... The binary nature was remarked by Deutsch, approximate orbital elements were at first derived in Potsdam. Recently, 53 Cam was directly resolved by speckle-interferometric measurements of McAlister et al. and Balega. Combining with the spectroscopic elements the determination of the absolute values of the system parameters should be possible. In the present paper a revision of the spectroscopic orbital elements and a comparison of spectroscopic and speckle data have been carried out. ...

... ACQ-DIST Optional Parameter for FGS 1 , 2 . ACQTYPE Optional Parameter for STIS . Acquisition modes . ... Aperture Coordinate System . ... AFTER date Special Requirement . ... BINAXIS1, BINAXIS2 Optional Parameters for STIS 1 , 2 . ... BUFFER-TIME Optional Parameter for STIS . ... CHECKBOX Optional Parameter for STIS . ... Calibration Targets . ... CR-SPLIT Optional Parameter for STIS . ... DIFFUSE-CENTER Optional Parameter for STIS . ... GAIN Optional Parameter for STIS . ... Position . ...

... rotang, Date, RA, Dec, Time, accS, ast=ast, ha=ha, lst=lst, jd=jd, az=az, za=za, sep=sep, rotang=rotang, alfabeams=alfabeams . ... It is thus possible to specify, for instance: rotang, ... , ha=haHr, lst=lstHr, ast=astHr . ... alfa_angle - script to launch the GUI . alfa_ang.pro - the GUI: provides input to rotang and a graphical display of the results. rotang.pro - the main routine of the program: finds the required time, the other associated times, Az and ZA using ao_idl routines. ...

... The package AMPLE (Adaptable Minor Planet Ephemerides) is dedicated to solving a number of problems concerning minor planets with the aid of IBM-type personal computer. ... Obtaining selection of orbital elements and/ or photometric parameters of minor planets in conformity with imposed restrictions. ... The orbital elements of all minor planets used in AMPLE for 2015 have been determined in IAA on the ground of available observations in the catalogue of observations of the Minor Planet Center. ...

... A file upload element on an HTML form. ... JavaScript 1.1: added type property . ... The HTML INPUT tag, with "file" as the value of the TYPE attribute. For a given form, the JavaScript runtime engine creates appropriate FileUpload objects and puts these objects in the elements array of the corresponding Form object. ... form . ... For all FileUpload objects, the value of the type property is "file" . ... Use the value property to obtain the file name that the user typed into a FileUpload object. ...

Orbital elements of binary components in a hierachical system can be fit to either the visibility data directly or to the separation and position angle data. ... Then use Data|Astrometry to read a previously prepared file ("zetuma.psn") containing the positional data. ... Semi-major axis = 8.4214471 . Semi-minor axis = 4.7663976 . ... We can now use the Thiele-Innes method to estimate the orbital elements from this apparent ellipse and the data, as implemented with the Util|Orbit button. ...

... The HST uses an onboard model of its orbit to perform in real-time various control functions relating to spacecraft operations and observation support. ... New coefficients for the ephemeris are updated every other day, and are archived as FITS keywords for each HST observation data set. Using these coefficients,an observer can perform a variety of calibration and characterization calculations relating to the orbital position and velocity of the telescope. ...

... Circles are used to depict the source positions. ... A optional ID label can also be displayed alongside the circle, corresponding to the row num- ber of that source in the input source list. ... These circles are in fact DS9-type regions, which can be written out to a le for future use (for example, when running a later DS9 session) by setting withregionfile to true, and specifying the desired le name via the regionfile parameter. ... This is a text le containing region descriptions for each source...

... Basic Observables: Zero-differenced phase and code ionosphere-free combinations of global GNSS network stations, corrected by P1-C1 satellite code biases (cc2noncc), daily observations with 30 seconds sampling rate Sites coordinates : IGb08 reference frame coordinates and velocities Displacements: solid tides, ocean loading, pole tide loading (IERS 2010) Geometric model : Receivers antennas eccentricities, absolute receiver and ...

polimplot -- Plot a polarization vector map . ... inpol = "" [name] . Input linear polarization image (in %) to plot. inpopa = "" [name] . Input image for position angle of linear polarization vectors (degrees). poi_err = "" [boolean] . ... Name of corresponding polarization position angle error image (degrees). ... This task is a flexible tool for plotting a polarization vector map from two images of the polarization and the position angle of the polarization vector. ...

