Документ взят из кэша поисковой машины. Адрес оригинального документа : http://xmm.vilspa.esa.es/scisim/release/latest/config/telescope-2.cfg Дата изменения: Wed Jan 12 13:11:18 2005 Дата индексирования: Sat Dec 22 14:26:42 2007 Кодировка: Поисковые слова: dust

# additional SCISIM configuration file
#
# This file defines default values for the telesope 2, which consists of
# XRB4 X-ray baffle #4
# MM4 mirror module FM4
# RGA1 reflection grating array FM1
# RFC2 reflection grating focal camera FM2 (==> RGS2)
# EMOS2 EPIC MOS camera 2
#
# Comments:
#
# MSIM:
# . for the time being only FM1 is completely validated, and
# also is the most accurate descitpion of all mirror modules
# . all XRB's are modeled identically
#
# ESIM/EPIC
# . insufficient data from the EPIC MOS cameras are
# available at this time, and we use the expected parameters
#
# RFCSIM/RFC
# . as with the EPIC cameras we have insufficient data to
# describe the CCD performance
# . we use for both RFC's the same parameter
#
#
# General:
#
# As detailed descriptions become available, we will modify these
# default configuration files.
#
# C. Erd, 29-Oct 1999


begin

msim_config begin
estimatedRays 0 # dummy

extended 0 # whether to show extended widgets, 0/1

overrule 3 # 0:none 1:ideal 2:precalc 3:accurate

models begin # path of model files
fm1 fm1model_xrb_f7492.9_v1.dat
fm4 fm4model_xrb_f7493.3_v1.dat
end

model fm1 # choice of model

raytraceMode 1 # 0=photon 1=ray

transform 0 # whether to use rotation, transl and scale, 0/1
rotation.x 0 # rotation axis
rotation.y 1
rotation.z 0
rotation.angle 0 # deg
translation.x 0 # mm
translation.y 0
translation.z 0
scale 1

historyFile none # 'none' produces no history file

mediumDensity 1 # reduced density of gold/nickel, 0/1

mirrorBackReflect 2 # 0:off 1:specular 2:fast 3:exact
mirrorFrontReflect 2
reflect 2 # reflections other than mirror shells

reflectCoefficient 1 # take reflection coeff into account, 0/1
reflectDust 1 # use dust shadowing, 0/1
reflectTransmission 1 # use transmission table, 0/1

disteps 1e-7 # distance tolerance (mm)

parabolicRollOff 1 # analytical rolloff at parabolic side, 0/1
intersectionRollOff 1 # analytical rolloff in intersection, 0/1
hyperbolicRollOff 1 # analytical rolloff at hyperb side, 0/1

fourierLegendre 1 # use Fourier-Legendre distortions, 0/1
tableDistortion 1 # use tabular distortions, 0/1
polynomialDistortion 1 # use polynomial distortions, 0/1

shellMisalign 1 # misalign shells, 0/1
sectionMisalign 1 # misalign sections other than shells, 0/1
xbaffleTolerance 1 # random position and radius of rings, 0/1

distortShape 1 # distort the shape of the mirrors, 0/1
distortNormal 1 # distort the normal of the mirrors, 0/1

precalc 0 # precalculate the shape in a table, 0/1
xPoints 300 # nr of axial points in precalculated table
phiPoints 32 # nr of azimuthal points in precalculated table

seed 0 # 0:use time

debug 1 # 0:off 1:sparse 2:verbose 3:full
end

rgasim_config begin
estimatedRays 0 # dummy

raytraceMode 1
seed 0 # seed for photonmode

# telescope coordinates w.r.t. space-craft coordinates
# note: camera coordinates w.r.t. telescope can be found
# in "lincoordFile" file, in the 'models' section!
rotation.x 0
rotation.y 0
rotation.z 0
rotation.angle 0
translation.x 0
translation.y 0
translation.z 0
scale 1
transform 0

historyFile none

simulation 2 # 0:user specified 1:ideal 2:realistic


model rga1 # 'none' means transparent

models begin

rga1 begin
henke_dataFile Henke_data.dat
gratposFile gratpos_14jul97.dat
braceposFile bracepos.dat
gratpresentFile gratpresent_braces.dat
errorbudgetFile errorbudget.dat
gratscatterFile gratscatter.dat
gratscatterFileGratings grat_scatter_rga1.dat
gratNonflatFile grat_nonflat_rga1.dat
gratEfficiencyFile new_efficiency_7-8_35.table
maskFile RGAmask.dat
cornerdisplFile grat_corner_pert_FM1_GRadj.dat
#cornerdisplFile grat_corner_pert_FM1.dat
lincoordFile RGS2_LINCOORD_0001_SCISIM.CCF
end

