... WIP is an interactive package with a simple to use interface designed to produce high quality graphical output. WIP was developed as part of the Berkeley-Illinois-Maryland Association (BIMA) project and is available via anonymous ftp. ... Included in the WIP distribution is a complete manual which contains several sample figures with associated commands, a frequently asked questions section, and a descriptive listing of all available commands. ... Figure illustrates WIP's ability to handle images. ...

... Bojan Nikolic web pages (r. 329) . ... Since version 0.12, libAIR comes with a simple command line interface to the routines which retrieve the water vapour and the phase correction coefficient. Currently only the very simplest model is supported, in which the all of pressure, temperature and water vapour column are free parameters, and they are inferred from the four observed water vapour radiometer readings. ... Command line interface to libAIR and water vapour column retrieval . ...

Info on software packages that i may have messed with: . ... livedata . predict : satellite prediction software . ... share/megs/phil/x101/fftw/ . ... share/megs/phil/x101/fftw/idl . ... Neither of these will work with the zoa data. /share/megs/phil/predict . ... Idl routines to access predict is in /pkg/rsi/local/libao/phil/sat . ... Gives the az, za, time and ra,dec of the satellites. /share/megs/phil/x101/sigproc/sigproc . ... share/megs/phil/svn/pdev/pdev/psrfits/sigproc/ . ... home_~phil ...

... Intro to HST Data Handbooks 8.0 May 2011 . ... Introduction to the HST Data Handbooks > Chapter 3: Analyzing HST Data > 3.1 Analysis Options for HST Data . ... Analysis Options for HST Data . 3.1.1 IRAF/STSDAS . 3.1.2 PyRAF . 3.1.3 Python . ... STSDAS is an IRAF package developed by STScI for the reduction and analysis of HST data. ... Since PyRAF is so highly compatible with the IRAF CL, virtually all of the examples shown in this handbook will work the same for PyRAF . ...

... The only event-driven pieces of software were the user interface Hermes, the display server GIDS and the GDS server. ... Event-driven tasks are fundamentally different from procedural tasks. ... Using this event handling, a collection of routines has been built, which allows the programmer to construct a graphical user interface for a task. ... These are the events associated with user input keywords and one other event which is generated when a task is resumed after it was pausing. ...

... For many ATMs, having a good ray trace program on hand is pretty valuable. ... http://www.willbell.com . ... It is a slick Windows package with great graphics, but my most recent machine (Win95 OSR2) now encounters many error messages. ... OSLO LT : This is the freeware Windows version of OSLO - it is limited to 12 surfaces, but is otherwise amazing. ... KDP : This is another powerful, freeware Windows raytrace package. ... ZEMAX : This is yet another powerful, Windows raytrace package. ...

The idea of component-oriented programming is that in the course of implementation of various software projects a programmer (or a programmers team) accumulates a library of reused software fragments that are used in different projects. ... To solve such problems there are some special syntax means in Actor Prolog that support component-oriented programming. ... A package in Actor Prolog is a set of classes linked by implication. ... Actor Prolog supports visual component-oriented programming. ...

... The general­purpose data reduction package FIGARO is now available to be run from the IRAF CL, and more Starlink applications will follow in due course. ... A system has been developed to enable packages written for the Starlink Software Environment to be run from the IRAF CL so that an IRAF user can mix and match application tasks from the two environments as required to process data, all under the control of the IRAF CL. ... Mixing IRAF and Starlink Applications -- FIGARO under IRAF 179 3. ...

... user-defined data file formats . ... better integration with a user's analysis routines To add such functionality to SAOimage, we developed the XPA Messaging System that allows X programs to define points of public access through which data and commands can be exchanged with external programs. ... We have utilized XPA to develop "SAOimage: The Next Generation" (SAOtng), an extensible image display service that can cooperate with other processes and programs. ... SAOtng help pages . ...

... SciSim release covered by this note . ... Data-Analysis-with-SAS in a simple and standardised way, and should allow calibration experts to re-assess the reliability of the different elements of XMM-Newton simulations. ... Also, a release of all calibration files to be used in the reduction, through the SAS, of SciSim generated data, is coordinated with this release. ... Furthermore, two SAS tasks (odffix and epicproc) had to be updated to make possible a proper SAS data reduction of simulated data. ...