... CentralProcessor 0.11 documentation . ... Most of the time, these will be generated using the ACES footprint.py tool, and so all you need to specify are the footprint name, the position angle and pitch (separation of beams), and the frequency band you are observing in. ... If you have not loaded the ACES module, it is likely the footprint.py task will fail, and mosaicking will be disabled. ... User Parameters - Continuum Self-calibration . User Parameters - Continuum Source-finding . ...

The problem of solar wind data correlation for the observations onboard several spacecraft is very important for three points of view: . ... This problem is studied now in detail by systematic determination of ion flux and ion velocity data correlations by INTERBALL-1 (IKI group), WIND and IMP 8 (both - MIT group). ... Solar wind plasma correlation lengths from IMP 8, WIND and INTERBALL-1. ... Correlation of solar wind observations onboard several spacecraft: INTERBALL-1, IMP 8 and WIND data. ...

Next: Star Formation Rate and Up: No Title Previous: Calculation of Evolutionary Tracks . To start calculations, we choose the distributions of the initial binary parameters: the mass of the primary ZAMS component, , binary mass ratio, , orbital separation a . ... whereas the mass ratio distribution is not. ... The zero assumption often made is that the mass ratio distribution has a flat shape, that is binaries with a high mass ratio occur as frequently as those with equal masses. ...

... Column 1 gives the object name from the Case or Markarian catalogs. ... For Markarian galaxies the errors of coordinates usually lie inside 2'' (Lipovetsky [ 1983 ]). Column 4 gives the eye-estimated apparent blue magnitudes according to the same sources. ... Other names of a galaxy we give in column 7. ... In column 3 we cite the original emission-line code of the galaxy for the strength of [O III ] doublet according to the Case catalog (s - strong, m - medium, w - weak). ...

Next: Navigation Pre-Observation Products . ... SRT (Space Radio Telescope) Schedule (SRS) File . ... What: GOCG generates the Space Radio Telescope (SRT) schedule file, or SRS file, from current GSTS file. The SRS file has more precise time stamps than long-term schedules, and also designates which GTS will be used when. ... The SRS file also serves as the antenna pointing schedule file, as it describes the planned orientation of the spacecraft (and solar panels) as a function of time. ...

... These steps must be run on the qpoe file before the dewobble scripts are implemented. ... This is because the phase of the wobble is fixed to the space craft clock. c) Create an ASCII file with the listed obi start and end times. ... The IRAF script 'phase_repos' breaks up each obi of the qpoe file into a number of phase bins. Then a source centroid is calculated for each binned qpoe file. ... Each binned qpoe file is labelled by two indices, the obi and the phase number. ... Run phase_repos: . ...

... The operators will be explained as they are used. The general notion to keep in mind is that any combination of these operators results in a 2- D affine coordinate transformation in the TF plane, which may be represented using the homogeneous coordinates often used in computer graphicsfoley. ... S _t_c,f_c = g_t_c,f_c,(_t) | ... We denote a time shift to the position , with an operator that has a multiplicative law of composition : (Table 1). ... Note that these two operators do not commute. ...

THE SUBSYSTEMS OF THE MILKY WAY HALO. ... A catalogue of homogeneous fundamental astrophysical parameters for 145 globular clusters is composed on the base of the data of compilative catalogue by Harris (1997) and from another literature. ... In addition, it has large rotation velocity ( V rot =77?33 km/s), appreciable radial and vertical metallicity gradients equal by value, and has the oldest average age (subsystem of the old halo). ... Characteristic parameter of globular cluster subsystems. ...

From XEphem running the Soft03Cmt database of 20121002, for the date and time of the observation: RA: 08:16:04.25 Dec: 27:48:13 2012-09-30 UT 09:45 UTC Measured: RA: 08:16:04.4 Dec: 27:48:12.9 Header listing for HDU #1: SIMPLE = T / This is a FITS file BITPIX = -32 / NAXIS = 2 / NAXIS1 = 4341 / NUMBER OF ELEMENTS ALONG THIS AXIS NAXIS2 = 4355 / NUMBER OF ELEMENTS ALONG THIS AXIS EXTEND = T / This file may contain ...

New reduction of minor planets photographic plates obtained with Pulkovo Normal Astrograph A.A. Berezhnoy Pulkovo Observatory of RAS, Saint-Petersburg, Russia Minor Planet observations at Pulkovo Periodical observations of 14 bright asteroids named Selected Minor Planets (SMP) were performed at Pulkovo since 1948 within the international framework started by works of B.V. Numerov and D. Brouwer. ... 108 133 113 74 124 67 97 88 14 84 64 5 20 19 Epochs (YYYY.MM) 1200 Mean values of total obs. ...