Slithead identification (which slithead is installed?) will be sensed and reported by the on-board spectrograph computer. ... Observer's software to handle spectrographic observations will be written by JHU and installed on the Fermilab supplied observatory workstation. ... UW will be responsible for the slithead latch-down control. ... Database computer at APO: The observer's software will query the observatory database for information on the currently installed fiber cartridge. ...

... Meade Instruments Corporation . ... 505 Connector Cable Set . Operating Instructions for use with the Meade? Autostar? ... The #505 Connector Cable Set provides access to three Autostar operations: . ... 2: #505 Connector Cable Set connects between two Autostar handboxes. (1) 3-foot cable. ... If you have a question concerning use of the #505 Connector Cable Set, call the Meade Instruments Customer Service Department at (949) 451-1450, or fax at (949) 451-1460. ... Autostar Downloads . ...

... We have developed an integrated system that performs astronomical observations in Near Infrared bands operating two-dimensional instruments at the Italian National Infrared Facility's ARNICA and LONGSP . ... The user interface is organized as widget-based X11 client. ... 1993; Di Giacomo et al. 1993). ... Moreover, if the interprocess communication interface includes support for networking, the software immediately becomes network distributed software. ... DESQview/X User Guide 1993, Quarterdeck . ...

Distributed Software for Observations in Near Infrared V. Gavryusev 1 and C. Baffa Osservatorio Astrofisico di Arcetri E. Giani Dipartamento di Astronomia, Universit`a di Firenze Abstract. ... The processes denoted for control of hardware (telescope and other instruments) should be executed currently on PC dedicated for this task under DESQview/X, while all other components (user interface, tools for the data analysis, etc.) can work also under Unix. ... 1993, Di Giacomo et al. 1993). ...