... Bojan Nikolic web pages (r. 329) . ... Building CASA . ... Introduction to SCons . I have designed a prototype implementation of a build system for CASA based on the SCons tool. ... This system is experimental and not the official way of building CASA. ... The main version of the code for this build system is contained in a bzr branch, together with the remainder of the CASA system. ... Build: . ... To debug the SCons build process: . ... A prototype build system for CASA using SCons . ...

... PmWiki . ... Cookbook (addons) . ... The files in this directory include: . ... PmWiki will then analyze your system configuration and provide instructions (if needed) for creating the wiki.d/ directory which will be used to hold the pages created for your site. ... Use this method when "safe mode" is activated in the servers PHP installation. 3b. On some systems you can let PmWiki create wiki.d/ by temporarily changing the permissions on the directory containing the pmwiki.php file to 2777. ...

... Scope of Directives .htaccess Files . ... Apache is configured by placing directives in plain text configuration files. ... Any directive may be placed in any of these configuration files. ... Apache configuration files contain one directive per line. ... Directives placed in the main configuration files apply to the entire server. ... The server administrator further controls what directives may be placed in .htaccess files by configuring the AllowOverride directive in the main configuration files....

... This paper describes the main algorithms used by the Einstein Level One processing to create the exposure masks and the background maps for Einstein IPC images, and how these algorithms were recreated in the IRAF environment. Our goal was to recreate the algorithms used by the Level One Processing to create exposure masks and background maps for Einstein Image Proportional Counter (IPC) data (cf. sections 2.5 and 2.7 of Harnden et al. ...

. To remove a directory that is a symbolic link that points to another directory use the command: rm directory_name . Notice that the directory does not need to be empty and you do not have to use the rmdir command. You are not really removing a directory, just a named symbolic link that points to the "real" directory.

... The fpga code has been modularized so that different signal processors can reuse the verilog code of the different modules. ... Module constants are normally defined in module/src/Makefiles.def . ... dlpf/ : Code for DLPF module. src: Makefile.defs, mkdlpf perl script, top.v . ... plinth : holds code that is not included in sp. src: verilog code for plinth as well as Makefile.defs. build: this directory has an .edn and .edf file but no Makefile? . ... dlpf: Makefile to build dlpf module for sp . ...

... distributed/updated files; VCAL directory managed . ... export to qcweb: all files (ex hdr/fits) in $DFO_LOG_DIR/<date>; all files (ex hdr/fits, ex ps) in $DFO_PLT_DIR/<date> . ... The final directories on the DFOS systems are: $DFO_CAL_DIR/$DATE for calib data, $DFO_SCI_DIR/$DATE for science data, $DFO_PLT_DIR/$DATE for graphical information, and $DFO_LOG_DIR/$DATA for pipeline logs, association logs, trending logs, and ABs. ... 2.14 move the ABs, AB logs and processing logs to $DFO_LOG_DIR/<DATE> ...

... GPI Data Pipeline 1.0 documentation . GPI Data Pipeline Developer?s Guide . ... Release Guide: Versions, Version Tracking, etc . ... Creating a New Release Version . ... This page contains working notes for making new release copies of the pipeline. ... This needs to be changed in two places. shell> vi backbone/gpi_pipeline_version.pro shell> vi documentation/conf.py shell> svn commit backbone/gpi_pipeline_version.pro documentation/conf.py -m "increased version number to XX.YY" . ... pipeline ? ...

... Plotting in MIDAS will create a MIDAS plotfile which contains all essential plot information. By default this plotfile (metafile) љ is always created by the execution of the main plot commands. ... The SHOW/GRAPH command shows the user which is the last created plotfile. ... Names of plotfiles are a composition of the device names that is currently assigned and the MIDAS session number. ... He/she can now send the plot to a hardcopy device using the COPY/GRA command. ... send plotfile to LASER . ...

... Version 0.32 (Marco Beijersbergen) ------------ + recreated with createtestodf-1.2 scisimodf-1.4 scisim_v2.1a19991208 odffix-1.27 Version 0.31 ( JBa ) ------------ + recreated with createtestodf-1.0 scisimodf-1.0 scisim_v2.1.a19991104 odffix-1.26 Version 0.30 (MB) ------------ + recreated with createtestodf-0.23 scisimodf-0.27 scisim_v2.1.a19990917 odffix-1.24 Version 0.29 (MB) ------------ + ... Version 0.6 1998-11-19 ----------- + yet again, we had the wrong names around. ...