end

gratEff 2 # 0=absorb 1=always one 2= energy/angle dependend
backEff 2 # 0=absorb 1=always one 2= SiC energy/angle

maskTransparent 0

# orders begin +2 +1 0 -1 -2 -3 -4 -5 end
orders begin 0 -1 -2 -3 end

grscatter 2 # 0=off; 1=random; 2=small angle per grating as
# measured in gratscatterFileGratings

main 1 # mainswitch for error budget on-off
linespError 1
Rx 1
Ry 1
Rz 1
Tx 1
Ty 1
Tz 1
RxBow 1
RxWarp 1
RyBow 2 # 0=off; 1=random bow; 2=measurements from gratNonflatFile
RyWarp 1
initshake 1
ishakeMoveGrat 1 # really move grat on init shake (not just s-normal)
shakePerRay 0
useMeasuredCornerDispl 1 # use corner displacentment File

effWarnings 0 # 0= no warnings from TableGratingEfficiency
verbose 0 # 0= off 1=low 2=normal 3=high 4=lots 5=trace

# advanced settings
intensInIsOne 0 # set intensity incomming rays to 1
debugAlpha 0 # write debug info with angles on grating to file
extraCheckLeaveRGA 1 # 1= perform extra check in BetweenGratingProcess
gapGuess 1 # turn on guessing top gap. Faster, same accuracy
debugGapGuess 0 # write debug file with Guess gap info
end

esim_config begin
estimatedRays 0 # dummy

raytraceMode 0
seed 0 # seed for photonmode

# telescope coordinates w.r.t. space-craft coordinates
# note: camera coordinates w.r.t. telescope can be found
# in "coordinates" file, as specified above!
rotation.x 0
rotation.y 0
rotation.z 0
rotation.angle 0
translation.x 0
translation.y 0
translation.z 0
scale 1
transform 0

historyFile none

option begin
# 0 = off, 1 = on
smear_effect 1 # apply smearing during read-out of image
dark_noise 1 # use amplifier DC in calculations
amplifier_noise 1 # use amplifier noise in calculations
subtract_background 1 # use 1st frames for bg calculateion
analyse_all_frames 1 # also analyse frames without contents
pattern_match 1 # use library for event reconstruction
end

filters begin # map of filters {mos,pn}
none none
open filterOpen.dat
thin filterThin.dat
medium filterMedium.dat
thick filterThick.dat
closed filterClosed.dat
end
filter thin # uses filters[filter]

mode PrimeFullWindow # uses modes[mode] of camera
camera EMOS2 # uses cameras[camera]
cameras begin
EMOS2 begin
temperature 183 # of the camera
files begin
onBoardSrc none # RFC only
coordinates EMOS2_LINCOORD_0008_SCISIM.CCF # SAS CCF file
clock mos_clocks.dat # map of ccd clocking
surface mos_surface.dat # dead surface layers before sense-layers
doping mos_doping.dat # doping profiles,cce etc..
sigmaScales sigmaScales.dat # re-distribution of cloud-sigmas
gradePatterns mos_pattern.dat # mos pattern library
materials begin # data file containing material properties
silicon.dat
oxide.dat
nitride.dat
end
end

modes begin # map of ccd modes
PrimeFullWindow begin
# {id,mode,sub-mode,x0,y0,dx,dy,xBin,yBin,nodeSelect,clocking}
begin 1 prime full 0 0 600 600 1 1 0 default end
begin 2 prime full 0 0 600 600 1 1 0 default end
begin 3 prime full 0 0 600 600 1 1 0 default end
begin 4 prime full 0 0 600 600 1 1 0 default end
begin 5 prime full 0 0 600 600 1 1 0 default end
begin 6 prime full 0 0 600 600 1 1 0 default end
begin 7 prime full 0 0 600 600 1 1 0 default end
end
PrimePartialW2 begin
begin 1 prime window 250 250 110 100 1 1 0 default end
begin 2 prime full 0 0 600 600 1 1 0 default end
begin 3 prime full 0 0 600 600 1 1 0 default end
begin 4 prime full 0 0 600 600 1 1 0 default end
begin 5 prime full 0 0 600 600 1 1 0 default end
begin 6 prime full 0 0 600 600 1 1 0 default end
begin 7 prime full 0 0 600 600 1 1 0 default end
end
PrimePartialW3 begin
begin 1 prime window 150 150 310 300 1 1 0 default end
begin 2 prime full 0 0 600 600 1 1 0 default end
begin 3 prime full 0 0 600 600 1 1 0 default end
begin 4 prime full 0 0 600 600 1 1 0 default end
begin 5 prime full 0 0 600 600 1 1 0 default end
begin 6 prime full 0 0 600 600 1 1 0 default end
begin 7 prime full 0 0 600 600 1 1 0 default end
end
FastModeUncompressed begin
begin 1 fast - 0 0 600 600 1 100 0 default end
begin 2 prime full 0 0 600 600 1 1 0 default end
begin 3 prime full 0 0 600 600 1 1 0 default end
begin 4 prime full 0 0 600 600 1 1 0 default end
begin 5 prime full 0 0 600 600 1 1 0 default end
begin 6 prime full 0 0 600 600 1 1 0 default end
begin 7 prime full 0 0 600 600 1 1 0 default end
end
end

