Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xray.sai.msu.ru/~polar/xmgr/main.html
Дата изменения: Mon Aug 25 17:19:30 1997
Дата индексирования: Mon Oct 1 21:36:34 2012
Кодировка:
Поисковые слова: п п п п п п п п п п п п п п п п п п п п п п п п п п

Main panel

There are 5 main areas in the display, the menu bar at the top, the locator bar just below, the toolbar along the lefthand side of the display, the status bar at the bottom, and the drawing area where graphics are drawn. The following items describe the locator bar, the toolbar, and the status bar.

Tool bar
The toolbar runs along the lefthand side of the display, and provides functions to manipulate the axes scaling of active graphs, by scrolling and mouse powered zooms.
- Draw
  Click on Draw to freshenup the drawing area with the current set of graphs, parameters and active sets. Most operations perform an automatic redraw, this may be undesirable in the cases where the sets are large or there are several active graphs. By playing with the options in Graph/Draw options and using the Draw button, much of the tedium associated with slow redraw rates can be alleviated. If you feel something should have happened after performing an operation, press this button to force a draw operation to freshenup the display. If the X display being used does not do backing store, then Draw will give a clean picture if the graphics get damaged when overlaid by popups or other applications.
- Zoom
  Zoom
- Autoscale
  Click on Autoscale to generate a default scaling for both the X and Y axes in the current graph.
- Expand
  Click on Expand to incrementally zoom in on the data.
- Shrink
  Click on Shrink to incrementally zoom out from the data.
- Page left
  Click on Left to incrementally shift the axes to the left.
- Page right
  Click on Right to incrementally shift the axes to the right.
- Page down
  Click on Down to incrementally shift the axes down.
- Page up
  Click on Up to incrementally shift the axes up.
- Auto ticks
  Using any of the buttons that affect the scale of the axes, it is likely that unpleasing tickmarks will result. By clicking on AutoT, the tick spacing will be set using the current autoscaling parameters (set in Graph/Autoscale).
- Auto scale on a picked set
  Click on AutoO then click near a point in the set of interest to autoscale the current graph with respect to the selected set's bounding box.
- Zoom X
  Select a Zoom line used to scale the X axis of the current graph.
- Zoom Y
  Select a Zoom line used to scale the Y axis of the current graph.
- Auto X
  Autoscale the X axis only.
- Auto Y
  Autoscale the Y axis only.
- Push 'n zoom
  Save the current graph's axes scales and tickmark settings, and prepare for a zoom. This function can be used to zoom in on an area of interest, then restore the previous graph scale.
- Push
  Save the current graph's axes scales and tickmark settings for later retrieval. Use Pop to restore.
- Pop
  Restore the current graph's axes scale saved from the most recent use of Push.
- Cycle
  Cycle allows the contents of the current graph's world stack to be displayed in stack order. The contents of the stack are unaffected.
- Stack depth
  Report on the current depth of the stack. Each graph has its own stack.
- Current world
  When cyling through the current graph's worl stack, display the position in the stack.
- Exit
  Exit xmgr.
Locator bar The Locator bar, found directly under the main menu bar, displays the current graph and the position of the pointer. To set properties of the locator display text, see View/Locator props.
Status bar The Status bar, at the bottom of the display, reports on items of interest and provides a line of help when the mouse is used in any operation.