... Procedure . ... Wind Baffle Pendant Control, located in the 2.5m enclosure. Spreader Bar for wind baffle counterweights, located behind the Machine shop. ... Wind baffle frame tied to eyebolt in floor. ... Move the inner white wind baffle counterweight from the temporary mounting blocks at the front of the wind baffle frame to the standard location at the back. ... Rig the secondary truss to the overhead crane using a large shackle and 4 long nylon straps (load capacity of 1000 Lb. each). ...

... You are here: start €Ё correlator €Ё globus . ... Globus GridFTP . ... Installing GridFTP . ... The 'latest-stable' installer linked from the page above actually installs a rather old version of GridFTP, so you may wish to download a more recent version from here: http://www.globus.org/ftppub/ . ... For source installations, check that the /path/to/install/to/setup/globus/setup-globus-gridftp-sshftp command worked. correlator/globus.txt €§ Last modified: 2016/04/05 18:53 by cormac . ...

... This guide will provide the basic procedure for a "standard" wview install. ... If a package requires installation, you should use the package management utility appropriate for your OS and distribution. ... If they are, you should install the devel version in order to get the development libraries that radlib/wview needs. libz - compression library - normally included in OS distribution . ... libgd2 - graphics drawing library - may require installation - http://www.boutell.com/gd/ . ...

... SMOV4 FGS Requirements FGS Requirement 01 Guide Star Acquisition (BEA test w/FGS1,FGS2) 02 S-curve Optimization for FGS3r (AMA) 03 FGS - FGS Alignment 04 Mini-OFAD FGS3r 05 Guide Star Acq w/ FGS3r 06 Pre-SM4 FGS1, FGS2 baseline test 07 Re-commission FGS1, FGS2 (Ops and Science) 08 Near Term Stability Check on FGS3r (2 months) 09 FGS3r PMT Calibration 10 FGS3r PMT Dark Count Calibration 11 ... Enables resumption of astrometry science with FGS1r. · 4 HST orbits required....

The PROS distribution files are stored under an anonftp subdirectory at SAO. ... NOTE: All of the non-tar files (CHECKSUMS, FILES, etc) are ASCII. ... CHECKSUMS . FILES proscal_gen.tar.gz (calibration data, 8.8 Mb, compressed) ./proscal . ... FILES . ... The data (xcalr/xcale) files are in machine-dependent SUN format whereas the FITS (xrcalfits/xecalfits) files are in machine independent format. xcalr_sos_gen.tar.gz (rosat prf calibration data, 23.6 Mb, compressed) ./xray/caldata/rosat . ...

... In some cases where memory space is at a premium, it is possible to tailor the configuration to remove such features as reference clock driver support, debugging support, and so forth. ... The following lines are used in this file: . ... The DEFS_LOCAL line defines global flags that apply to all machines. Ordinarily, the only flags included are the -DDEBUG , which includes the debugging code, and -DREFCLOCK , which includes basic reference clock support. ... D_INCLUDE_BSD_SOURCE . ...

There are many important points before you begin compiling Apache. See Using Apache with Microsoft Windows before you begin. Compiling Apache requires Microsoft Visual C++ 5.0 or 6.0 to be properly installed. ... Directories tab (the Projects - VC++ Directories pane in Developer Studio 7.0) listing Executable file paths. ... os\win32\ApacheOS.dsp . ... To simplify the process, dependencies between all projects are defined in the Microsoft Visual Studio workspace file: src/Apache.dsw . ...

The distribution of SAS 6.1.0 is built on Mac OS X 10.2 (Jaguar or Darwin 6.8) but can be used without change on Mac OS X 10.3.X (Panther or Darwin 7.X.0). ... sh/ bash: . export SAS_DIR=/top_dir/xmmsas_20041122_1832 . ... export DYLD_LIBRARY_PATH=$SAS_DIR/libextra:$DYLD_LIBRARY_PATH . csh/tcsh : . ... Unfortunately this library can not be used on Mac OS X 10.3.X. Then, if you install SAS 6.1.0 on a Mac OS X 10.2 system, you do not need any additional installation of the Qt/X11 software. ...

... Apache HTTP Server Version 2.4 . ... While many distributions make Apache httpd available as operating system supported packages, it can sometimes be desirable to install and use the canonical version of Apache httpd on these systems, replacing the natively provided versions of the packages. ... This document explains how to build, install, configure and run Apache httpd 2.4 under Unix systems supporting the RPM packaging format. ... Configuring the Default Instance of Apache httpd . ...

README for XFree86 on OS/2 : Adding Variables to CONFIG.SYS . ... ETC . Set to an ETC directory. Normally, this is already set to the ETC directory of the TCP/IP code, such as SET ETC=C:\TCPIP\ETC For Warp 4 and later, this may point to the \MPTN\ directory. ... Normally you will set this variable to the same value as the HOSTNAME variable and simply add a :0.0 after it, such as SET DISPLAY=myhost:0.0 Read the X11 man page on the exact meaning of these postfixes and other options. ...