... Garage/Shop Building . ... APO Site Safety Plan . ... When in doubt, contact the Site Manager . ... In the event of an emergency , it is best to contact the Site Manager, Safety Officer , or other APO personnel listed on the APO emergency phone lists located in all control rooms and the Supply area. ... Do not enter this area without a safety briefing ; contact the Site Manager . ... Special training and safety equipment is required before handling cryogenics; contact Site Manager . ...

... The Network Time Protocol (NTP) is used to synchronize the time of a computer client or server to another server or reference time source, such as a radio or satellite receiver or modem. ... Information on the NTP architecture, protocol and algorithms can be found in the Further Information and Bibliography page. The Building and Installing the Distribution page presents an overview of the procedures for compiling the distribution and installing it on a typical client or server. ...

... Bojan Nikolic web pages (r. 329) . ... Obviously change this to approriate directory for your computer export INSTALLDIR = /home/bnikolic/temp/libairtest export BNMINVER = bnmin1-1.11 export LIBAIRVER = libair -0.18 # Install BNMin1 wget http://www.mrao.cam.ac.uk/~bn204/soft/ ${ BNMINVER } .tar.bz2 tar xjvf ${ BNMINVER } .tar.bz2 cd ${ BNMINVER } LD_LIBRARY_PATH = $ INSTALLDIR /lib:$PREREQPATH/lib \ PATH = $ INSTALLDIR /bin:$PREREQPATH/bin:$PATH \ ./configure --disable-pybind --prefix = $ ...

... To introduce you to the Python programming language, and its Visual module (VPython), which allows 3D simulation. The computer labs are held in room BOZO 112, not in the usual physics lab. ... This lab will use the Python programming language. ... Click on the Windows button in the bottom left, select "Programs", then the "A-Z" list of programs. ... Later in the course you will need to write your own VPython programs for assessment - this lab is your chance to make sure you can do this. ...

It has been a busy time farewelling old and welcoming new staff members. ... Debbie has joined us as a cleaner and Lodge assistant, while Eric will work on the antenna drives and other power control systems. ... Millimetre observing during January (summer!) term was restricted to four 12-mm proposals (one of which experienced rain) and various tests. ... During the May term, millimetre observations at Mopra will be jointly run by the ATNF and UNSW, with each allocated six weeks of observing time. ...

... LILO . ... You can pass LILO arguments at boot time, the most damaging (from a security point of view) being "image-name single" which boots Linux into single user mode, and by default in most distributions dumps you to a root prompt in a command shell with no prompting for passwords or other pesky security mechanisms. ... requires user to input a password, used in conjunction with restricted, also make sure lilo.conf is no longer world readable, or any user will be able to read the password. ...

... Science User Portal . ... ESO, the European Southern Observatory . ... Travel and Contacts . Travel to ESO Headquarters . ... Travel to E-ELT Armazones . ... Survey Telescopes . ... Star Clusters . ... Stars@ESO . ... Press Room . ... ESO Science Newsletter . ... ESO 3.6-metre telescope . ... MPG/ESO 2.2-metre telescope . ... The VLT telescopes and instruments are controlled through a gigantic series of computers, which fill a full room underneath the control room. ... cb_computer_room_dec2004 . ...

... John Butler reports that the HLF-supported programme of restoration of three historic telescopes and their domes has continued throughout the year, and that a growing collection of images showing progress with the Telescopes and Telescope Domes restoration project is available on the Armagh Observatory web-site (see http://star.arm.ac.uk/history/Domes/). ... The new dome for the 18-inch Calver Telescope is now fully operational and awaits the return of the telescope to Armagh later in 2005. ...

Next: The Details Up: USING THE AO-CONTROL GUI Previous: USING THE AO-CONTROL GUI . The data-taking computer is located in the control room in Building 1. ... If you do not have a directory, ask your FoT (Friend of the Telescope) to have a project area made for you. ... Enter your name and proposal i.d. and click ``Line'' . Choose the receiver/IFLO set-up you wish to use . ... Next: The Details Up: USING THE AO-CONTROL GUI Previous: USING THE AO-CONTROL GUI koneil@naic.edu ...