... Apache HTTP Server Version 2.2 . ... Apache is configured by placing directives in plain text configuration files. ... Any directive may be placed in any of these configuration files. ... Apache configuration files contain one directive per line. ... Directives placed in the main configuration files apply to the entire server. ... The server administrator further controls what directives may be placed in .htaccess files by configuring the AllowOverride directive in the main configuration files. ...

... This program was created for correlating chosen regions in the series of fts images. ... Chosen regions' . ... In this section the program counts the integral for each region of the grid for each image. ... As a matter of fact, the integral is total brightness of the region and it is counted by 'int_tabulated' IDL function. ... In addition, the program will show the count of the regions which correlate with the corresponding region (the brighter region means the bigger count) and its contour. ...

... How do have my images go into a different directory? To put your images into a directory other than the standard /export/images you MUST create the directory from the dryrot prompt. ... Create the directory with the following command dryrot: mkdir /export/images/ your directory Now when you set up the directory in spicam you need to type spicam: path /export/images/ your directory This will now put the images into your directory. ...

... Drop points . ... Pick ops use the point in a set nearest to the location of the pointer when clicked to select the set for the chosen operation. ... To activate a set, select the set number, specify the number of points in the set and click on "Accept." ... Press the button marked Accept . ... Press the button marked Accept to divide the selected set into (length of selected set) / N sets with the remainder to the last set. ... Press the button marked Accept to merge all sets to the selected set. ...

I. Installation . ... AMPLE package distributive (created with program InstallShield for Microsoft Visual C++) has been downloaded on FTP server of IAA RAS as archive Ample.zip. ... Note: If the window "file download" appears, select Open... switch button, then press OK button. ... The shortcut for AMPLE will be linked with this folder, and auxiliary files will be created here during AMPLE work. ... When running AMPLE all auxiliary and new configuration files are created in the WORK folder. ...

While we had many problems under Tiger with NFS and Finder, at least the Trash worked. ... Ostensibly, it is doing this to avoid copies across the network, but it's failing to realize that my Trash and my home directory are on the SAME network filesystem. ... I've hammered on this for a while with no success so far, but here's some things I've tried that did not work: . ... One thing is that when Tiger would touch an NFS home directory with a .Trash, it would create one. Leopard doesn't do that. ...

... Unlike clients such as Shout and IceDJ this permits the broadcast of live audio, rather than prerecorded mp3's. LiveIce was developed after the appearance of IceCast to provide the Real Time streaming functionality which makes it a viable solution for broadcasting. It is based on the guts of 2 of my previous works - Mp3Serv, the first mp3 broadcasting system & Mp3Mixer, a toy which allows the user to 'Mix' with mp3 streams. ... LiveIce XMMS sourcecode is available here . ...

... Defining New Data Types . Unions . ... Static Variables . ... struct gun { char name[50]; int magazinesize; float calibre; }; struct gun arnies; . ... struct gun { char name[50]; int magazinesize; float calibre; } arnies; . ... typedef struct gun { char name[50]; int magazinesize; float calibre; } agun; agun arnies={"Uzi",30,7}; . ... stat() { int auto_var = 0; static int static_var = 0; printf( ``auto = %d, static = %d n'', auto_var, static_var); ++auto_var; ++static_var; } . ...

Since XmCCD uses Motif, the libraries and include files must be available. ... By default it will create a directory xmccd-#.# with the command tar -xvzf xmccd-#.#.tar Set your current working directory to xmccd-#.# cd xmccd-#.# ... For "ls -l" you should see something like this -rwsr-xr-x 1 root root 281883 Mar 10 01:08 xmccd Move xmccd to a directory in your search path such as /usr/local/bin mv xmccd /usr/local/bin xmccd will use ds9 for image display if it is present. ...

... Data Archive (DA) was created in IKI in order to: . move data produced by previous mission from old 9-track magnetic tapes to modern media in order to save the data for future use; . data acquisition and distribution Interball . provide easier access to the data using IKI Local Area Network and make it reachable for external use; . ... The same facility is also used for other projects including Interball Data Archive in order to provide archival storage and access for their data. ...