Multi-Frequency Synthesis in K-band . The Multi-Frequency Synthesis (MFS) permits to realize a good quality imaging of the continuum radio sources in short time. ... The RadioAstron mission will operate one K-band circular polarized channel at fixed frequency 22,232 GHz. ... In general one K-band RadioAstron channel with fixed frequency will be unchanging and compatible with all the ground radio telescopes. ... Progress of the RadioAstron Project in Pictures . ...

... The GHRS has the usual components of an astronomical spectrograph: entrance apertures, a collimator, dispersers, camera mirrors, and detectors. ... The collimator and camera mirrors are unexceptional and need no further description here (see ``The HST Focal Plane and the GHRS Apertures'' on page 73 for details). ... The first two first-order gratings, G140L and G140M, have their spectra imaged by mirror Cam-A onto detector D1, which is optimized for the shortest wavelengths. ...

... hkgtigen (hkgtigen-1.14.2) [xmmsas_20060628_1801-7.0.0] . Meta Index / Home Page / Description For each instrument standard HK parameter validity ranges are stored in the corresponding CCF constituent HKParmInt [ 2 ]. The ranges are expressed in terms of boolean selection expressions as defined by the selectlib package. ... In more detail, when invoked for a particular instrument (see parameter instrument ), hkgtigen performs the following operations to construct the single GTI data set: . ...

The Parkes 21cm Multibeam Receiver is a new facility available on the Parkes Telescope which is operated by the Australia Telescope National Facility (ATNF), CSIRO. The facility consists of a 13-beam cooled 21cm receiver system, located at the prime focus of the 64m dish. ... Completed 21cm Multibeam Receiver being hoisted up to the Parkes focus cabin. ... It is now available, in 64 MHz mode and in pulsar mode, for normal National Facility use. ... Beam 1 . Beams 2-7 . ... Frequency Range . ...

... Astrophysics Group . ... VSA . ... CAT . ... The Very Small Array is a custom-built radio telescope (operating between 26-36 GHz), designed expressly to make high resolution observations of the cosmic microwave background (CMB) radiation on angular scales around and below one degree. ... The VSA has been operated in ?compact array? and ?extended array? configurations (see the technical description below) and data collected to achieve high sensitivity in both regimes have been analysed. ... 1.75 GHz)...

... GSAOI Home . Instrument . ... The Gemini South Adaptive Optics Imager (GSAOI) is a near-infrared adaptive optics camera that will be used with the Multi-Conjugate Adaptive Optics (MCAO) system on the Gemini South 8-m telescope . ... Gemini's major instrumentation goal is to develop its Multi-Conjugate Adaptive Optics (MCAO) system for scientific use on Gemini South. ... Existing adaptive optics systems use a single natural guide star or artifical laser guide star to measure this image blur. ...

Next: Order Definition Up: Echelle Reduction Method Previous: Retrieving demonstration and . ... That is the mapping between the space wavelength, spectral order and the space sample x , line y in the raw image. ... Sections and describe the solution of this mapping. The second step in the reduction, described in Section , is to estimate the image background. ... In the rest of this Section the algorithms used in each step of the reduction are described. ...

... The file names' construction . The flight (m) stage's file set . ... the orbital data used for the flight operation monthly (m) long-term planning, . ... The orbital calculations are based on the initial orbital data determined by KIAM RAN using the orbital radio- measurement treatment. The determined initial orbital data are presented as a state vector (satellite position and velocity) in the J2000 reference. ... Accept the file with extension '.bgr', where the Moscow time (MT=UT+3h) is used. ...

... every new catalog of objects has to be contained in the UNIX directory having the same name as the catalog of objects; . ... the programs for local operations (programs of low level) with the catalog of objects are also in the same directory; . brief characteristics and names of the programs and file with the description of the catalog are stored in the file cats_descr ; . ... All astronomical catalogs have a different format and list different observables. ...

Section I: Introduction to ALFA and GALFA . Section II: System Description . ... ALFA receives 7 beams, 2 polarizations per beam, each covering 1225-1525 MHz. The 14 IF signals cover nominally the 100 to 400 MHz band. ... A high-resolution, low-bandwidth spectrometer (8K channels covering a 7 MHz bandwidth) . ... Each spectrometer board handles two polarizations from one telescope beam.The baseband signals are to be digitized by four 8-bit ADCs at 100 Msamples/sec. ... Bandwidth: . ...

makeflat -- makes flatfields corresponding to the output image of asncombine. makeflat association flatlist . ... ASCII file with list of flatfields as used by NICMOSlook. resolution . ... The ST-ECF tool NICMOSlook performs this task by determining the appropriate factor from narrow band flatfields. ... This task takes a list of flatfields in the same format as NICMOSlook, shifts and co-adds each of the flatfields in the list, and creates a new list which can be used as input for NICMOSlook. ...