global begin
cam_type mos # mos,pn,rfc
n_ccds 7 # no. of ccds in camera
n_nodes 2 # no. of read-out nodes per ccd
pixel_size 40. # pixelSize [um] at 293.15 K
columns 600 # (..)
rows 600
omega 0 # only used by PN:<0-15> see Modes document
dead_space 175. # border around image [um] at 293.15 K
illumination front
end
ccds begin
begin
id 1 # ccd id
parameter begin # basic parameters of a ccd
pixelSurface PixelGateSurfaces # file.surface[pixelSurface]
doping default # use file.doping[doping]
subtract_level -1 # neg.: calc. background per pixel
# pos.: fixed number to subtract
dark_current 1 # e/pixel/s
background_frames 1 # no. of frames used for bg calc.
elevation 0 # w.r.t. center of focal plane [um]
temperature 183 # of ccd
lower_treshold 5 # #*sigmaNoise
accept_treshold -1 # #*sigmaNoise (only RFC)
upper_treshold -1 # not implemented yet
end
nodes begin
# node id gain(ADU/e) noise(e) cteSerial cteParallel
begin 0 0.911 4.0 0.99998 0.999973 end
end
end
begin
id 2 # ccd id
parameter begin # basic parameters of a ccd
pixelSurface PixelGateSurfaces # file.surface[pixelSurface]
doping default # use file.doping[doping]
subtract_level -1 # neg.: calc. background per pixel
# pos.: fixed number to subtract
dark_current 1 # e/pixel/s
background_frames 1 # no. of frames used for bg calc.
elevation 0 # w.r.t. center of focal plane [um]
temperature 183 # of ccd
lower_treshold 5 # #*sigmaNoise
accept_treshold -1 # #*sigmaNoise (only RFC)
upper_treshold -1 # not implemented yet
end
nodes begin
# node id gain(ADU/e) noise(e) cteSerial cteParallel
begin 0 0.9136 4.0 0.99998 0.999968 end
end
end
begin
id 3 # ccd id
parameter begin # basic parameters of a ccd
pixelSurface PixelGateSurfaces # file.surface[pixelSurface]
doping default # use file.doping[doping]
subtract_level -1 # neg.: calc. background per pixel
# pos.: fixed number to subtract
dark_current 1 # e/pixel/s
background_frames 1 # no. of frames used for bg calc.
elevation 0 # w.r.t. center of focal plane [um]
temperature 183 # of ccd
lower_treshold 5 # #*sigmaNoise
accept_treshold -1 # #*sigmaNoise (only RFC)
upper_treshold -1 # not implemented yet
end
nodes begin
# node id gain(ADU/e) noise(e) cteSerial cteParallel
begin 0 0.9186 4.0 0.99998 0.999968 end
end
end
begin
id 4 # ccd id
parameter begin # basic parameters of a ccd
pixelSurface PixelGateSurfaces # file.surface[pixelSurface]
doping default # use file.doping[doping]
subtract_level -1 # neg.: calc. background per pixel
# pos.: fixed number to subtract
dark_current 1 # e/pixel/s
background_frames 1 # no. of frames used for bg calc.
elevation 0 # w.r.t. center of focal plane [um]
temperature 183 # of ccd
lower_treshold 5 # #*sigmaNoise
accept_treshold -1 # #*sigmaNoise (only RFC)
upper_treshold -1 # not implemented yet
end
nodes begin
# node id gain(ADU/e) noise(e) cteSerial cteParallel
begin 0 0.9127 4.0 0.99998 0.999973 end
end
end
begin
id 5 # ccd id
parameter begin # basic parameters of a ccd
pixelSurface PixelGateSurfaces # file.surface[pixelSurface]
doping default # use file.doping[doping]
subtract_level -1 # neg.: calc. background per pixel
# pos.: fixed number to subtract
dark_current 1 # e/pixel/s
background_frames 1 # no. of frames used for bg calc.
elevation 0 # w.r.t. center of focal plane [um]
temperature 183 # of ccd
lower_treshold 5 # #*sigmaNoise
accept_treshold -1 # #*sigmaNoise (only RFC)
upper_treshold -1 # not implemented yet
end
nodes begin
# node id gain(ADU/e) noise(e) cteSerial cteParallel
begin 0 0.9141 4.0 0.99998 0.999973 end
end
end
begin
id 6 # ccd id
parameter begin # basic parameters of a ccd
pixelSurface PixelGateSurfaces # file.surface[pixelSurface]
doping default # use file.doping[doping]
subtract_level -1 # neg.: calc. background per pixel
# pos.: fixed number to subtract
dark_current 1 # e/pixel/s
background_frames 1 # no. of frames used for bg calc.
elevation 0 # w.r.t. center of focal plane [um]
temperature 183 # of ccd
lower_treshold 5 # #*sigmaNoise
accept_treshold -1 # #*sigmaNoise (only RFC)
upper_treshold -1 # not implemented yet
end
nodes begin
# node id gain(ADU/e) noise(e) cteSerial cteParallel
begin 0 0.9178 4.0 0.99998 0.999973 end
end
end
begin
id 7 # ccd id
parameter begin # basic parameters of a ccd
pixelSurface PixelGateSurfaces # file.surface[pixelSurface]
doping default # use file.doping[doping]
subtract_level -1 # neg.: calc. background per pixel
# pos.: fixed number to subtract
dark_current 1 # e/pixel/s
background_frames 1 # no. of frames used for bg calc.
elevation 0 # w.r.t. center of focal plane [um]
temperature 183 # of ccd
lower_treshold 5 # #*sigmaNoise
accept_treshold -1 # #*sigmaNoise (only RFC)
upper_treshold -1 # not implemented yet
end
nodes begin
# node id gain(ADU/e) noise(e) cteSerial cteParallel
begin 0 0.8922 4.0 0.99998 0.999973 end
end
end
end
end
end