Distributed Software for Observations in Near Infrared V. Gavryusev 1 and C. Baffa Osservatorio Astrofisico di Arcetri E. Giani Dipartamento di Astronomia, Universit`a di Firenze Abstract. ... The processes denoted for control of hardware (telescope and other instruments) should be executed currently on PC dedicated for this task under DESQview/X, while all other components (user interface, tools for the data analysis, etc.) can work also under Unix. ... 1993, Di Giacomo et al. 1993). ...

... The ESO-MIDAS system is built along lines which should allow easy integration of complex analysis algorithms as well as allowing greater flexibility in interactive use and in the creation of user specific procedures from the basic building blocks. The first design proposal for ESO-MIDAS, made late 1980, used some ideas from the UK STARLINK project for the software interface definitions. ... It consists of the following three parts, the monitor, the applications, and the interfaces. ...

For the calibration of RATAN-600 data you will need to Download Nobeyama Fluxes (1, 2, 3.75, 9.4, 17 GHz): year 1999 2000 2001 2002 2003 . Brief description of Work Scan . Main functions of processing, realized in the program are: . ... Correction of various (not fatal) defects of data; . ... Calculating of the lower enveloping curve or an average scan from observations data for a few days; . ... COMMENT This table contains the set (TFIELDS) of 1-dimensional (TFORM# . ... AZIMUTH = 'float' / . ...

In addition to the four old program units: PROGRAM (that is the main program), SUBROUTINE, FUNCTION and BLOCK DATA , the new concept MODULE has been added, as well as some new things in the old units. ... POSITIVE NUMBERS ASSUMED TYPE(INTERVAL), INTENT(IN) :: A, B TYPE (INTERVAL) :: INTERVAL_MULTIPLICATION INTERVAL_MULTIPLICATION%LOWER = A%LOWER * B%LOWER INTERVAL_MULTIPLICATION%UPPER = A%UPPER * B%UPPER END FUNCTION INTERVAL_MULTIPLICATION FUNCTION INTERVAL_DIVISION(A, B) ! ...

XmCCD uses Motif for its graphical user interface. ... Most Linux distributions include Motif, but it may be built from source easily. ... XmCCD for SBIG would not have been possible without the universal driver libraries from SBIG . We have included a copy of an archival SBIG Linux Software Development package with the XmCCD source, other useful links are available from SBIG's Support page accessible here . SBIG homepage . ... Images are stored as Flexible Image Transport System (FITS) files. ...

Symbolic circuit-matrix processor and evaluator . ... This software is reliable over the range of benchmark circuit complexity (both *.CIR and *.MAT file). ... SYMBOL is a symbolic-algebra package which in contrast to REDUCE, MACSYMA, MAPLE, MATHEMATICA, MathLAB, MathCAD and other known multi-purpose systems is especially intended for analysis of any lumped, linear, time-invariant circuit. ... pure ASCII text . ... CIRSYM - SYMbolic CIRcuit processor used to format ASCII text file *.out for CALCSYM. ...

... Iowa Robotic Telescope | ... Talon is based on OCAAS, a software suite developed by software engineer Elwood Downey ( Clear Sky Institute ) for use at the University of Iowa ?s first remote facility (the ATF, or Automated Telescope Facility). ... XObservatory : Telescope Control Interface . ... This program calls upon and coordinates much of the interrelated portions of the Talon architecture, and forms the primary control panel for the telescope, dome, and peripheral systems when used locally. ...

Theory of filtering and time series processing L. Zotov Laboratory work ?6 Purpose: Studying singular spectral analysis SSA. We use Matlab software (look into the Lab N1). 1) Download the program and additional module for the lab from http://lnfm1.sai.msu.ru/grav/english/lecture/filtering/ Study the SSA package on examples. 2) Download and install program from http://www.gistatgroup.com/cat/cat33.exe Study it. Visit http://www.gistatgroup.com/gus/examples.html

... Perl . ... IDL is used for data analysis and graphics. ... Advantages of a language that is popular in the real world are the existence of web resources such as tutorials, a wide range of libraries of existing code you can use and modify, and better job prospects for you if you ever want to venture into the real world. ... Most data reduction systems (eg IRAF, MIDAS, Starlink) do not interface well with any programming language: IRAF has itуs own (very clunky) language in which you can write scripts...

Pulkovo NEO Page . ... EPOS Software Package . ... EPOS ( E phemeris P rogram for O bjects of the S olar system) is the Windows PC application for study and ephemeris support of observations of the Solar system objects. ... It controls the part of common data and transfers the control to one of the programs that solve the restricted set of tasks. ... So with the EPOS software package one can calculate the accurate ephemerides for many objects and get the quick illustration of their motion as well. ...