты (>854) - www.iki.rssi.ru/ )

• List of currently available KP AZ.
• IKI IPL home page
• Carrington's Flare