timeProcess 1 # puts time info of the simulator on output
debug none
end

rfcsim_config begin
##
## SciSim configuration file used to test the RGS CCDs
##
## Giuseppe Vacanti Thu Oct 16 10:31:29 1997
##

## ---------------------------------------------------------
## Default configuration: flight camera, 3x3 on-chip binning
## ---------------------------------------------------------
camera RGS2
mode Spectroscopy_3x3ocb(Baseline)
debug none
filter none # Don't change
timeProcess 1

# Simulation options

option begin
amplifier_noise 1 # use amp noise in calculations?
analyse_all_frames 1 # analyse frames without X-rays?
dark_noise 1 # use dark current in calculations?
pattern_match 0 # reconstruct events?
smear_effect 1 # smearing during read out?
subtract_background 0 # background subtraction? (RFC=0)
end

## -------------------------------------------------------------
## Possible camera configurations:
##
## - RGS2 : current guess for flight
##
## -------------------------------------------------------------

cameras begin

## -------------------------------------
## RGS2: this is the flight camera-1
##
## Possible modes:
## Spectroscopy_3x3ocb(Baseline),Spectroscopy_1x1ocb,
## HTR_SingleCcd(5), HTR_MultipleCcds(ALL)
## -------------------------------------

RGS2 begin
temperature 183 # of the camera

ccds begin

begin

## ------------------------------------------------
## CCD 1
## gain, noise and CTE set from SRON CCD 6111-13-02
## ------------------------------------------------
id 1

nodes begin

begin 0 2.045 5.4 0.999951 0.99999 end
begin 1 2.045 5.4 0.999951 0.99999 end

end

# CCD parameters
# --------------
parameter begin
accept_treshold 5
lower_treshold 4
upper_treshold -1
temperature 183
elevation -1.90430
background_frames 0
dark_current 2.2e-2 # e/s (1x1 pixel)
doping default
subtract_level 0
pixelSurface PixelBackSurfaceCcd1
end

