... Focal reducer main parameters . Focal ratio at the 6m telescope . ... DQE (telescope+SCORPIO+CCD) . 80% in Direct Image mode . 30% in Long Slit mode . 20% in Fabry-Perot mode . Limit magnitude for images . R=26.8 (S/N=5 for Texp=1800 sec, seeing 1.5'') . Limit magnitude for low-resol. spectra . R=24.0 (S/N=10 in continuum, Texp=7200 sec) . ... Size, pixels . ... Pixel size, mkm . ... 83% Plot of the DQE . ...

... Focal reducer main parameters . Focal ratio at the 6m telescope . ... DQE (telescope+SCORPIO+CCD) . 80% in Direct Image mode . 30% in Long Slit mode . 20% in Fabry-Perot mode . Limit magnitude for images . R=26.8 (S/N=5 for Texp=1800 sec, seeing 1.5'') . Limit magnitude for low-resol. spectra . R=24.0 (S/N=10 in continuum, Texp=7200 sec) . ... Size, pixels . ... Pixel size, mkm . ... 83% Plot of the DQE . ...

... Meta Index / Home Page This section documents the parameters recognized by this task (if any). Parameter . ... yes . dataset . ... Whether to construct the OOTE image directly from the event list or indirectly from a source list. ... Name of the event list dataset used to construct the OOTE image. This parameter is read if style =`evlist'. srclisttab . ... Name of the source list dataset and table used to construct the OOTE image. ... sky . ... This parameter is read if outputstyle =`sky'. ...

Next: Setup Files Up: Frequency Catalog Previous: Frequency Catalog Contents . The parameters of the frequency file tell SCHED over what frequency range the group if usable and on which stations. Most of the parameters are the same as parameters in the setup file since they are meant for direct substitution once the correct frequency group has been identified. ... This will be matched against the station name in the setup file. The name VLBA will be a default for all VLBA stations. ...

... Apache HTTP Server Version 2.4 . ... macro_module . ... These macros have parameters. ... macro definition within a <Macro> section, following the apache style. user defined names for the macro and its parameters. macro names are case-insensitive, like apache directives. macro parameter names are case sensitive. macro parameters must have distinct names. error on empty parameter names. redefining a macro generates a warning. macro definitions can be nested... (but what for?) . ... Use of a macro: . ...

This form will calculate the count rates for a simulated direct image of ONE point source in a 512X512 FOC image with an average value for the background. ... Calculate exposure time to reach a S/N of . ... Calculate S/N reached in an exposure time of . ... Choose a spectra . ... or, created by FOCSIM that is either: . ... a Power-law: F_lambda(ergs cm -2 s -1 -1 ) = lambda ** ( ) . ... U magnitudes B magnitudes V magnitudes ergs cm -2 s -1 -1 photons cm -2 s -1 -1 at Angstroms. ...

... Parameters of the Moon-perturbed orbit . ... From orbits consistent with this limitation and with the date of the launch October 1, 2000 as an example, an orbit was selected with apogee directed to the North Galactic pole at the begining and rotation of orbit plane was maximized. The initial state vector is given in the inertial coordinate system in epoch J2000.0. ... The orbit has initial perigee radius Rp=7000.0 km, initial apogee radius Ra=343000.0 km and initial period T=8.453 days. ...

Next: Star Formation Rate and Up: No Title Previous: Calculation of Evolutionary Tracks . To start calculations, we choose the distributions of the initial binary parameters: the mass of the primary ZAMS component, , binary mass ratio, , orbital separation a . ... whereas the mass ratio distribution is not. ... The zero assumption often made is that the mass ratio distribution has a flat shape, that is binaries with a high mass ratio occur as frequently as those with equal masses. ...

Next: Absolute visual magnitudes Up: Command line procedures Previous: Plot data from the Contents . Files containing stellar parameter data reside in oyster/starbase . Extensive photometric data is found in files spec_par.X , where X signifies the luminosity classes for dwarfs, giants, and supergiants, V, III, Iab , respectively. For subgiants, brightgiants, and the subclasses of the supergiants, limited data is in files spec_MV.IV , spec_MV.II , spec_MV.Ia , spec_MV.Iab , spec_MV.Ib . ...

Next: *pllist* - Look at Up: Regions and Source Parameters Previous: Regions and Source Parameters . ... cl> xray xr> ximages xi> plcreate region description: c 6930 9390 240 reference image file or 2 dims for mask: xdata$rp110590.qp output mask data file [root.pl]: rp110590 # =rp110590.pl file . ... xi> plcreate region descriptor: saoimage # default output file from SAOimage reference image file or 2 dims for mask: xdata$rp110590.qp output