... PISTON piston . ... this command is not used by the TCC The guide camera mechanical controller sets the filter, focus and other mechanical functions, but not the position of the guide camera in the focal plane. Positioning, if available, is handled by one or two guider position axes controllers , one per axis of motion. ... Notifies the controller that subsequent commands apply to the guider mechanical controller. ... Sets the piston of the guider to the specified value (in decimal microns). ...

... The exact directions of the offsets are parallel to the rows and columns of the CCD on which the aperture is specified. ... It is often useful to explicitly specify the desired rotation of the WFPC2 field-of-view on the sky. ... Figure 7.8 shows the CCD orientation and aperture locations relative to the U3 axis. ... Obtain the Position Angle (PA) of the source axis on the sky, measured in the standard way, North through East. ... desired source angle in field-of-view measured CW from +U3 axis) . ...

... In the above example, the second region uses the global coordinate system (PHYSICAL by default). ... Supported systems include: name description ---- ----------- PHYSICAL pixel coords of original file using LTM/LTV IMAGE pixel coords of current file FK4, B1950 sky coordinate systems FK5, J2000 sky coordinate systems GALACTIC sky coordinate systems ECLIPTIC sky coordinate systems ICRS currently same as J2000 LINEAR linear wcs as defined in file In addition, two mosaic coordinate ...

Next: External Functions Up: Fitting of Data Previous: The Corrected Gauss--Newton . ... Basic functions are either defined in the system or defined by the user as external FORTRAN routines. ... Basic functions are specified by the name, the independent variable(s) and parameter(s), with optional guesses for the parameters, following the syntax: name(var1[, ];par1[, ]) [par1=value] . ... Parameters are defined by unique names after the semicolon in the function specification. ...

A typical radio dataset might be a 3-dimensional "cube" named AURORA, with axes RA, DEC and FREQ. ... These can be specified by giving the axis name(s) and grids for each subset. For instance, AURORA specifies the whole 3-dimensional ``cube''; AURORA FREQ 3 specifies the subset FREQ=3 (i.e. the RA-DEC plane at FREQ grid 3) of the set AURORA. ... Specifying only the axis name, and no grids, selects all subsets along that axis: AURORA FREQ selects all RA-DEC planes in AURORA. ... axis centre. ...

... If positions are supplied in a FITS table, specified by the parameter intable , the transformed positions are written to the FITS table designated by outtable . ... The task looks for the sky-position information stored in decimal degrees in columns named RA and DEC . If uncertainties are desired, esky2det looks by preference for data of the same format in RA_ERR and DEC_ERR columns; if neither column is found, esky2det looks for a common value in arcseconds stored in a column named RADEC_ERR . ...

... readmodel , file _char Read a model file. calcmodel Compute the model data for data sets with non-zero weight. modelchisq () Function. Return reduced of currently loaded data wrt model. binarypos ([ epoch _real [, component _char ]][, lambda = lambda ][, com = com ][, abs = abs ]) Function. ... Use today if no epoch is specified, and use the top hierarchical component if no component is specified. ... Examples: PRINT,MODELK(' A'), PRINT,MODELK(' AB'). modelpx ( component _char ) Function. ...

... Bojan Nikolic web pages (r. 329) . ... The order in which libraries to link to are passed to the linker is important . ... Many libraries use the GNU Autoconf/Automake build toolchain. ... Run the ./configure script, which looks for the various programs and libraries that the package needs . ... The simplest way is to run ./configure and make note of any complaints about missing programs or libraries that it reports. ... Some notes on the GNU toolchain . ... Passing options to configure . ...

Stellarium 0.12.3 . ... TextParams Struct Reference . Parameters specifying how to draw text. ... TextParams (const float x, const float y, const QString &string) . Construct TextParams with default parameters. ... TextParams ( Vector3 < F > &position3D, StelProjectorP projector , const QString &string) . Construct TextParams to draw text at a 3D position, using specified projector. ... string љ . ... Text string to draw. ... The required string parameter is also set, as is the projector. ...