end # CCD id 1
begin

## ------------------------------------------------
## CCD 2
## gain, noise and CTE set from SRON CCD 6111-13-02
## ------------------------------------------------
id 2

nodes begin

begin 0 2.045 5.4 0.999951 0.99999 end
begin 1 2.045 5.4 0.999951 0.99999 end

end

# CCD parameters
# --------------
parameter begin
accept_treshold 5
lower_treshold 4
upper_treshold -1
temperature 183
elevation -1.07080
background_frames 0
dark_current 2.2e-2 # e/s (1x1 pixel)
doping default
subtract_level 0
pixelSurface PixelBackSurfaceCcd2
end

end # CCD id 2
begin

## ------------------------------------------------
## CCD 3
## gain, noise and CTE set from SRON CCD 6111-13-02
## ------------------------------------------------
id 3

nodes begin

begin 0 2.045 5.4 0.999951 0.99999 end
begin 1 2.045 5.4 0.999951 0.99999 end

end

# CCD parameters
# --------------
parameter begin
accept_treshold 5
lower_treshold 4
upper_treshold -1
temperature 183
elevation -0.476074
background_frames 0
dark_current 2.2e-2 # e/s (1x1 pixel)
doping default
subtract_level 0
pixelSurface PixelBackSurfaceCcd3
end

end # CCD id 3
begin

## ------------------------------------------------
## CCD 4
## gain, noise and CTE set from SRON CCD 6111-13-02
## ------------------------------------------------
id 4

nodes begin

begin 0 2.045 5.4 0.999951 0.99999 end
begin 1 2.045 5.4 0.999951 0.99999 end

end

# CCD parameters
# --------------
parameter begin
accept_treshold 5
lower_treshold 4
upper_treshold -1
temperature 183
elevation -0.118896
background_frames 0
dark_current 2.2e-2 # e/s (1x1 pixel)
doping default
subtract_level 0
pixelSurface PixelBackSurfaceCcd4
end

end # CCD id 4
begin

## ------------------------------------------------
## CCD 5
## gain, noise and CTE set from SRON CCD 6111-13-02
## ------------------------------------------------
id 5

nodes begin

begin 0 2.045 5.4 0.999951 0.99999 end
begin 1 2.045 5.4 0.999951 0.99999 end

end

# CCD parameters
# --------------
parameter begin
accept_treshold 5
lower_treshold 4
upper_treshold -1
temperature 183
elevation 0.0
background_frames 0
dark_current 2.2e-2 # e/s (1x1 pixel)
doping default
subtract_level 0
pixelSurface PixelBackSurfaceCcd5
end

end # CCD id 5
begin

## ------------------------------------------------
## CCD 6
## gain, noise and CTE set from SRON CCD 6111-13-02
## ------------------------------------------------
id 6

nodes begin

begin 0 2.045 5.4 0.999951 0.99999 end
begin 1 2.045 5.4 0.999951 0.99999 end

end

# CCD parameters
# --------------
parameter begin
accept_treshold 5
lower_treshold 4
upper_treshold -1
temperature 183
elevation -0.118896
background_frames 0
dark_current 2.2e-2 # e/s (1x1 pixel)
doping default
subtract_level 0
pixelSurface PixelBackSurfaceCcd6
end

end # CCD id 6
begin

## ------------------------------------------------
## CCD 7
## gain, noise and CTE set from SRON CCD 6111-13-02
## ------------------------------------------------
id 7

nodes begin

begin 0 2.045 5.4 0.999951 0.99999 end
begin 1 2.045 5.4 0.999951 0.99999 end

end

# CCD parameters
# --------------
parameter begin
accept_treshold 5
lower_treshold 4
upper_treshold -1
temperature 183
elevation -0.476074
background_frames 0
dark_current 2.2e-2 # e/s (1x1 pixel)
doping default
subtract_level 0
pixelSurface PixelBackSurfaceCcd7
end

end # CCD id 7
begin

## ------------------------------------------------
## CCD 8
## gain, noise and CTE set from SRON CCD 6111-13-02
## ------------------------------------------------
id 8

nodes begin

begin 0 2.045 5.4 0.999951 0.99999 end
begin 1 2.045 5.4 0.999951 0.99999 end

end

# CCD parameters
# --------------
parameter begin
accept_treshold 5
lower_treshold 4
upper_treshold -1
temperature 183
elevation -1.07080
background_frames 0
dark_current 2.2e-2 # e/s (1x1 pixel)
doping default
subtract_level 0
pixelSurface PixelBackSurfaceCcd8
end

