Astronet Поиск по астрономическим сайтам English Russian
       
        Точная форма слов   О проекте   Сайты   Справка
Найдено документов: 225909 (164 сайтов) ---- Время поиска: 0.46сек.   

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | След.

Показаны документы, содержащие фрагменты текста из документа
http://www.apo.nmsu.edu/Telescopes/SDSS/25Procedures/Optics/op040603rmveM2.shtml.

1. Procedure to Remove 2.5m Secondary Mirror
... Procedure . ... M2 Crate ; Location : stored at American Storage in Alamogordo; Appearance : yellow . M2 Belly Band ; Location : inside M2 crate; Appearance : polished metal circular band. ... Wind baffle removed and wind baffle support frame secured (tied down and supported with jackscrews). ... Station one person on each side of the mirror to control the light baffle. ... Put a light weight level on the spreader bar and level the spreader bar by sliding the belly band around the mirror. ...
[ Сохраненная копия ]  Ссылки http://www.apo.nmsu.edu/Telescopes/SDSS/25Procedures/ArchiveProced/op010803removeM2.shtml -- 10.9 Кб -- 03.10.2001
Похожие документы

2. td_move_nuts
... We need to replace this weight with tiedown tension to level the platform. ... When the dome (at high za) passes in front of a tiedown, this extra pretension will help not loose tension in the cable so soon. ... Kips/platformInch (no loss td tension) . ... The lower limit of the tiedown extension is around 2 inches so we might work to 3 inches. (17-3)/1.66*5=42 degF + 70 = 112 degF .. note this is the average height computation and does not include tension loss caused by the dome at high za. ...
[ Сохраненная копия ]  Ссылки http://www.naic.edu/~phil/td/adjustTdNuts_dec07.html -- 6.0 Кб -- 10.12.2007
Похожие документы
Еще в разделе: (Показать все результаты (>2840) - www.naic.edu/ )

3. Moving COS FUV Spectra to the Third COS FUV Lifetime Position
... HST . Moving COS FUV Spectra to the Third COS FUV Lifetime Position . ... HST Overview . Overview . ... Sometime near the start of Cycle 22, the location of COS FUV spectra on the detector is expected to be moved from the second COS FUV Lifetime Position (LP2) to the third COS FUV Lifetime Position (LP3). ... With the LP3 move, spectra will be shifted below the original LP1 position by about -2.5", which maximizes resolution and the detector area available for future lifetime positions. ...
[ Сохраненная копия ]  Ссылки http://www.stsci.edu/hst/cos/documents/newsletters/cos_stis_newsletters/full_stories/2014_03/COS_LP3 -- 19.7 Кб -- 12.04.2016
Похожие документы

4. As piles of ash are removed, the courtyard has the top few cm of contaminated
... As piles of ash are removed, the courtyard haтАж . Sidebar Left . Sidebar Top . No Sidebar . Sidebar Bottom . Sidebar Right . ... Title: As piles of ash are removed, the courtyard has the top few cm of contaminated soil removed as well. Description: NOTE: All images and movies are copyright and must not be reproduced or mirrored in any form without written permission. ... As piles of ash are removed, the courtyard has the top few cm of contaminated soil removed as well. ...
[ Сохраненная копия ]  Ссылки http://www.mso.anu.edu.au/gallery3/index.php/reconstruction/album36/DSCN1056 -- 31.3 Кб -- 10.04.2016
Похожие документы

5. Making a background map
... In asmooth at present sources can be removed and the local background interpolated over their positions. ... To create such a map, the user should supply asmooth , via the parameters withsrclistset and srclistset , with a list of sources produced by either eboxdetect or emldetect . ... For each source, asmooth calculates an elliptical boundary, being the locus at which the point spread function (PSF) of the source decreases to some constant value times the value of the local background. ...
[ Сохраненная копия ]  Ссылки http://xmm.vilspa.esa.es/sas/5.4.1/doc/asmooth/node10.html -- 5.6 Кб -- 10.01.2003
Похожие документы

6. ASP: Making Your Own Astronomical Camera
... The first step is to open and inspect the camera body. ... Notice that there are snap locks on both sides of the camera body, one of which should already be open since it contained the film removed by the developer. To open the camera body, peel back some of the yellow sticker identifying the camera as KODAK on the top and bottom of the camera and unsnap the plastic pieces. ... You should now have four pieces: the front cover, back cover, middle (main camera with lens), and a cylindrical spool. ...
[ Сохраненная копия ]  Ссылки http://www.astrosociety.org/edu/publications/tnl/50/camera2.html -- 10.9 Кб -- 02.10.2012
Похожие документы
Еще в разделе: (Показать все результаты (>869) - www.astrosociety.org/ )

7. http://xray.sai.msu.ru/~polar/xmgr/points.html
Operations in Point operations use the pointer to query sets about points, delete points in a set, and move points. In all cases where interaction is required, pressing the right mouse button with the pointer in the drawing area cancels the operation. ... Report on a point in a set . ... Press the left mouse button. ... Press Delete point with the left mouse button to activate. ... Move the pointer to the new location and press the left mouse button again to register the point's new location. ...
[ Сохраненная копия ]  Ссылки http://xray.sai.msu.ru/~polar/xmgr/points.html -- 4.5 Кб -- 25.08.1997
Похожие документы
Еще в разделе: (Показать все результаты (>274) - xray.sai.msu.ru/ )

8. casacore: casa::AxesMapping Class Reference
... casa . casa::AxesMapping . ... Info about mapping array axes to another order. ... AxesMapping (const IPosition &oldToNew) . Construct it with the mapping from old to new axes order. ... Get the mapping of old->new. const IPosition & . ... A value of -1 means that the old axes is ignored in the new one. ... It determines if axes are removed and/or reordered. casa::AxesMapping::AxesMapping . ... const IPosition & casa::AxesMapping::getToNew . ... const IPosition & casa::AxesMapping::getToOld . ...
[ Сохраненная копия ]  Ссылки http://www.atnf.csiro.au/computing/software/casacore/casacore-1.2.0/doc/html/classcasa_1_1AxesMapping.html -- 33.9 Кб -- 14.02.2011
Похожие документы

9. Removing files and directories
. To remove a file use the command: rm [option] filename . To remove a directory use the command: rmdir directory_name . or rm -r directory_name . You cannot retrieve a file or directory that has been removed; it has been removed permanently. Removing files . Removing directories .
[ Сохраненная копия ]  Ссылки http://comet.sai.msu.ru/UNIXhelp/tasks/rm.html -- 2.1 Кб -- 17.01.1997
Похожие документы

10. Page moved
. [Skip navigation] . University of Cambridge . Cavendish Astrophysics . Optical Interferometry . OptInt Sitemap . Publications . This page has moved. If your browser doesn't automatically redirect to its new location within a few seconds, click here . The Cavendish optical interferometry web pages are maintained by John Young <jsy1001 (at) cam.ac.uk> . Last modified: Fri Jan 11 12:35:28 GMT 2008
[ Сохраненная копия ]  Ссылки http://www.mrao.cam.ac.uk/~jsy1001/exchange/ -- 2.4 Кб -- 11.01.2008
Похожие документы