Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://xray.sai.msu.ru/~ivan/gmt/man/triangulate.html
Дата изменения: Fri Mar 19 17:20:40 1999 Дата индексирования: Tue Oct 2 10:08:13 2012 Кодировка: Поисковые слова: с р р с с п п р п п с с с р р п п п п п п п п п п п |
triangulate - Perform optimal Delauney triangulation and gridding
triangulate infiles [ -Dx|y ] [ -Eempty ] [ -Ggrdfile ] [ -H[nrec] ] [ -Ix_inc[m|c][/y_inc[m|c]] ] [ -Jparameters ] [ -M[flag] ] [ -Rwest/east/south/north[r] ] [ -V ] [ -Z ] [ -: ] [ -bi[s][n] ] [ -bo[s] ]
triangulate reads one or more ASCII [or binary] files (or standard input) containing x,y[,z] and performs Delauney triangulation, i.e., it find how the points should be connected to give the most equilateral triangulation possible. If a map projection is chosen then it is applied before the triangulation is calculated. By default, the output is triplets of point id numbers that make up each triangle and is written to standard output. The id numbers refer to the points position in the input file. As an option, you may choose to create a multiple segment file that can be piped through psxy to draw the triangulation network. If -G -I are set a grid will be calculated based on the surface defined by the planar triangles. The actual algorithm used in the triangulations is either that of Shewchuck [1996] or Watson [1982]. This choice is made during the GMT installation. infiles Data files with the point coordinates in ASCII (or binary; see -b). If no files are given the standard input is read.
-D Take either the x- or y-derivatives of surface represented by the planar facets (only used when -G is set). -E Set the value assigned to empty nodes when -G is set [NaN]. -G Use triangulation to grid the data onto an even grid (specified with -I, -R). Append the name of the output grid file. The interpolation is performed in the original coordinates, so if your triangles are close to the poles you are better off projecting all data to a local coordinate system before using triangulate (this is true of all gridding routines). -H Input file(s) has Header record(s). Number of header records can be changed by editing your .gmtdefaults file. If used, GMT default is 1 header record. -I x_inc [and optionally y_inc] sets the grid size for optional grid output (see -G). Append m to indicate minutes or c to indicate seconds. -J Selects the map projection. Scale is inch/degree, 1:xxxxx, or width in inch (upper case modifier). CYLINDRICAL PROJECTIONS: -Jclon0/lat0/scale (Cassini) -Jjlon0/scale (Miller) -Jmscale (Mercator - Greenwich and Equator as origin) -Jmlon0/lat0/scale (Mercator - Give meridian and standard parallel) -Joalon0/lat0/azimuth/scale (Oblique Mercator - point and azimuth) -Joblon0/lat0/lon1/lat1/scale (Oblique Mercator - two points) -Joclon0/lat0/lonp/latp/scale (Oblique Mercator - point and pole) -Jqlon0/scale (Equidistant Cylindrical Projection (Plate Carree)) -Jtlon0/scale (TM - Transverse Mercator) -Juzone/scale (UTM - Universal Transverse Mercator) -Jylon0/lats/scale (Basic Cylindrical Projection) AZIMUTHAL PROJECTIONS: -Jalon0/lat0/scale (Lambert). -Jelon0/lat0/scale (Equidistant). -Jflon0/lat0/horizon/scale (Gnomonic). -Jglon0/lat0/scale (Orthographic). -Jslon0/lat0/scale (General Stereographic) CONIC PROJECTIONS: -Jblon0/lat0/lat1/lat2/scale (Albers) -Jllon0/lat0/lat1/lat2/scale (Lambert) MISCELLANEOUS PROJECTIONS: -Jhlon0/scale (Hammer) -Jilon0/scale (Sinusoidal) -Jklon0/scale (Eckert VI) -Jnlon0/scale (Robinson) -Jrlon0/scale (Winkel Tripel) -Jwlon0/scale (Mollweide) NON-GEOGRAPHICAL PROJECTIONS: -Jpscale (Linear projection for polar (theta,r) coordinates) -Jxx-scale[l|ppow][/y-scale[l|ppow]] (Linear, log, and power scaling) More details can be found in the psbasemap manpages. -M Output triangulation network as multiple line segments separated by a record whose first character is flag [>]. To plot, use psxy with the -M option (see Examples). -R west, east, south, and north specify the Region of interest. To specify boundaries in degrees and minutes [and seconds], use the dd:mm[:ss] format. Append r if lower left and upper right map coordinates are given instead of wesn. -V Selects verbose mode, which will send progress reports to stderr [Default runs "silently"]. -Z Controls whether binary data file has two or three columns [2]. Ignored if -b is not set. -: Toggles between (longitude,latitude) and (latitude,longitude) input/output. [Default is (longitude,latitude)]. -bi Selects binary input. Append s for single precision [Default is double]. Append n for the number of columns in the binary file(s). [Default is 2 input columns]. -bo Selects binary output. Append s for single precision [Default is double]. Node ids are stored as binary 4-byte integer triplets. -bo is ignored if -M is selected.
To triangulate the points in the file samples.xyz, store the triangle information in a binary file, and make a grid for the given area and spacing, try triangulate samples.xyz -bo -R0/30/0/30 -I2 -Gsurf.grd > samples.ijk To draw the optimal Delauney triangulation network based on the same file using a 6-inch-wide Mercator map, try triangulate samples.xyz -M -R-100/-90/30/34 -JM6i | psxy -M -R-100/- 90/30/34 -JM6i -W0.5p -B1 > network.ps
gmt, pscontour
Watson, D. F., 1982, Acord: Automatic contouring of raw data, Comp. & Geosci., 8, 97-101. Shewchuck, J. R., 1996, Triangle: Engineering a 2D Quality Mesh Generator and Delaunay Triangulator, First Workshop on Applied Computational Geometry (Philadelphia, PA), 124-133, ACM, May 1996. www.cs.cmu.edu/~quake/triangle.html