end # CCD id 8
begin

## ------------------------------------------------
## CCD 9
## gain, noise and CTE set from SRON CCD 6111-13-02
## ------------------------------------------------
id 9

nodes begin

begin 0 2.045 5.4 0.999951 0.99999 end
begin 1 2.045 5.4 0.999951 0.99999 end

end

# CCD parameters
# --------------
parameter begin
accept_treshold 5
lower_treshold 4
upper_treshold -1
temperature 183
elevation -1.90430
background_frames 0
dark_current 2.2e-2 # e/s (1x1 pixel)
doping default
subtract_level 0
pixelSurface PixelBackSurfaceCcd9
end

end # CCD id 9

end # ccds

modes begin

# Each mode line contains:
#
# CCD id
# operational mode (prime/fast)
# sub operational mode (full/window)
# lower left X coordinate of window
# lower left Y coordinate of window
# extent in X
# extent in Y
# binning in X
# binning in Y
# clocking mode
#
Spectroscopy_1x1ocb begin
begin 1 prime full 0 0 1024 384 1 1 2 default end
begin 2 prime full 0 0 1024 384 1 1 2 default end
begin 3 prime full 0 0 1024 384 1 1 2 default end
begin 4 prime full 0 0 1024 384 1 1 2 default end
begin 5 prime full 0 0 1024 384 1 1 2 default end
begin 6 prime full 0 0 1024 384 1 1 2 default end
begin 7 prime full 0 0 1024 384 1 1 2 default end
begin 8 prime full 0 0 1024 384 1 1 2 default end
begin 9 prime full 0 0 1024 384 1 1 2 default end
end
Spectroscopy_3x3ocb(Baseline) begin
begin 1 prime full 0 0 1024 384 3 3 2 default end
begin 2 prime full 0 0 1024 384 3 3 2 default end
begin 3 prime full 0 0 1024 384 3 3 2 default end
begin 4 prime full 0 0 1024 384 3 3 2 default end
begin 5 prime full 0 0 1024 384 3 3 2 default end
begin 6 prime full 0 0 1024 384 3 3 2 default end
begin 7 prime full 0 0 1024 384 3 3 2 default end
begin 8 prime full 0 0 1024 384 3 3 2 default end
begin 9 prime full 0 0 1024 384 3 3 2 default end
end
HTR_SingleCcd(5) begin
begin 5 fast - 0 0 1024 384 1 74 2 default end
end
HTR_MultipleCcds(ALL) begin
begin 1 fast - 0 0 1024 384 1 74 2 default end
begin 2 fast - 0 0 1024 384 1 74 2 default end
begin 3 fast - 0 0 1024 384 1 74 2 default end
begin 4 fast - 0 0 1024 384 1 74 2 default end
begin 5 fast - 0 0 1024 384 1 74 2 default end
begin 6 fast - 0 0 1024 384 1 74 2 default end
begin 7 fast - 0 0 1024 384 1 74 2 default end
begin 8 fast - 0 0 1024 384 1 74 2 default end
begin 9 fast - 0 0 1024 384 1 74 2 default end
end
end # modes

# RFC files
files begin
onBoardSrc rfc_OnBoardSrc.dat # on-board sources
coordinates RGS2_LINCOORD_0001_SCISIM.CCF # SAS CCF file
clock rfc_clocks.dat
doping rfc_doping.dat
gradePatterns none
materials begin
silicon.dat
oxide.dat
nitride.dat
aluminium.dat
magnesium.dat
magnesiumfluoride.dat
aluminiumoxide.dat
end
sigmaScales sigmaScales.dat
surface rfc_surface.dat
end

# Parameters that apply to all CCDs in the camera
global begin
cam_type rfc
columns 1024
dead_space 150 # microns
illumination back
n_ccds 9
n_nodes 2
omega 0
pixel_size 27 # microns
rows 384
end

end # rfc_flight
end # cameras

# Filter wheel description (none for RFC)
# ---------------------------------------
filters begin
none none
end


## -------------------------------------
## Other options not related to the CCDs
## -------------------------------------

estimatedRays 0

historyFile none

raytraceMode 0
seed 0 # seed for photonmode

# --------------
# simulator line-up
# --------------

# telescope coordinates w.r.t. space-craft coordinates
# note: camera coordinates w.r.t. telescope can be found
# in "coordinates" file, as specified above!
rotation.x 0
rotation.y 0
rotation.z 0
rotation.angle 0
translation.x 0
translation.y 0
translation.z 0
scale 1
transform 0

end

end