... In spite of the good potential possibilities, some of the station "Dnepr" design characteristics did not allow us to apply the usual special IS radar measurement methods. ... Thus for IS signal measurements at the "Dnepr" station, we have developed special methods for recording and processing IS signals in order to determine plasma ionospheric parameters. ... Equations (4-5) from the basis for data post processing to obtain ionosphere parameters. ...

... Basic Observables: Zero-differenced phase and code ionosphere-free combinations of global GNSS network stations, corrected by P1-C1 satellite code biases (cc2noncc), daily observations with 30 seconds sampling rate Sites coordinates : IGb08 reference frame coordinates and velocities Displacements: solid tides, ocean loading, pole tide loading (IERS 2010) Geometric model : Receivers antennas eccentricities, absolute receiver and ...

... CentralProcessor 0.11 documentation . ... The parameters listed here allow the user to configure the parset and the slurm job for continuum imaging of the science field. Some of the parameters can be set to blank, to allow cimager to choose appropriate values based on its ?advise? capability (which involves examining the dataset and setting appropriate values for some parameters. ... Number of CPUs to use on each core in the continuum imaging. ... User Parameters - Continuum Self-calibration . ...

... Meta Index / Home Page This section documents the parameters recognized by this task (if any). ... boolean . ... false true . If startviewer is set to true imgdisplay attempts to establish a communication link between itself and an active Ds9 / SAOtng process upon invocation. ... If withreceive is set to true output from a running Ds9 / SAOtng process (resulting from a preceding execution of commands via withcommands / commands ) shall be collected in this parameter as a list of strings. ...