... Status of the ELECTRON experiment . ... The objective of the ELECTRON experiment is to perform 3-D measurements of the plasma electrons in the energy range from 10 eV to 26000 eV, with good angular resolution, sensitivity and large dynamical range. ... Figure 1 presents the ELECTRON sensor. ... Click on the picture to view large one) . ... Figure 3 shows dynamical spectra with counting rate measurements performed by ELECTRON experiment during very multiple magnetopause crossings on February, 4, 1996...

... Observatory . ... Science . ... Science Users Information > Science Publications > Science Announcements > Description of End-to-End Operations . ... Observing Facilities . ... Observing with ESO Telescopes . ... Data Handling and Products . ... ESO Data . ... A succinct description of the ESO end-to-end science operations process, Operating the Very Large Telescope, has recently been released. The six-page PDF summarises observing time allocation, observations, data taking and archiving. ...

RTT150 . Russian-Turkish 1.5-m Telescope . ... Until 2002 observations were mostly performed with ST-8E CCD in the 1:7.7 Cassegrain focus. ... In April, 2003 telescope was equipped with a larger-size CCD Andor DW436 . ... 2048 x 2048 pixels, . ... Since summer of 2002 the main focal detector of the RTT150 telescope was AP47p CCD in 1:7.7 Cassegrain focus. ... During September 3-13, 2002 works on installation of new autoguiding system ( photo 1 ) were carried out on RTT150 telescope. ...

... This is possible at modest cost due to the low moments of inertia of the telescope and enclosure. ... This same performance will be achieved in higher winds when the telescope enclosure is facing away from the wind, or by using wind screens. ... The telescope system (MILT) will be remotely operable with an on-site operator's assistance by an astronomer located at one of the ARC member institutions. ... Mean Wind Speed . ... Offsets > 10 deg: 1 arc sec rms max . ... 5 sec max, tracking to tracking . ...

About us . ... Telescopes . ... Apart from the 6-meter telescope BTA two small telescopes are operative at SAO: the 1-m and 0.6-m telescopes, both manufactured by Carl Zeiss, Jena, are located near the BTA. ... These telescopes are used for adjusting the equipment and techniques of observations used at the BTA. ... The observational time allocation and also a brief description of the equipment of the 1-m telescope, which is used either permanently or mainly on this telescope, are presented below. ...

... are preliminary IAU-style names for ChaMP objects. Finalization of names awaits the final systematization of optical coordinates and source identification. ... The yellow regions highlight atmospheric telluric bands at ~6900A and ~7600A. The optical ID, X-ray ID, classification, and redshift are given at the top of each plot, and a series of lines are shown that are often found in sources of that given classification. ... HS limit? ... g' band magnitude; calibrated SExtractor Kron mag or limit . ...

The following papers summarize the characterization and technical performance of IBIS : . ... Characterization of Fabry-Perot interferometers and multi-etalon transmission profiles. ... Righini, A., Cavallini, F., Reardon, K. P., 2010, Astronomy and Astrophysics , 515 , A85, . ... The filter wheel is located between the two interferometers. ... The interferometers can be rapidly tuned, simultaneously, so to allow sequential scanning of the spectral lines of interest (see movie in IBIS Intro ). ...

... FTP access the basic models is here . ... Below, we put short descriptions of the used SED models for the photometric redshifts providing by the current server . ... The uniqueness of this model consists in expanding to the near IR (NIR) of Rocca-Volmerange and Guiderdoni's (1988) atlas of synthetic spectra with a revised stellar library, which includes parameters of cool stars. ... Homepage of the GISSEL model). ... Another model used earlier is the model of synthetic spectra of Poggianti (1997). ...

. This diagram illustrates the relationship between the reference pixel and device pixels (called "dots" below). The image depicts a high resolution (large dot density) laser printer output on the left and a low resolution monitor screen on the right. For the laser printer, one square reference pixel is implemented by 16 dots. For the monitor screen, one square reference pixel is implemented by a single dot. Return to image.