Computer Ephemeris. Ephemeris for physical observations of the planets. Explanations. Each row of the table contains for date specified at 0h of Time Terrestrial Dynamical: . ... position angle of axis of planetary rotation (degrees) - 'P', . ... illumanated part of the disk - k, . ... position angle of disk point with minimal illumination (degrees), . longitude of central meridian of the disk (degrees) - 'merid1' - system I and so... phase correction (degrees). ...

... To mark coordinate net in plot, first select Plate in menu bar and then Coordinate net in drop-down menu. ... User has possibility to save plot of sky or to print it using standard means. To save the file select File item in menu bar and then Save As... in drop-down menu. ... To print plot of plate select File item in menu bar and then take advantage of options Print Preview , Print Setup , Print. ... To return to the list of centers click on x button in title bar. ...

... Space flight . ... Baikonur . ... Space camp . Space Hotel . ... On May 5, 1957 acceptance act of the first launch complex was signed, and as early as on May 6, 1957 the first "R-7" missile was erected on the site. The cosmodrome consists of nine launch complexes with fourteen launchers, thirty-four engineering complexes, three fuelling stations for space vehicles and two aerodromes. ... Services / Baikonur: General description Technical description Shedule of launches Photo gallery Price . ...

... Up: Description of program searchdup Previous: Program use . Input records are ordered per date of observation, and the list of known (observed) sources is cleared. Each record is compared in position to all the known sources. If the sky distance is less or equal to the specified one, the record is added to the list of observations for that source. If no known sources are within the specified radius, a new source is created, with the coordinates of the observation record. ...

... Meade Instruments Corporation . ... Autostar Computer Controller Instruction Manual . Autostar Computer Controller . ... NOTE: This manual covers both Model #495 Autostar and #497 ETX Autostar Computer Controllers. ... Autostar Primary Menus and Options . ... Chapter 3: Alignment . ... Guided Tour Menu . ... Chapter 5: Autostar Menu Functions . ... Meade Autostar Computer Controller . ... Meade #505 Connector Cable Set Manual . ... Copyright 2006 Meade Instruments Corporation, All Rights Reserved. ...

polimplot -- Plot a polarization vector map . ... inpol = "" [name] . Input linear polarization image (in %) to plot. inpopa = "" [name] . Input image for position angle of linear polarization vectors (degrees). poi_err = "" [boolean] . ... Name of corresponding polarization position angle error image (degrees). ... This task is a flexible tool for plotting a polarization vector map from two images of the polarization and the position angle of the polarization vector. ...

... The HST uses an onboard model of its orbit to perform in real-time various control functions relating to spacecraft operations and observation support. ... New coefficients for the ephemeris are updated every other day, and are archived as FITS keywords for each HST observation data set. Using these coefficients,an observer can perform a variety of calibration and characterization calculations relating to the orbital position and velocity of the telescope. ...

... All Implemented Interfaces: . ... public class Orthogonal_Views . ... void . ... public void mouseClicked (java.awt.event.MouseEvent e) . ... public void mouseEntered (java.awt.event.MouseEvent e) . ... public void mouseExited (java.awt.event.MouseEvent e) . ... public void mousePressed (java.awt.event.MouseEvent e) . ... public void mouseReleased (java.awt.event.MouseEvent e) . ... public void mouseDragged (java.awt.event.MouseEvent e) . ... public void mouseMoved (java.awt.event.MouseEvent e) . ...

ntpdate [ -bBdosu ] [ -a key ] [ -e authdelay ] [ -k keyfile ] [ -o version ] [ -p samples ] [ -t timeout ] server [ ... ] . ntpdate sets the local date and time by polling the Network Time Protocol (NTP) server(s) given as the server arguments to determine the correct time. ... A number of samples are obtained from each of the servers specified and a subset of the NTP clock filter and selection algorithms are applied to select the best of these. ... The default is /etc/ntp.keys . ...

... Choose one of the following projections (The E or C after projection names stands for Equal-Area and Conformal, respectively): CYLINDRICAL PROJECTIONS: -Jc lon0 / lat0 / scale or -JC lon0 / lat0 / width (Cassini) Give projection center and scale (1:xxxx or inch/degree). ... Jm lon0 / lat0 / scale or -JM lon0 / lat0 / width Give central meridian, standard latitude and scale along parallel (1:xxxx or inch/degree). ... Give scale along oblique equator (1:xxxx or inch/degree). ...