Документ взят из кэша поисковой машины. Адрес
оригинального документа
: http://xray.sai.msu.ru/~ivan/gmt/man/grdvolume.html
Дата изменения: Fri Mar 19 17:20:09 1999 Дата индексирования: Tue Oct 2 07:36:20 2012 Кодировка: Поисковые слова: reflection nebula |
grdvolume - Calculating volume under a surface within a contour
grdvolume grdfile [ -Ccval or -Clow/high/delta ] [ -Lbase ] [ -Rwest/east/south/north[r] ] [ -S[k] ] [ -T ] [ -V[l] ] [ -Zfact[/delta] ]
grdvolume reads a 2-D binary grd file and calculates the volume contained between the surface and the plane specified by the given contour (or zero if not given). Alternatively, specify a range of contours to be tried and grdvolume will determine the volume and area inside the contour for all contour values. The contour that produced the maximum mean height (volume/area) is reported as well. This feature may be used with grdfilter in designing an Optimal Robust Separator [Wessel, 1998]. grdfile The name of the input 2-D binary grd file.
No space between the option flag and the associated arguments. -C find area and volume inside the cval contour. Alternatively, search using all contours from low to high in steps of delta. [Default returns entire area and volume of grid]. -L Also add in the volume from the level of the contour down to base [Default base is contour]. -S Convert degrees to meters, append k for km [Default is Cartesian]. -T Use curvature minimum rather than maximum height to find best contour value (when contour search is selected with -C). -R west, east, south, and north specify the Region of interest. To specify boundaries in degrees and minutes [and seconds], use the dd:mm[:ss] format. Append r if lower left and upper right map coordinates are given instead of wesn. -V Selects verbose mode, which will send progress reports to stderr [Default runs "silently"]. Append l to see all the results for each contour level tested (when contour search has been selected). -Z Optionally subtract shift before scaling data by fact. [Default is no scaling]. (Numbers in -C, -L refer to values after this scaling has occurred).
To determine the volume in km^3 under the surface hawaii_topo.grd (height in km), try grdvolume hawaii_topo.grd -Sk To find the volume between the surface peaks.grd and the contour z = 250, use grdvolume peaks.grd -Sk -C250 To search for the contour, between 100 and 300 in steps of 10, that maximizes the ratio of volume to surface area for the file peaks.grd, use grdvolume peaks.grd -Sk -C100/300/10 > results.d
gmt, grdfilter
Wessel, P., 1998, An empirical method for optimal robust regional- residual separation of geophysical data, Math. Geol., 30(4), 391-408.